Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

Crystal Phases of TiO2 Ultrafine Particles Prepared by Laser Ablation of Solid Rods

Titanium dioxide ultrafine particles (UFPs) are produced by pulsed laser ablation of titanium or titanium dioxide (anatase and rutile) rods in an atmosphere of He or O₂/He mixture. The collected UFPs on cellulose membrane filters at the exit of the ablation chamber are analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The TiO₂ particles produced are composed of very small particles (diameter: 10–50nm) that are completely anatase, irrespective of the rod material, and relatively large particles (diameter: 100nm–1m) that are a mixture of anatase and rutile. The large particles consist of the direct strip-off fragments coming from the rod surface. The particles obtained from the laser ablation on TiO₂ rods in an atmosphere of He contains gray particles that are supposed to be amorphous TiO₂ (x < 2). In the presence of O₂ in the ablation chamber, these oxygen defects in amorphous TiO₂ are stabilized and anatase UFPs are formed. These results suggest that the crystal phase of the products can be controlled by adjusting the rod material and the gases used in the ablation process.     

Features and mechanism of H- anion emission from 12 CaO x 7 Al2O3 surface

The hydrogen anion (H-) and other anionic species (O-, OH-, e-) in the gas phase, emitted from the synthesized crystal surface of 12 CaO x 7 Al2O3-H- (C12A7-H-), have been observed. The emission intensity of all the anionic species strongly depends on the sample surface temperature and the extraction field. H- has the highest emission branch ratio, and the extraction field can reduce its apparent activation energy. H- emission current at a microA/cm2-level has been achieved, which is about 4 orders of magnitude higher than that obtained from the thermal desorption process of CaH2. The observed anions of H- and OH- are attributed to their migration from the C12A7-H- cages onto the surface [i.e., Y-(cages) --> Y-(surface) --> Y-(gas phase) (Y = H, OH)]. The weak O- and electron emission would both arise from the dissociation of O2-: O2-(surface) --> O-(surface) + e-(surface) --> O-(gas phase) + e-(space).     

Reduction features of NO over a potassium-doped C12A7-O- catalyst

The NO reduction features over a noble-metal-free NO(x) storage/reduction catalyst ([Ca24Al28O64](4+*)4O-/K, defined as C12A7-O-/K), including the NO conversion, the N2 selectivity, and sulfur tolerance, were investigated with hydrogen and C3H6 as the reducing agents in a fixed-bed continuous flow reactor. The NO conversion and the N2 selectivity on the C12A7-O-/K catalyst mainly depends on the sample temperature, the percentage of potassium, the reducing agents, and the composition of the mixture of gases. The C12A7-O-/10%K catalyst possessed the highest selective reduction ability (to N2) among the catalysts C12A7-O-/x%K. Over 50% of NO can be reduced to N2 with H2 as the reduction agent at 550-700 degrees C. The C12A7-O-/K catalyst also shows higher NO(x) storage capacity (183.9 micromol/g at about 550 degrees C) as well as sulfur tolerance for both the NO(x) storage and the reduction processes. The catalyst characteristics and the intermediate species formed in the NO storage and reduction processes were investigated by the X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and time-of-flight mass spectrometry. The mechanism of NO(x) reduction was addressed according to the above investigations.     

One-step synthesis of phenol by O- and OH- emission material

A novel approach to the direct synthesis of phenol from benzene was obtained with high benzene conversion (30%) and phenol selectivity (approximately 90%) by using a microporous material [Ca24Al28O64]4+.4O-(C12A7-O-) as catalyst with oxygen and water; active O- and OH- anions are proposed to play important roles in the formation of phenol by hydroxylating the aromatic ring of benzene.     

Alternative splicing variations in mouse CAPS2: differential expression and functional properties of splicing variants

Background  

Ca²⁺-dependent activator protein 2 (CAPS2/CADPS2) is a secretory vesicle-associated protein involved in the release of neurotrophin. We recently reported that an aberrant, alternatively spliced CAPS2 mRNA that lacks exon 3 (CAPS2Δexon3) is detected in some patients with autism. Splicing variations in mouse CAPS2 and their expression and functions remain unclear.     

Mechanistic features for hydroxyl anion emission from the modified 12CaO.7Al2O3 surface

OH(-), O(-), and H(-) emissions from the [Ca(24)Al(28)O(64)](4+).4(OH(-)) (defined as C12A7-OH(-)) surface were investigated by time-of-flight (TOF) spectrometry. The emission intensities were sensitive to surface temperature and extraction field. The apparent activation energies of anions decreased with the increase of applied extraction field. At an extraction field of 800 V/cm, the emission ratio of OH(-) to total anions is 0.98-0.65 in the temperature range of 870-1075 K. The OH(-) emission from C12A7-OH(-) was described by the following kinetic processes: the OH(-) anions in the cages migrated onto the sample surface by field enhanced thermal diffusion, and then desorbed to form the gas-phase anions of OH(-). The O(-) emission originated from the dissociation of O(2-) and OH(-). Similarly, H(-) emission was also attributed to the dissociation of OH(-) on the C12A7-OH(-) surface.     

Surface modification of polystyrene with atomic oxygen radical anions-dissolved solution

A novel approach to surface modification of polystyrene (PS) polymer with atomic oxygen radical anions-dissolved solution (named as O⁻ water) has been investigated. The O⁻ water, generated by bubbling of the O⁻ (atomic oxygen radical anion) flux into the deionized water, was characterized by UV-absorption spectroscopy and electron paramagnetic resonance (EPR) spectroscopy. The O⁻ water treatments caused an obvious increase of the surface hydrophilicity, surface energy, surface roughness and also caused an alteration of the surface chemical composition for PS surfaces, which were indicated by the variety of contact angle and material characterization by atomic force microscope (AFM) imaging, field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and attenuated total-reflection Fourier transform infrared (ATR-FTIR) measurements. Particularly, it was found that some hydrophilic groups such as hydroxyl (OH) and carbonyl (CO) groups were introduced onto the polystyrene surfaces via the O⁻ water treatment, leading to the increases of surface hydrophilicity and surface energy. The active oxygen species would react with the aromatic ring molecules on the PS surfaces and decompose the aromatic compounds to produce hydrophilic hydroxyl and carbonyl compounds. In addition, the O⁻ water is also considered as a “clean solution” without adding any toxic chemicals and it is easy to be handled at room temperature. Present method may suit to the surface modification of polymers and other heat-sensitive materials potentially.