Carbon precipitation and diffusion in SiGeC alloys under silicon self-interstitial injection

In this work we investigate the diffusion and precipitation of supersaturated substitutional carbon in 200-nm-thick SiGeC layers buried under a silicon cap layer of 40 nm. The samples were annealed in either inert (N₂) or oxidizing (O₂) ambient at 850 °C for times ranging from 2 to 10 h. The silicon self-interstitial (I) flux coming from the surface under oxidation enhances the C diffusion with respect to the N₂-annealed samples. In the early stages of the oxidation process, the loss of C from the SiGeC layer by diffusion across the layer/cap interface dominates. This phenomenon saturates after an initial period (2–4 h), which depends on the C concentration. This saturation is due to the formation and growth of C-containing precipitates that are promoted by the I injection and act as a sink for mobile C atoms. The influence of carbon concentration on the competition between precipitation and diffusion is discussed. Received: 19 October 2001 / Accepted: 19 December 2001 / Published online: 20 March 2002 / Published online: 20 March 2002     

Automatic continuity and representation of group homomorphisms defined between groups of continuous functions

Let C(X,G) be the group of continuous functions from a topological space X into a topological group G with pointwise multiplication as the composition law, endowed with the uniform convergence topology. To what extent does the group structure of C(X,G) determine the topology of X? More generally, when does the existence of a group homomorphism H between the groups C(X,G) and C(Y,G) implies that there is a continuous map h of Y into X such that H is canonically represented by h? We prove that, for any topological group G and compact spaces X and Y, every non-vanishing C-isomorphism (defined below) H of C(X,G) into C(Y,G) is automatically continuous and can be canonically represented by a continuous map h of Y into X. Some applications to specific groups and examples are given in the paper.     

Automatic detection and identification of shocks in Gaussian state‐space models: a Bayesian approach

An automatic monitoring and intervention algorithm that permits the supervision of very general aspects in an univariate linear Gaussian state–space model is proposed. The algorithm makes use of a model comparison and selection approach within a Bayesian framework. In addition, this algorithm incorporates the possibility of eliminating earlier interventions when subsequent evidence against them comes to light. Finally, the procedure is illustrated with two empirical examples taken from the literature. Copyright © 2005 John Wiley & Sons, Ltd.     

On the polarization of non-paraxial transverse fields

On the basis of a plane-wave spectrum representation, the polarization features of a transverse quasimonochromatic non-paraxial field have been studied. A relationship has been established between the polarization characteristics in the near field and the coherence and symmetry properties of the beam in the far field.     

MgO films grown on yttria-stabilized zirconia by molecular beam epitaxy

MgO films were grown on (0 0 1) yttria-stabilized zirconia (YSZ) substrates by molecular beam epitaxy (MBE). The crystalline structures of these films were investigated using X-ray diffraction and transmission electron microscopy. Growth temperature was varied from 350 to 550 °C, with crystalline quality being improved at higher temperatures. The MgO films had a domain structure: (1 1 1)[1 1 2¯]_MgO(0 0 1)[1 0 0]_YSZ with four twin variants related by a 90° in-plane rotation about the [1 1 1]_MgO axis. The observed epitaxial orientation was compared to previous reports of films grown by pulsed laser deposition and sputtering and explained as resulting in the lowest interface energy.     

Development and Validation of a High-Performance Thin-Layer Chromatographic Method,with Densitometry,for Quantitative Analysis of Tizoxanide (a Metabolite of Nitazoxanide) in Human Plasma

JPC – Journal of Planar Chromatography – Modern TLC - A new simple, rapid, and selective high-performance thin-layer chromatographic (HPTLC) method with metronidazole as the internal...     

Application of time-of-flight mass spectrometry to the analysis of phototransformation products of diclofenac in water under natural sunlight

Exact mass capabilities of time-of-flight (TOF) mass spectrometry along with other mass spectrometric techniques have been evaluated to elucidate a complete range of dichlofenac phototransformation products. Photolysis experiments with diclofenac in water under direct solar irradiation were performed to characterise the main phototransformation products generated and to determine their stability. Photolysis experiments were performed in both demineralised water and reconstructed standard freshwater. Samples were extracted before analysis by solid phase extraction (SPE) with Oasis HLB and MAX cartridges. Separation and identification of the transformation products were accomplished by the combined use of gas chromatography-mass spectrometry (GC/MS) and liquid chromatography coupled with time-of-flight mass spectrometry (LC/TOFMS). Both techniques provided complementary information that enabled the identification of 13 phototransformation products. Six of them were identified by GC/MS through the structural information provided by the full scan mass spectra obtained under electron impact (EI) ionisation and the confirmation of the molecular mass provided by positive chemical ionisation (PCI) analyses. Accurate mass measurements obtained by LC/TOFMS provided the elucidation of seven polar transformation products. The low mass error observed (<2 ppm) enabled the assignment of highly probable empirical formulas as well as identification of a process dimerisation route. The photoproducts identified demonstrated that photolysis of diclofenac occurs by two main routes. One is the consequence of the initial photocyclisation of diclofenac into carbazole derivatives. The other route goes through the initial decarboxilation of diclofenac and further oxidation of the alkyl-chain, which are typical photolytic process reactions. The main photoproduct identified was 8-chloro-9H-carbazole-1yl-acetic acid.     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

A mew method of synthesis of 1,2,3,4-telrahydro-5H-5-oxo-1,4-benzodiazepines

A new one-step facile method for the synthesis of 1,12,3,4-tetrahydro5H-5-oxo-1,4-benzo-diuzepines is described. The method involves the addition of methyl anlhranilates to elhyl-enimine followed by intramolecular cyclizalion of the resulting intermediate compounds. Another attempted method starting from β-anilinoethylisocyanales is also described.