Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes

A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using ¹H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10^?2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10^?1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004     

Discrete and Continuous Time Modulated Random Walks with Heavy-Tailed Increments

We consider a modulated process S which, conditional on a background process X, has independent increments. Assuming that S drifts to −∞ and that its increments (jumps) are heavy-tailed (in a sense made precise in the paper), we exhibit natural conditions under which the asymptotics of the tail distribution of the overall maximum of S can be computed. We present results in discrete and in continuous time. In particular, in the absence of modulation, the process S in continuous time reduces to a Lévy process with heavy-tailed Lévy measure. A central point of the paper is that we make full use of the so-called “principle of a single big jump” in order to obtain both upper and lower bounds. Thus, the proofs are entirely probabilistic. The paper is motivated by queueing and Lévy stochastic networks.     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Theoretical analysis of singlet and triplet excited states of nickel porphyrins

Local density and generalized gradient approximation time-dependent density functional methods have been used for calculation of the singlet and triplet excited states of nickel-porphine, Ni-tetraphenyloporphine, and Ni-octaethyloporphyrine. Special attention is paid to metal-ligand transitions and d-d transitions. It is shown that the lowest exited singlet states of the three compounds can be described as a transfer of an electron from the porphine ring to the d(x2-y2) orbital of the nickel atom. On the other hand, the lowest excited triplet state arises from promotion of an electron between two nickel d orbitals, an occupied d(z2) and an empty d(x2-y2). It is proposed that a rapid quenching of the excited singlet states is due to an ultrafast intersystem crossing between 1Eg)and 3Eg or 3B1g states.     

Rhodopsin reconstituted into a planar-supported lipid bilayer retains photoactivity after cross-linking polymerization of lipid monomers

Transmembrane proteins (TMPs), particularly ion channels and receptors, play key roles in transport and signal transduction. Many of these proteins are pharmacologically important and therefore targets for drug discovery. TMPs can be reconstituted in planar-supported lipid bilayers (PSLBs), which has led to development of TMP-based biosensors and biochips. However, PSLBs composed of natural lipids lack the high stability desired for many technological applications. One strategy is to use synthetic lipid monomers that can be polymerized to form robust bilayers. A key question is how lipid polymerization affects TMP structure and activity. In this study, we have examined the effects of UV polymerization of bis-Sorbylphosphatidylcholine (bis-SorbPC) on the photoactivation of reconstituted bovine rhodopsin (Rho), a model G-protein-coupled receptor. Plasmon-waveguide resonance spectroscopy (PWR) was used to compare the degree of Rho incorporation and activation in fluid and poly(lipid) PSLBs. The results show that reconstitution of Rho into a supported lipid bilayer composed only of bis-SorbPC, followed by photoinduced lipid cross-linking, does not measurably diminish protein function.     

Fast spatially localised electrooptical mode in vertically aligned nematic LCs with negative dielectric anisotropy

ABSTRACT

Electro-optical switching and the liquid crystal (LC) director distribution are studied in spatially periodic electric field for vertically aligned LC with negative dielectric anisotropy. Two electro-optical switching modes characterised by different switching times are observed. These modes are well distinguished optically by choosing proper geometry for the polarisers axes orientation. One of these modes is significantly faster as compared to the other. The fast switching is explained in terms of localised near-to-surface director reorientation. The 3D-numerical simulation shows very good agreement with the experiment: it points out the existence of the disclination lines and field-stabilised walls responsible for the localised director field switching and its relaxation. Possibilities of enhancing the fast mode for high-speed light modulators are discussed.     

Adaptive efficient estimation for generalized semi-Markov big data models

Annals of the Institute of Statistical Mathematics - In this paper we study generalized semi-Markov high dimension regression models in continuous time, observed at fixed discrete time moments. The...     

Quantitative measurements of recombinant HIV surface glycoprotein 120 binding to several glycosphingolipids expressed in planar supported lipid bilayers

The interaction of recombinant HIV-1 surface glycoprotein gp120 (rgp120) with natural isolates of lactosylceramide (LacCer), glucosylceramide (GlcCer), and galactosylceramide (GalCer) has been quantitatively measured under equilibrium conditions using total internal reflection fluorescence (TIRF) spectroscopy. The binding affinity (K(a)) of rgp120 to these glycosphingolipids (GSLs), reconstituted at 5 mol % in supported planar lipid bilayers composed of 95 mol % POPC, is ca. 10(6) M(-1) for dissolved rgp120 concentrations greater than 25 nM. In contrast, at concentrations of rgp120 between 0.2 and 15 nM, rgp120 does not bind significantly to LacCer and GlcCer, but has a high affinity for GalCer with a measured K(a) value of 1.6 x 10(9) M(-1). However, protein surface coverage measurements show that this strong binding process accounts for very little of the total protein adsorbed over the entire concentration range studied. At a protein concentration of ca. 20 nM, the surface coverage is only 3% of that achieved at apparent saturation (i.e., when the protein concentration is ca. 220 nM). Thus the "high affinity" binding sites comprise only a small fraction of the total number of binding sites. Several other variables were investigated. Rgp120 binding behavior at membranes doped with alpha-hydroxygalactosylceramide (alpha-GalCer) was very similar to that observed with GalCer, showing that the presence/absence of an alpha-hydroxy moiety does not significantly affect galactosylceramide recognition. Phase segregation of GalCer, which occurs when the mole fraction of this GSL in a POPC bilayer exceeds ca. 0.1, was also investigated and showed no effect on binding affinity at low rgp120 concentrations. To investigate the influence of fatty acid chain length, GSLs with monodisperse C(18) and C(24) chain lengths, both with and without an alpha-hydroxy moiety, were synthesized, and their binding affinity to rgp120 was examined. Relative to the natural isolates (which contain a mixture of chain lengths), minimal differences were observed; thus among the compounds tested, fatty acid chain length does not affect GSL recognition. The results of this work should aid efforts to design anti-HIV-1 agents based on membrane-tethered, carbohydrate-based receptors for rgp120.