Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

A Novel Magnetic Polyethylene Glycol Nanocomposite based on Graphite Reinforcement Carbon Paste Electrode for Voltammetric Determination of Perindopril L-arginine

Journal of Analytical Chemistry - The present study reports the development of a magnetic polyethylene glycol nanocomposite based on graphite reinforcement carbon paste electrode for the sensitive...     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Development of the ANN–KIM composed model to predict the nanofluid energetic thermal conductivity via various types of nano-powders dispersed in oil

Journal of Thermal Analysis and Calorimetry - Artificial neural network/kriging interpolation method optimization method which is evaluated concerned the hybrid nanofluid composed of iron oxide...     

Synthesis of a new class of uridine phosphorylase inhibitors

A new series of potent uridine phosphorylase inhibitors have been prepared from barbituric acid. Among them, 1-[(2-hydroxyethoxy)methyl]-5-)(m--benzyloxy)benzylbarbituric acid ( 37 , BBBA) is the most promising having a K_i value of 1.1 ± 0.2 nM with uridine phosphorylase from human liver. The new inhibitors are easily synthesized and are better inhibitors of human uridine phosphorylase than their uracil counterparts.     

The canalicular structure of compact bone in the rat at different ages.

Osteocytes communicate through a canalicular system that maintains the vitality and mineral metabolism of bone. Casting the vascular canals and canaliculi of compact bone with methacrylate and viewing them with scanning electron microscopy shows their extent and relationships. Confocal laser scanning microscopy of the same specimen before corrosion establishes the degree of calcification of the different tissue components. These methods were used to compare basal with alveolar compact bone in the rat mandible at different ages. Sections of the mandibular molar region were placed in a methacrylate resin. After polymerization and study with confocal microscopy, the organic matrix was removed. Juvenile rats had large irregular central vascular canals and lacunae that were more concentric in the basal than the alveolar bone. Cast lacunae were round, and the canaliculi from these lacunae were short and thick in both bones. Adult rats had regular concentrically arranged lacunae in the basal bone. Cast lacunae were ellipsoid and flatter in the basal bone than in the alveolar bone. The intercommunicating canaliculi were increased and canaliculi had more branching than the juvenile rats. The aged rats had fewer vascular canals, lacunae, and canaliculi and had osteoporotic changes. The cast lacunae were slender and flat especially in the basal bone. The porosity of the mandible became more pronounced in the alveolar than in the basal bone with aging. The canaliculi of mandibular compact bone thinned and developed extensive branching with adulthood but decreased in size and number with advanced age. Lacunae proceed from the large circular structures of youth to the flat forms of the aged. These studies show that the internal structure of compact bone changes with age and mirrors its functional state.     

Polarization inscription in ferroelectric (111) PZT and (100) SBT films

Ferroelectric thin films form an equilibrium domain structure compatible with their respective crystallographic symmetry. In tetragonal (111) PZT, 90° domains prevail; in (pseudo-tetragonal) (100) SBT both 90° and 180° domains are present. The size of 90° domains has been measured for e.g., PZT as slabs of 15 nm width. Domain size is a result of stress minimization in the film during the paraelectric (PE) → ferroelectric (FE) transition. A precise and regular domain pattern for (111) PZT and (100) SBT films has been investigated in detail by TMSFM. Single domains can be addressed mechanically with the tip of an AFM. Such single domain switching corresponds to a data storage density of 200 Gbit/inch². Applications of ferroelectric and high- paraelectric materials for e.g., non-volatile data storage replacing DRAM devices or as sensors in infrared cameras are increasingly becoming popular.