Biotic Cathode of Graphite Fibre Brush for Improved Application in Microbial Fuel Cells

The biocathode in a microbial fuel cell (MFC) system is a promising and a cheap alternative method to improve cathode reaction performance. This study aims to identify the effect of the electrode combination between non-chemical modified stainless steel (SS) and graphite fibre brush (GFB) for constructing bio-electrodes in an MFC. In this study, the MFC had two chambers, separated by a cation exchange membrane, and underwent a total of four different treatments with different electrode arrangements (anodeǁcathode)—SSǁSS (control), GFBǁSS, GFBǁGFB and SSǁGFB. Both electrodes were heat-treated to improve surface oxidation. On the 20th day of the operation, the GFBǁGFB arrangement generated the highest power density, up to 3.03 W/m³ (177 A/m³), followed by the SSǁGFB (0.0106 W/m³, 0.412 A/m³), the GFBǁSS (0.0283 W/m³, 17.1 A/m³), and the SSǁSS arrangements (0.0069 W/m⁻³, 1.64 A/m³). The GFBǁGFB had the lowest internal resistance (0.2 kΩ), corresponding to the highest power output. The other electrode arrangements, SSǁGFB, GFBǁSS, and SSǁSS, showed very high internal resistance (82 kΩ, 2.1 kΩ and 18 kΩ, respectively) due to the low proton and electron movement activity in the MFC systems. The results show that GFB materials can be used as anode and cathode in a fully biotic MFC system.     

Fluctuation-dissipation relations for polymer systems. I. The molecular weight dependence of the viscosity

Generalised Langevin equations are used to describe the motion of interacting polymer molecules. In these equations the many-body aspects of the problem are incorporated into generalised friction functions and random forces. The so-called second fluctuation-dissipation relation gives a general relation between these two quantities and enables us to relate the spatial correlations present in the environment to a normal mode dependent friction coefficient and force constant. We then show how the various regimes of molecular weight dependence of the viscosity can be understood in a fairly general and non-specific way in terms of the spatial correlations of the random forces representing the rest of the system of polymer and solvent molecules. In particular a molecular weight dependence of M³ is shown to be a general feature of a spatially corelated environment.     

Precision and control in polymer synthesis why it's important and some recent examples of how to do it

This paper discusses some of the reasons why precision and control in polymer synthesis is of importance. By way of illustration it describes in outline recent results from the authors' laboratories in three areas. Namely; the controlled syntheses of poly(arylene vinylene)s and the influence of cis/trans vinylene content on luminescence in such polymers; the living polymerisation of highly functionalised polymers in water and the regulation of the crystallisation of calcium carbonate from water by the resultant well-defined water soluble polymers; and a simple route to hyperbranched polymers and the influence of the structure and topology of the products on solution properties. In each case the influence of control of architecture on properties will be discussed.     

Feedforward Neural Network Trained by BFGS Algorithm for Modeling Plasma Etching of Silicon Carbide

Electron cyclotron resonance (ECR) plasma etching of silicon carbide is numerically modeled by a feedforward neural network (FNN), which is trained by the Broyden, Fletcher, Goldfarb, and Shanno (BFGS) optimization algorithm and the conventional backpropagation (BP) algorithm. The training samples are obtained from our experimental results, which meet the requirement of Box–Wilson central-composite-designed experimental test design. By using the samples, the BFGS algorithm is compared with the conventional BP algorithm with different hidden neuron numbers, different number of iterations and various learning rates. It is shown that the BFGS algorithm requires less hidden neurons and less iteration to obtain the same training results, and it also provides much smaller cross-validation errors. Therefore, the FNN trained by the BFGS algorithm possesses much better approximation and generalization ability. The silicon carbide ECR process modeling results demonstrate that the FNN trained by the BFGS algorithm are fast, reliable, and accurate.      

