High-throughput characterization of local conductivity of Nd0.9Ca0.1Ba2Cu3O7−δ thin film by the low-temperature scanning microwave microscope

We developed a scanning microwave microscope (SμM) designed for high-throughput electric-property screening as well as for rapid construction of electronic phase diagrams at low temperatures. As a sensor probe, we used a high-Qλ/4 coaxial cavity resonator to which a thin needle with ball-tip end was attached. The sensor module was mounted on the low-temperature XYZ stage, which allowed us to map out the change of resonance frequency and quality factor due to the local tip-sample interaction at low temperatures. From the measurements of combinatorial thin films, such as Ti_1−xCo_xO_2−δ and Nd_0.9Ca_0.1Ba₂Cu₃O_7−δ (NCBCO), it was demonstrated that this SμM system has enough performance for the high-throughput characterization of sample conductance under variable temperature conditions.     

Investigation of the drying conditions for amidosulfuric acid.

The drying conditions for primary standards of volumetric analysis have a significant effect on the titration results due to changes in the purity, stability and homogeneity. Amidosulfuric acid, a strong acid used as a reference material for volumetric analysis in Japan, was dried in a vacuum desiccator or heated at different temperatures, and then measured by Karl-Fischer titration, thermogravimetry/mass spectroscopy (TG-MS), ion chromatography and coulometric titration. The optimum drying conditions were at 50 degrees C for 24 h with crushing.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Excited states of porphyrin isomers and porphycene derivatives: a SAC-CI study

Excited states of free-base porphyrin isomers, porphycene (Pc), corrphycene (Cor), and hemiporphycene (hPc), were studied by the Symmetry-Adapted Cluster (SAC)/SAC-Configuration Interaction (CI) method. The absorption peaks of the porphyrin isomers were assigned on the basis of the SAC-CI spectra. The X, Y, X', and Y' bands of the porphyrin isomers, which have weak intensities, are identified. The differences in the Q-band absorptions among the isomers were clearly explained by the four-orbital model. In Cor and hPc, the wave function of the B-band corresponds to the mixture of the four-orbital excitations and the optically forbidden excitation of free-base porphin (P), due to the molecular symmetry lowering in the isomers. The B-band character is described by the five-orbital model in Pc and the six-orbital model in Cor and hPc. Two tetrazaporphycenes and two ring-extended (dibenzo) porphycenes were designed, and the Q-band transition moment was successfully controlled. These examples show that the control of the four-orbital energy levels is the guiding principle for pigment design in porphyrin compounds.     

Spirostane derivatives highly oxygenated at A and B rings from the rhizomes of rohdeajaponica roth and of campylandra aurantiaca baker

Two steroidal compounds BR-1 (I) and ?2 (II) which had been obtained from the rhizomes of $\text{Campylandra aurantiaca}$ Baker, were isolated also from those of $\text{Rohdea japonica}$ Roth. They were identified, respectively, by X-ray analysis and chemical correlation as 1β,2β,3β,4β,5β,7α-hydroxy-spirost-25(27)-en-6-one and its corresponding 6β-hydroxy compound.     

Dynamics of order formation by colloidal adsorption onto a substrate studied with Brownian dynamics

Colloidal adsorption and spontaneous ordering of adsorbed particles on a substrate was simulated using a three-dimensional simulation model for colloidal dispersion system with an adsorptive surface under a specified bulk concentration, where the particle-particle and particle-substrate interactions were modeled on the DLVO theory. The key process for order formation is considered to be the adsorption of a particle that induces the transition from incomplete order to perfect order, and is found to involve a stochastic nature due to an energy barrier which must be overcome for the system to reach ordered state. Also, a model was developed to predict the energy barrier for order formation based on direct observation of the key process. Further, a model to describe the stochastic nature of the process was developed and its quantitative validity was demonstrated. Through the examination of the key process, it is concluded that the mechanism of the order formation is composed of two successive processes and the rate-determining step varies depending on the ionic strength.     

Synthesis,crystal structure and charge transport characteristics of stable peri-tetracene analogues

peri-Acenes have shown great potential for use as functional materials because of their open-shell singlet biradical character. However, only a limited number of peri-acene derivatives larger than peri-tetracene have been synthesized to date, presumably owing to the low stability of the target compounds in addition to the complicated synthesis scheme. Here, a very simple synthesis route for the tetrabenzo[a,f,j,o]perylene (TBP) structure enables the development of highly stable peri-tetracene analogues. Despite a high degree of singlet biradical character, the compounds with four substituents at the zigzag edge show a remarkable stability in solution under ambient conditions, which is better than that of acene derivatives with a closed-shell electronic configuration. The crystal structures of the TBP derivatives were obtained for the first time; these are valuable to understand the relationship between the structure and biradical character of peri-acenes. The application of peri-acenes in electronic devices should also be investigated. Therefore, the semiconducting properties of the TBP derivative were investigated by fabricating the field-effect transistors.

Highly stable peri-tetracene analogues with a high degree of singlet biradical character were synthesized in a very simple route, and their crystal structures and semiconducting properties were investigated.     

Total Synthesis of Natural PI-091, a New Platelet Aggregation Inhibitor of Microbial Origin

The total synthesis of a new platelet aggregation-inhibiting gamma-lactam PI-091 (1) gave a 1:1 diastereomeric mixture at the gamma-ketal carbon. The high-yielding aldol reaction of an appropriately protected 1,3,4-trihydroxy-4-methyldecan-2-one 42, prepared from D-glucose, with the kinetically generated enolate of 3-methyl-2-butanone provided 43. The resulting diastereomeric mixture of the aldol adduct 43 was converted to a 2,4-alkylated furan 45 via an intramolecular ketalization followed by dehydration. The addition of a singlet oxygen to the alpha-trimethylsilylated furan 48derived from 45 under photochemical conditions efficiently provided an alpha,gamma-dialkylated gamma-hydroxy gamma-lactone 47. The transformation of methyl ketal 52 prepared from 47 into gamma-hydroxy gamma-lactam 53 was achieved by exposure to liquid ammonia in MeOH. The total synthesis of 1 was achieved from 52 through the Dess-Martin periodinane oxidation of the secondary hydroxy group in the side chain. The present total synthesis revealed that the stereogenic carbon center in the side chain in natural 1 is S.