On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

MgBr2·OEt2 mediated protection of alcohols with hexamethyldisilazane: An efficient catalytic route for the preparation of silyl ethers under solvent-free conditions

Various types of alcohols and phenols were rapidly protected by hexamethyldisilazane in good to excellent yields at room temperature in the presence of catalytic amount of magnesium bromide ethyl etherate under solvent-free conditions. Good to excellent chemoselectivity was demonstrated for competitive protection of primary hydroxyls in the presence of secondary and tertiary alcohols. Highly selective protection of phenols in the presence of aromatic amines was also demonstrated successfully.     

Modified determination of dihydrostreptomycin in kidney, muscle and milk by HPLC.

A method is presented for the determination of dihydrostreptomycin in milk, muscle and kidney by reversed-phase ion-pair high-performance liquid chromatography and post-column derivatisation with beta-naphthoquinone-4-sulfonate prior to fluorescence detection. The new sample work-up procedures include acid precipitation of proteins and, in the case of muscle and kidney, removal of fats by solvent extraction followed by solid phase extraction on a cation exchanger. The fluorescence response was linear from 25 to 2000 micrograms l-1 of injected analyte. The detection limits were 10 micrograms kg-1 for milk and 15 micrograms kg-1 for muscle and kidney and the analyte recoveries were on average 93% for milk, 70% for kidney and 75% for muscle.     

A heterogeneous model for gas transport in carbon molecular sieves

A dual resistance model with distribution of either barrier or pore diffusional activation energy is proposed in this work for gas transport in carbon molecular sieve (CMS) micropores. This is a novel approach in which the equilibrium is homogeneous, but the kinetics is heterogeneous. The model seems to provide a possible explanation for the concentration dependence of the thermodynamically corrected barrier and pore diffusion coefficients observed in previous studies from this laboratory on gas diffusion in CMS. The energy distribution is assumed to follow the gamma distribution function. It is shown that the energy distribution model can fully capture the behavior described by the empirical model established in earlier studies to account for the concentration dependence of thermodynamically corrected barrier and pore diffusion coefficients. A methodology is proposed for extracting energy distribution parameters, and it is further shown that the extracted energy distribution parameters can effectively predict integral uptake and column breakthrough profiles over a wide range of operating pressures.     

Synthesis and structure of fluorotricyanomethane

Fluorotricyanomethane is prepared from potassium tricyanomethanide and perchlorylfluoride. The crystal structure of this compound (orthorhombic, space group P2₁2₁2₁, with a=6.270, b=6.734, c=11.776 Å) has been determined by X-ray analysis. The results are discussed in relation to those of (NC)₃C? X (X=? CH₃, ? Cl, ? Br or ? CN).     

Efficient low-temperature oxidation of carbon-cluster anions by SO2

Carbon-cluster anions, CN-, are very reactive toward SO2 (sticking probability of 0.012 +/- 0.005 for C27- at 25 degrees C), in contrast to their inertness toward other common atmospheric gases and pollutants. In flow reactor experiments at ambient temperature and near atmospheric pressure, primary adsorption of SO2 by the carbon cluster anions, N = 4-60, yields CNSO2- or CN-1S-. The inferred elimination of neutral CO2 is also detected as meta-stable decay in collision-induced dissociation. At higher temperatures, the reaction of SO2 with nascent carbon clusters yields CN-1SO- as well as undetected CO. The size-dependent initial reactivity reflects the previously established structural transitions (i.e., from chain to cyclic to cage structures). Such carbon clusters are formed in sooting flames and may act as nuclei for the formation of primary soot particles and serve as models for the local structural features of active soot particle sites for black-carbon soot. The facile generation of reactive carbon-sulfide and -sulfinate units may therefore have implications for understanding the health and environmental effects attributed to the coincidence of soot and SO2.     

Three new cholinesterase-inhibiting cis-clerodane diterpenoids from Otostegia limbata

Three new tricyclic cis-clerodane type diterpenoids trivially named as limbatolide A (1), limbatolide B (2) and limbatolide C (3) have been isolated from the roots of Otostegia limbata along with two known compounds; oleanic acid and beta-sitosterol. The structure elucidation of the new compounds was based primarily on two-dimensional (2D) NMR techniques. Compounds 1-3 displayed inhibitory potential in a concentration-dependent manner against acetylcholinesterase (AChE; EC 3.1.1.7) and butyrylcholinesterase (BChE; EC 3.1.1.8) enzymes, respectively.     