Allylic monomers as reactive plasticizers of polyphenylene oxide. Part III – Rheological and mechanical properties

The chemorheology of blends of diallyl ortho-phthalate (DAOP) as reactive plasticizer of polyphenylene oxide (PPO) were monitored during their cure with either dicumyl peroxide (DCP) or tert-butyl hydroperoxide (TBHP), and their mechanical properties and morphology were studied. The steady shear and dynamic rheology behaviour was consistent with chemical gelation of DAOP in blends with low concentrations of PPO but the gelation behaviour at higher PPO concentrations was more complex. Dynamic mechanical thermal analysis of the blends of PPO:DAOP cured with either DCP or TBHP indicated a two phase structure. For PPO:DAOP/DCP, the lowest transition (between 150 °C and 200 °C) was attributed to a DAOP-rich phase and its T_g was higher than that for pure DAOP/DCP due to the presence of PPO in the DAOP-rich phase. The smaller damping shoulder near 250 °C was caused by a PPO-rich phase with a T_g that was lower than pristine PPO due to the presence of unpolymerized or polymerized DAOP. In contrast, the glass transition region of the PPO:DAOP/TBHP system was very broad due to an overlap of the transitions for DAOP-rich and PPO-rich phases caused by higher levels of unpolymerized DAOP. SEM observations of the blends revealed a two phase morphology with PPO-rich particles in a poly-DAOP matrix for blends with ?30 wt% PPO, a co-continuous morphology for blends with 40 wt% PPO, and a phase inverted morphology with more than 50 wt% PPO. These SEM observations agree with studies of the swelling, disintegration or dissolution of matrix of the blends in solvent.     

Allylic monomers as reactive plasticizers of polyphenylene oxide. Part II: Cure kinetics

As part of an investigation of the processing of polyphenylene oxide (PPO) with polymerisable plasticizers, the curing kinetics of various diallylic monomers – diallyl ortho phthalate (DAOP), diallyl terephthalate, triethylene glycol diallyl ether and diethylene glycol diallyl carbonate) – and triallylic – triallyl cyanurate and triallyl isocyanurate – with radical initiators of differing activity were studied. All the monomers exhibited similar cure kinetics with each initiator and the exotherm peak temperatures correlated well with the reactivity of the initiators as measured by the 1 h half-life temperatures. Multiple scan-rate dynamic DSC studies gave similar activation energies to those obtained from isothermal rheology studies of gelation. The effects of the presence of PPO on the curing of diallyl ortho phthalate (DAOP) were studied using dicumyl peroxide (DCP) and tert-butyl hydroperoxide (TBHP) as initiators and differing behaviour was observed. In the PPO:DAOP/DCP system, the reaction rate was reduced with increasing PPO due to a dilution effect but the heat of reaction was generally unaffected. However, in the PPO:DAOP/TBHP system, a significant increase of cure rate was observed in the presence of 20 wt.% PPO due to the catalysis of TBHP by Cu²⁺ and Co³⁺ impurities in the PPO, but the cure rate was slightly reduced with increasing PPO content. In addition, the heat of polymerisation for the PPO:DAOP/TBHP blends were usually less than that for the pure monomer. This information can be used in the processing of PPO with DAOP as a polymerisable plasticizer.     

Thermal and mechanical properties of gamma-irradiated prevulcanized natural rubber latex/low nitrosamines latex blends

Thermal and mechanical properties of blended radiation prevulcanized natural rubber latex (RVNRL) and low nitrosamines latex (LNL) were studied. RVNRL was blended with LNL at various composition ratios. From the tensile test, it was found that the optimum tensile value was attained at a total blending ratio of 70% RVNRL and 30% LNL. Latex blending with optimum tensile strength was then subjected to gamma irradiation at various doses with the presence and absence of methyl methacrylate (MMA) at 10?pphr. It was found that the gamma irradiation of latex blend with the presence of MMA could help increase further the tensile value. Composition of blending at a specific ratio and gamma irradiation at a specific dose has led to a significant improvement in the mechanical properties of the latex blend. The formation of grafting in the latex blend was characterized by Fourier transform infrared spectra (FTIR) spectroscopy and differential scanning calorimetry (DSC). FTIR spectroscopy confirmed that MMA could be grafted onto blended latex effectively under appropriate irradiation conditions. Two new peaks at 1731 and 1149?cm^?1 were observed after irradiation, indicating the presence of an ester group from poly(methyl methacrylate) (PMMA), which was grafted onto rubber chains. This finding was proved by the presence of new T_g in DSC analysis. The increase in new T_g indicates the movement of grafting chains, which are tightly bound onto rubber chains.     

