Refolding of Laccase in Dilution Additive Mode with Copper-Based Ionic Liquid

Ionic liquids (ILs) are molten salts which do not crystallize at room temperature. Tunable physicochemical properties of ILs including hydrophobicity and polarity facilitate their applications in many biological processes. In this study, a copper-based IL was employed in order to enhance the refolding efficiency of laccase from Trametes versicolor which requires copper as a cofactor. When 1-ethyl-3-methylimidazolium trichlorocuprate ([EMIM][CuCl₃]) was added to refolding buffer instead of urea, the laccase refolding yield was improved more than 2.7 times compared to the conventional refolding buffer which contains urea. When the refolding of laccase was carried out at different temperatures (4, 25, and 37 °C), the highest refolding yield was obtained at 25 °C. At low temperature, two conflicting effects, i.e., suppression of the aggregate formation and decrease of folding rate, influence the protein refolding. In contrast, a copper-based IL did not enhance the refolding of lysozyme, a non-copper-containing protein. From these results, we can conclude that this copper-based IL, [EMIM][CuCl₃], was exclusively effective on the refolding process of a copper-containing protein.     

Abnormal adsorption behavior of dimethyl disulfide on gold surfaces

Adsorption of dimethyl disulfide (DMDS) on gold colloidal nanoparticle surfaces has been examined to check its binding mechanism. Differently from previous results, DMDS molecules adsorbed on the gold surface at high concentration showed the S–S stretching band at 500 cm⁻¹ in surface-enhanced Raman scattering (SERS) spectra, which indicates the presence of intact adsorption of DMDS molecules. However, it was found that the S–S bond of disulfides was easily cleaved on the gold surface at low concentration. These behaviors were not observed for diethyl disulfide (DEDS) or diphenyl disulfide (DPDS). Our results indicate that DMDS molecules with the shortest alkyl chains on the gold surface can be inserted into self-assembled monolayers (SAMs) without the S–S bond cleavage during self-assembly due to insufficient lateral van der Waals interaction and the low adsorption activity of disulfides, whereas DEDS with longer alkyl chains or DPDS with the weak disulfide bond dissociation energy would not. These unusual DMDS adsorption behaviors were examined by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). We also compared the bonding dissociation energy of the S–S bonds of various disulfides by means of a density functional theory (DFT) calculation.     

Selective growth of ZnO nanodots prepared by metalorganic chemical vapor deposition on focused-ion beam-nanopatterned substrates

Selective formation of ZnO nanodots grown by metalorganic chemical vapor deposition (MOCVD) was achieved on focused-ion beam (FIB)-nanopatterned SiO₂ and Si substrates. The selective formation characteristics, dimension, and density of ZnO nanodots on FIB-nanopatterned substrates strongly depended on the FIB-patterning and MOCVD-growth conditions. The mechanism of the selective formation of ZnO nanodots on FIB-nanopatterned SiO₂ substrates is attributed to a surfactant effect of the implanted Ga which leads to the formation of the preferred nucleation sites for the growth of ZnO nanodots, while that of ZnO nanodots on nanopatterned Si substrates is mainly considered in terms of the generation of surface atomic steps and kinks, which are created by Ga⁺ ion sputtering, on the patterned Si areas.     

Ray Model of an Incident Gaussian Beam for Analyzing a Micro-Optical Communication Device with a GRIN Lens System

For the design of reliable micro-optical devices with a high coupling efficiency, a source-modeling method necessary for ray tracing is newly proposed. This method is based on the ray-division of an incident wavefront estimated by Gaussian beam optics. The simulation result obtained using the proposed method was compared with those of the conventional methods, and its accuracy was confirmed by the experimental results. Finally, the method was used to design a micro-optical device with two GRIN lenses and a thin-film filter.     

A facile and simple method for the preparation of copoly(TEAMPS/VP)/silver nanocomposites for the humidity-sensing membranes

We developed a simple method for the preparation of polyelectrolyte/silver nanocomposites, where silver nanoparticles were dispersed in a polyelectrolyte. Copoly(TEAMPS/VP)/silver (w/w=100/0, 100/1, 100/2, 100/3 and 100/4) nanocomposites were obtained by a thermal decomposition reaction of silver carbamate complex at 130 degrees C, and well-dispersed silver colloids were stabilized by copolymer of tetraethylammonium 2-acrylamido-2-methyl-1-propanesulfonate (TEAMPS) and N-vinylpyrrolidone (VP). A dark brown solution in its UV-vis absorption spectrum showed surface plasmon resonance absorption bands at 420 nm in solution. The silver precursor and the resulting polyelectrolyte/Ag nanocomposite was characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), infrared (IR), transmission electron microscopy (TEM). In addition the humidity-sensing properties using copoly(TEAMPS/VP)/Ag nanocomposite films were examined.     