Structure determination of bioactive galloyl derivatives by NMR spectroscopy

The investigation of the chemical constituents of Symplocos racemosa Roxb led to the isolation of two new glycosides, symcomoside A (1) and symcomoside B (2), together with one known glycoside, tortoside C (3), which is reported for the first time from this plant. The structures of the new compounds were determined by 1D and 2D homonuclear and heteronuclear NMR spectroscopy, from chemical evidence and by comparison with published data for closely related compounds. Symcomoside B (2) showed potent inhibitory activity against alpha-glucosidase in a concentration-dependent fashion with an IC50 value of 0.733 +/- 0.033 mM whereas symcomoside A (1) showed very weak inhibitory activity against alpha-glucosidase (9.90% in 0.70 mM).     

Base induced cyclization of some quinolines. Formation of fused nitrogen heterocyclic ring system

Condensation of 3,5-dinitro-4-chloro-6-methoxy-2-methylquinoline (1) with benzylamine, ethanolamine and/or thioglycolic acid afforded the quinoline derivatives4 a-c. Cyclization of4 a and4 b with alkali and condensation of1 with glycine in sodium carbonate solution furnish 2H-imidazo[4,5-c]quinoline derivatives5 a-c, respectively. Treatment of5 b with benzaldehyde in presence of zinc chloride gave the styryl derivative6. 1 reacted with sodium azide to give the azido derivative4 d, which upon treatment with phenylhydrazine or sodium borohydride yielded the 4-amino derivative4 3. Moreover,1 was treated with phenylhydrazine to give4 f, which cyclized in 10% sodium hydroxide solution to the corresponding v-triazolo[4,5-c]quinoline 3-oxide derivative7. When however4 f was treated with dilute hydrochloric acid, the corresponding phenylpyrazolo[3,4,5-de]quinoline derivative8 was obtained.

---

Baseninduzierte Cyclisierung einiger Chinoline. Darstellung höherer Stickstoff-Heterocyclen

Zusammenfassung Kondensation von 3,5-Dinitro-4-chlor-6-methoxy-2-methylchinolin (1) mit Benzylamin, Ethanolamin und/oder Thioglycolsäure ergab die Chinolinderivate4 a-c. Cyclisierung von4 a und4 b mit Alkali und Kondensation von1 mit Glycin in Natriumcarbonatlösung lieferte 2H-imidazo[4,5-c]chinolin-Derivate5 a-c. Behandlung von5 b mit Benzaldehyd in Gegenwart von Zinkchlorid ergab das Styrylderivat6. 1 wurde mit Natriumazid zum Azidoderivat4 d umgesetzt, das mit Phenylhydrazin oder Natriumborhydrid zum 4-Aminoderivat4 e weiterreagierte.1 ergab mit Phenylhydrazin4 f, das in 10% NaOH-Lösung zum entsprechenden Triazolo[4,5-c]chinolin-Derivat7 cyclisierte. Aus4 f wurde mit verdünnter Salzsäure das Phenylpyrazolo[3,4,5-de]chinolin8 erhalten.

     

Simultaneous Spectrophotometric Determination of Group B Vitamins Using Parallel Factor Analysis: PARAFAC

In this work, a simple and rapid analytical procedure was applied for simultaneous determination of folic acid (vitamin B₀), thiamin (vitamin B₁), riboflavin (vitamin B₂) and pyridoxal (vitamin B₆) based on the absorbance data in the pH range 2.0‐12.0 at 25 °C using parallel factor analysis (PARAFAC). The effect of the pH as the most important factor on the sensitivity of the determination was studied. The spectral data were recorded in 400‐650 nm intervals and a 2‐12 pH range for all four vitamins. The calibration set was constructed in the concentration ranges of 4‐22, 1‐20, 6‐26, and 4‐20 μg mL^?;1 for B₆,B₂,B₁ and B₀, respectively. The root mean squares errors of prediction for the prediction set, (RMSEP), are 0.65, 0.63, 1.13 and 0.34 for B₀,B₁,B₂ and B₆, respectively. The recovery percent for the validation set are in the range of 90.6 to 107.0%. The effect of the experimental conditions and diverse species were discussed. The optimum values of these factors were searched according to the relative standard deviation of the prediction set of mixtures solutions.