Process Evaluation of Enzymatic Hydrolysis with Filtrate Recycle for the Production of High Concentration Sugars

Process simulation and lab trials were carried out to demonstrate and confirm the efficiency of the concept that recycling hydrolysate at low total solid enzymatic hydrolysis is one of the options to increase the sugar concentration without mixing problems. Higher sugar concentration can reduce the capital cost for fermentation and distillation because of smaller retention volume. Meanwhile, operation cost will also decrease for less operating volume and less energy required for distillation. With the computer simulation, time and efforts can be saved to achieve the steady state of recycling process, which is the scenario for industrial production. This paper, to the best of our knowledge, is the first paper discussing steady-state saccharification with recycling of the filtrate form enzymatic hydrolysis to increase sugar concentration. Recycled enzymes in the filtrate (15–30% of the original enzyme loading) resulted in 5–10% higher carbohydrate conversion compared to the case in which recycled enzymes were denatured. The recycled hydrolysate yielded 10% higher carbohydrate conversion compared to pure sugar simulated hydrolysate at the same enzyme loading, which indicated hydrolysis by-products could boost enzymatic hydrolysis. The high sugar concentration (pure sugar simulated) showed inhibition effect, since about 15% decrease in carbohydrate conversion was observed compared with the case with no sugar added. The overall effect of hydrolysate recycling at WinGEMS simulated steady-state conditions with 5% total solids was increasing the sugar concentration from 35 to 141 g/l, while the carbohydrate conversion was 2% higher for recycling at steady state (87%) compared with no recycling strategy (85%). Ten percent and 15% total solid processes were also evaluated in this study.     

Optimization of an efficient semi-solid culture protocol for sterilization and plant regeneration of Centella asiatica (L.) as a medicinal herb

The present study investigates the effects of different concentrations, as well as type of plant growth regulators (PGRs) and medium (MS, Duchefa) on the growth and development of Centella asiatica in semi-solid culture. In addition, a protocol for successful sterilization of C.asiatica explants prepared from field-grown plants highly exposed to fungal and bacterial contamination was determined. Results for sterilization treatments revealed that applying HgCl? and Plant Preservative Mixture (PPM) with cetrimide, bavistin and trimethoprim which were included after washing with tap water, followed by the addition of PPM in the medium, produced a very satisfactory result (clean culture 90 ± 1.33%) and TS5 (decon + cetrimide 1% + bavistin 150 mg/L + trimethoprim 50 mg/L + HgCl?0.1% + PPM 2% soak and 2 mL/L in medium) was hence chosen as the best method of sterilization for C.asiatica. The synergistic combination of 6 benzylaminopurine (BAP) and 1-naphthaleneacetic acid (NAA) in concentrations of 2 mg/L and 0.1 mg/L, respectively, in Duchefa medium compared with MS induced the most optimal percentage of sprouted shoots (93 ± 0.667), number of shoots (5.2 ± 0.079) and nodes (4 ± 0.067) per explant, leaf per explant (14 ± 0.107) and shoot length (4.1 ± 0.67 cm). Furthermore, optimum rooting frequency (95.2 ± 0.81%), the number of roots/shoot (7.5 ± 0.107) and the mean root length (4.5 ± 0.133 cm) occurred for shoots that were cultured on full-strength MS medium containing 0.5 mg/L indole-3-butyric acid (IBA). In this study, the acclimatized plantlets were successfully established with almost 85% survival. The findings of this study have proven an efficient medium and PGR concentration for the mass propagation of C.asiatica. These findings would be useful in micropropagation and ex situ conservation of this plant.     

Allylic monomers as reactive plasticizers of polyphenylene oxide. Part I: Uncured systems

The effect of various diallyl (diallyl ortho phthalate, diallyl terephthalate and diethylene glycol diallyl carbonate) and triallyl monomers (triallyl cyanurate and triallyl isocyanurate) on the processability of polyphenylene oxide (PPO) was studied. The solubility parameters of the monomers indicated that diallyl orthophalate, dially terephthalate and triallyl cyanurate should be miscible with PPO suggesting their applicability as reactive plasticizers to improve the processability of PPO. Rheological studies of 60:40 wt:wt PPO:allylic blends indicate that the addition of 40 wt% of allylic monomers significantly improved processability – blends of 60PPO:40DEGDAC indicates the highest viscosity and the highest T_g. Rheological studies and dynamic mechanical analysis on various PPO/DAOP blends show that the increasing amounts of DAOP progressively decreases the viscosity and T_g of the blends. Phase separation at room temperature was observed by visual opacity, cloud point studies and DMTA in PPO:DAOP blends with less than 60 wt% PPO but at elevated temperatures the blends were miscible.