Hot dense capsule-implosion cores produced by Z-pinch dynamic Hohlraum radiation

Hot dense capsule implosions driven by Z-pinch x rays have been measured using a approximately 220 eV dynamic Hohlraum to implode 1.7-2.1 mm diameter gas-filled CH capsules. The capsules absorbed up to approximately 20 kJ of x rays. Argon tracer atom spectra were used to measure the T(e) approximately 1 keV electron temperature and the n(e) approximately 1-4 x 10(23) cm(-3) electron density. Spectra from multiple directions provide core symmetry estimates. Computer simulations agree well with the peak emission values of T(e), n(e), and symmetry, indicating reasonable understanding of the Hohlraum and implosion physics.     

Time- and space-resolved spectroscopy of dynamic hohlraum interiors

A dynamic hohlraum is created when an annular z-pinch plasma implodes onto a cylindrical 0.014 g/cc 6-mm-diameter CH₂ foam. The impact launches a radiating shock that propagates toward the axis at 350 μm/ns. The radiation trapped by the tungsten z-pinch plasma forms a 200 eV hohlraum that provides X-rays for indirect drive inertial confinement fusion capsule implosion experiments. We are developing the ability to diagnose the hohlraum interior using emission and absorption spectroscopy of Si atoms added as a tracer to the central portion of the foam. Time- and space-resolved Si spectra are recorded with an elliptical crystal spectrometer viewing the cylindrical hohlraum end-on. A rectangular aperture at the end of the hohlraum restricts the field of view so that the 1D spectrometer resolution corresponds approximately to the hohlraum radial direction. This enables distinguishing between spectra from the unshocked radiation-heated foam and from the shocked foam. Typical spectral lines observed include the Si Lyα with its He-like satellites and the He-like resonance sequence including Heα, Heβ, and Heγ, along with some of their associated Li-like satellites. Work is in progress to infer the hohlraum conditions using collisional–radiative modeling that accounts for the radiation environment and includes both opacity effects and detailed Stark broadening calculations. These 6-mm-scale radiation-heated plasmas might eventually also prove suitable for testing Stark broadening line profile calculations or for opacity measurements.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

Radiating shock measurements in the Z-pinch dynamic hohlraum

The Z-pinch dynamic hohlraum is an x-ray source for high energy-density physics studies that is heated by a radiating shock to radiation temperatures >200 eV. The time-dependent 300-400 eV electron temperature and 15-35 mg/cc density of this shock have been measured for the first time using space-resolved Si tracer spectroscopy. The shock x-ray emission is inferred from these measurements to exceed 50 TW, delivering >180 kJ to the hohlraum.     

关于K个复相关矩阵相等的检验

§ 1.Ｉｎｔｒｏｄｕｃｔｉｏｎ　ＷｅａｒｅｇｉｖｅｎｋｉｎｄｅｐｅｎｄｅｎｔＷｉｓｈａｒｔｄｅｎｓｉｔｉｅｓｏｆｔｈｅ (ｐ +ｑ)× (ｐ +ｑ)ｒａｎｄｏｍｓｙｍｍｅｔｒｉｃｐｏｓｉｔｉｖｅｄｅｆｉｎｉｔｅｍａｔｒｉｃｅｓＧ1,… ,Ｇｋｔｏｂｅｇ(Ｇｉ) =Ｋｅｘｐ -12 ｔｒＲ- 1ｉ Ｇｉ Ｇｉ12 (ｎｉ- ｑ-ｐ- 1) ,(1 )ｗｈｅｒｅｉ=1 ,… ,ｋ,ａｎｄＲｉｄｅｎｏｔｅｓｔｈｅｐｏｐｕｌａｔｉｏｎｃｏｒｒｅｌａｔｉｏｎｍａｔｒｉｘｏｆｔｈｅｉ ｔｈｐｏｐｕｌａｔｉｏｎａｎｄＫａｓａｇｅｎｅｒｉｃｌｅｔｔｅｒｄｅｎｏｔｅ…     

Measurements of magneto-Rayleigh-Taylor instability growth during the implosion of initially solid Al tubes driven by the 20-MA, 100-ns Z facility

The first controlled experiments measuring the growth of the magneto-Rayleigh-Taylor instability in fast (～100 ns) Z-pinch plasmas are reported. Sinusoidal perturbations on the surface of an initially solid Al tube (liner) with wavelengths of 25-400 μm were used to seed the instability. Radiographs with 15 μm resolution captured the evolution of the outer liner surface. Comparisons with numerical radiation magnetohydrodynamic simulations show remarkably good agreement down to 50 μm wavelengths.     

Efficient solid phase synthesis of benzo[1,2,3]thiadiazoles and related structures

The first solid-phase synthesis of benzo[1,2,3]thiadiazoles was achieved by starting from resin bound ortho bromo or iodo triazenes and using a functionalization on cleavage.     

Deterministic Ratchets for Particle Separation Fabricated With Si MEMS Technology

This paper presents the design, fabrication and testing of deterministic ratchets which are used for fractionation purpose. Ratchets with different configuration are prepared to determine particle trajectories with different sizes. Silicon based MEMS technology is used to fabricate devices containing arrays of obstacles with varying size, spacing and number. The arrays of high aspect ratio, 7-20μm wide, silicon pillars are defined and etched in 60 to 80μm deep microchannels using Deep Reactive Ion Etching (DRIE). The working modes of the ratchets are demonstrated using colloidal suspensions of latex particles which have an average diameter ranging between 2 and 6μm.