Improving precursor adsorption characteristics in ATR-FTIR spectroscopy with a ZrO2 nanoparticle coating

Journal of Nanoparticle Research - Transparent superhydrophobic coatings, which are highly desired for the protection of material surfaces, have been limited to particular kinds of materials, e.g....     

Characterization of wafer-scale MoS2 and WSe2 2D films by spectroscopic ellipsometry

Here, we present the spectroscopic ellipsometry investigation of synthetically grown wafer-scale two-dimensional (2D) MoS₂ and WSe₂ films to access quality and thickness uniformity. MoS₂ and WSe₂ samples were grown by chemical vapor deposition and atomic layer deposition, respectively. Complex dielectric function ($\epsilon ={\epsilon }_1+i{\epsilon }_2$) and thickness information of these 2D films were extracted from the measured data using multilayer optical calculations. Broad spectral range (1.2–6 eV) and multiple angles of incidence were used to reduce correlations among fitting parameter. Lineshape of ε of MoS₂ and WSe₂ monolayer films are consistent with literature but shows higher values, suggests better quality of our samples. Eight-inch wafer size MoS₂ monolayer sample shows ～ 70% uniformity with an average thickness of 0.65 ± 0.2 nm, and three-layer WSe₂ sample of 8 × 1 cm² area shows ～ 80% uniformity with an average thickness of 2.5 ± 0.4 nm. Our results will be helpful to accelerate commercialization process of 2D devices.     

Enhanced refolding of lysozyme with imidazolium-based room temperature ionic liquids: Effect of hydrophobicity and sulfur residue

The expression of recombinant proteins in microorganism frequently leads to the formation of insoluble aggregates, inclusion bodies (IBs). Thus, the additional in vitro protein refolding process is required to convert inactive IBs into water-soluble active proteins. This study investigated the effect of sulfur residue and hydrophobicity of imidazolium-based room temperature ionic liquids (RTILs) on the refolding of lysozyme as a model protein in the batch dilution method which is the most commonly used refolding method. When lysozyme was refolded in the refolding buffer containing [BF4]-based RTILs with a systematic variety of alkyl chain on cations varying from two to eight, less hydrophobic imidazolium cations having shorter alkyl chains were effective to facilitate lysozyme refolding. Compared to the conventional refolding buffer, 2 times higher lysozyme refolding yield was obtained in 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) containing refolding buffer. The refolding yield of lysozyme was even more increased by 2.5 times when 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MS]) containing sulfur residue on anion was used. The sulfur residue in [BMIM][MS] is supposed to improve the refolding yield of lysozyme which has 4 intramolecular disulfide bonds. For dilution-based refolding of lysozyme, the optimum concentrations of RTILs in refolding buffer were found to be 1.0 M [EMIM][BF4] and 0.5 M [BMIM][MS], respectively. The optimum temperate for dilution-based refolding of lysozyme with RTILs was 4 °C.     

A new synthetic route to 7H-imidazo[1,2-b][1,2,4]triazoles

The reaction of benzil 1-ureidoethylidene hydrazones 8 with a mixture of triphenylphosphine, carbon tetrachloride, and triethylamine provides a general route to 7H-imidazo[1,2-b][1,2,4]triazoles 18 via the thermal reaction of the expected keto azine carbodiimide intermediates 13, and the structure of 18 was confirmed by X-ray crystallographic analysis.     

Surface-enhanced Raman scattering and density functional theory calculation of uracil on gold and silver nanoparticle surfaces

The adsorption structure of uracil on gold and silver nanoparticle surfaces has been comparatively studied by means of surface-enhanced Raman scattering (SERS). Uracil appeared to assume a perpendicular orientation with respect to the surfaces. The presence of the nu(CH) band in the SERS spectra indicated a vertical orientation of the aromatic ring of uracil on Au and Ag. The density functional theory (DFT) calculation was performed at the levels of B3LYP and MP2 to estimate the energetic stability of the N3- and N1-deprotonated tautomers and their vibrational frequencies on the surfaces. Almost all the vibrational bands in the SERS spectra at high concentrations could be ascribed to the N3-deprotonated uracil. The N3-deprotonated tautomer was predicted to be more favorable on Au than on Ag from the DFT calculation. The metal-N bond distance was assumed to be shorter for Au than for Ag upon adsorption of uracil.