High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

An automated laboratory EXAFS spectrometer of Johansson type: indigenous development and testing

An automated linear laboratory EXAFS spectrometer of the Johansson type has been indigenously developed. Only two translational motions are required to achieve the necessary Rowland circle configuration for the (fixed) X-ray source, the dispersing and focusing bent crystal and the receiving slit. With the available crystals the spectral region from 5 to 25 keV can be scanned. The linear motions of the crystal and receiving slit including the detector assembly are achieved by employing software-controlled DC motors and utilizing optical encoders for position sensing. The appropriate rotation of the crystal is achieved by the geometry of the instrument. There is a facility to place the sample alternately in the path of the X-ray beam and out of the path to record both the incident X-ray intensityI ₀ and the transmitted intensityI employing the scintillation detector. An arrangement with a two-window proportional detector before the sample to measureI ₀ and the scintillation detector to recordI is also developed; in this case it is not necessary to oscillate the sample. Fast electronic circuits are employed to minimize counting errors. The instrument is user-friendly and it is operated through a menu-driven IBM compatible PC. EXAFS spectra of high resolution have been recorded using the spectrometer and employing the Si(111) reflecting planes; the X-ray source being a Rigaku 12 kW rotating anode with Cu target. We describe the spectrometer and discuss its performance with a few representative spectra.     

Reaction kinetics of the selective liquid phase hydrogenation of styrene oxide to β-phenethyl alcohol

Liquid phase hydrogenation of styrene oxide using 1% Pd/C and NaOH as a promoter was found to give selectively β-phenethyl alcohol (PEA) under very mild conditions (313–333 K; 0.68–5.5 MPa). The kinetics of this system was investigated by collecting initial rate data in a batch slurry reactor. Rate of hydrogenation was found to decrease beyond a certain concentration of both hydrogen (>3 MPa) and styrene oxide (>0.5 kmol/m³). A Langmuir–Hinshelwood type rate equation has been proposed based on the initial rate data in the kinetic regime. The model predictions agree very well with the experimentally observed concentration–time data indicating the applicability of the proposed rate model.     

Dielectric Studies of Glycine–Ethylene Glycol–Water Solutions Using Time Domain Reflectometry

Time domain reflectometry (TDR) has been used for dielectric relaxation measurements on the glycine–ethylene glycol–water ternary system (TDR) at 25, 30, 35, and 40°C in the frequency range from 10 MHz to 10 GHz. Glycine–ethylene glycol–water solutions are prepared with different concentrations of ethylene glycol (0, 5, 10, 15, 20, and 30%) and also for different glycine molar concentrations (0, 0.2, 0.4, 0.6, 0.8, and 1 M). The dielectric relaxation parameters are measured for aqueous glycine solutions also to compare the results with those for the glycine–ethylene glycol–water ternary system. For all the solutions considered, only one relaxation peak was observed in this frequency range. The complex permittivity spectra for the aqueous glycine solutions can be well described by the Cole–Davidson expression, whereas that for the ternary system can be well described by the Havriliak–Negami expression. The logarithm of the relaxation time log() shows a nonlinear relation with the glycine molar concentration that implies a change in the relaxation mechanism with glycine concentration. The dielectric strength increases with an increase in glycine molar concentration, whereas it decreases with an increase in ethylene glycol concentration.     

Siderophore production by a marine Pseudomonas aeruginosa and its antagonistic action against phytopathogenic fungi

A marine isolate of fluorescent Pseudomonas sp. having the ability to produce the pyoverdine type of siderophores under low iron stress (up to 10 μM iron in the succinate medium) was identified as Pseudomonas aeruginosa by using BIOLOG Breathprint and siderotyping. Pyoverdine production was optimum at 0.2% (w/v) succinate, pH 6.0, in an iron-deficient medium. Studies carried out in vitro revealed that purified siderophores and Pseudomonas culture have good antifungal activity against the plant deleterious fungi, namely, Aspergillus niger, Aspergillus flavus, Aspergillus oryzae, Fusarium oxysporum, and Sclerotium rolfsii. Siderophore-based maximum inhibition was observed against A. niger. These in vitro antagonistic actions of marine Pseudomonas against phytopathogens suggest the potential of the organism to serve as a biocontrol agent.     

Theoretical study of 3d‐metal mononitrides using DFT method

3d‐Metal mononitrides are studied using the density functional theory method. The lowest spin state for these dimers is obtained using the B3LYP hybrid functional with the 6‐311+G* basis set. The equilibrium geometries, vibrational frequencies, binding energies, Mulliken, and natural orbital population analysis charges, natural orbital electronic configuration, electron affinity, and ionization potential are obtained. Mulliken as well as natural orbital population analysis charges indicate that for all dimers, in cations most of the positive charge localized on the transition metal atom where in anions most of the negative charge localized on nitrogen atom. The binding energies for 3d‐metal mononitrides are higher than those for monocarbides and monoxides. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Temperature Dependent Dielectric Relaxation in Solvent Mixtures at Microwave Frequencies

By the use of time domain reflectometry method, dielectric measurements were carried out on dimethylformamide‐2‐nitrotoluene solvent mixtures in the frequency range 10 MHz‐20 GHz, at various temperatures from 15 °C to 45 °C. These solvent mixtures as well as pure solvents display a Debye type dispersion. Their frequency dependent dielectric properties can be summarized by the three parameters in the Debye equation: a static permittivity, permittivity at high frequency and a dielectric relaxation time constant. The free energy of activation for dipolar relaxation process and the Kirkwood correlation factor were determined using these fitting parameters for these solvent mixtures at various concentrations and temperatures. By using these dielectric parameters, the excess permittivity and excess inverse relaxation time is obtained. The excess permittivity is found to be positive for all concentrations and temperatures whereas the excess inverse relaxation time is negative.