Collapse of square and rectangular tubes in transverse loading

Summary Analysis of the in plane lateral collapse of square and rectangular cross-section tubes is presented by considering the out-of-straightness of horizontal and vertical arms, corner radius, friction between the platens and the deforming specimen and instability of vertical arms. Results of collapse load for tubes of aluminium and mild steel, thus computed, are presented for some typical tube geometrics, and influence thereon of various parameters considered is discussed. Experiments were conducted wherein tubes of square and rectangular cross-sections of both the materials were laterally compressed between two parallel platens in an Instron machine. The observed collapse loads compare very well with the corresponding computed values.

---

Kollaps von vertikal belasteten Rohren mit quadratischem und rechteckigem Querschmitt

Übersicht Der Kollaps von Rohren mit quadratischem und rechteckigem Querschnitt, welche senkrecht zur Achse belastet werden, wird untersucht, wobei schiefe Vertikal- und Horizontalstege, gerundete Profilecken, Reibung zwischen Belastungsplatten und Rohr sowie die Stabilität der Vertikalstege brücksichtigt werden. Die Kollapslast wird für Aluminium und Weichstahl und einige typische Rohrgeometrien ermittelt und der Einfluß verschiedener Parameter wird untersucht. Die Experimente wurden auf einer Instron-Maschine durchgeführt, wobei Rohre mit quadratischem und rechteckigem Querschnitt aus beiden Werkstoffen zwischen zwei parallelen Platten quer zur Achse komprimiert wurden. Es konnte eine gute Übereinstimmung zwischen den Resultaten aus Experiment und Rechnung festgestellt werden.

     

(1-Adamantanethio)pyridines and tetrahydropyridines from the reaction of 1-adamantanethiol with pyridine I-oxide in acetic anhydride

The reaction of pyridine 1-oxide with 1-adamantanethiol in acetic anhydride produced a mixture of 2- and 3-(1-adamantanethio)pyridines, 1-aeetyl-2-(1-adamantanethio)-3-hydroxy-4-acetoxy-1,2,3,4-telrahydropyridine and the corresponding 3-acetoxyderivative. Pure substances were separated by means of column chromatography on alumina. The tetrahydropyridines were identified by means of their proton magnetic and mass spectra. 4-(1-Adamantanethio)pyridine was synthesized from 4-chloropyridinc and 1-adamantanethiol. The three isomeric (1-adamantanethio)-pyridines were, each, cleaved by concentrated hydrochloric acid to give 1-chloroadamantane and the corresponding pyridinethiol.     

Naphtho[1′,2′:5,6]pyrano[2,3–6][1,5]benzodiazepine Derivatives

The reaction of 3-(dimethylamino)-1-oxo-1H-naphtho[2,1-b]pyran-2-carbaldehyde (Ia) with o-phenylenediamines or N-monosubstituted o-phenylenediamines in refluxing glacial acetic acid afforded the corresponding naphtho[1′,2′:5,6]pyrano[2,3-b][1,5]benzodiazepin-15-(8H)ones V in very good yields. A similar result was achieved when the reaction was carried out in refluxing pyridine, using N-monosubstituted o-phenylenediamine hydrochlorides. The isolation of a significant intermediate as well as the synthesis through a different univocal pathway confirmed the structure of the compounds V. Moreover the reaction of Ia with N-monosubstituted o-phenylenediamines in refluxing pyridine generally afforded only low yields of compounds V, sometimes together with naphtho[1′,2′:5,6]pyrano[2,3-b][1,5]benzodiazepin-15-(13H)ones VII, isomers of V.     

Reactions of Polycyclic Ketones with Dimethoxycarbene; a Convenient Route for a ‘One‐Pot’ Preparation of Some α‐Hydroxycarboxylic Acid Esters

Polycyclic ‘cage’ ketones, such as pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan‐8‐one ( 10 ), pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane‐8,11‐dione ( 11 ), and adamantan‐2‐one ( 16 ) were treated with the nucleophilic dimethoxycarbene (DMC; 1 ), which was generated thermally from 2,5‐dihydro‐2,2‐dimethoxy‐5,5‐dimethyl‐1,3,4‐oxadiazole ( 4a ) in boiling toluene. In this ‘one‐pot’ procedure, the α‐hydroxycarboxylic acid ester 12 or a corresponding derivative 15 or 17 was obtained (Schemes 4–7). Additionally, ‘cage’ thione 21 was treated with DMC under the same conditions yielding dimethoxythiirane 22 (Scheme 8). Subsequent hydrolysis or desulfurization (followed by hydrolysis on silica gel) of 22 gave α‐mercaptocarboxylate 25 and the corresponding desulfurized ester 24 , respectively. In all cases, the addition of DMC occurred stereoselectively, and the addition from the exo‐face is postulated to explain the structures of the isolated products.     

12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidine derivatives

Reaction of 1-oxo-2-formyl-3-dimethylamino-1H-naphtho[2,1-b]pyran with amidines, guanidine, O-methylisourea, S-methylisothiourea afforded 9-substituted 12-oxo-12H-naphtho[1′,2′:5,6]pyrano[2,3-d]pyrimidines. When the reaction with O-methylisourea was carried out in anhydrous pyridine, 10,20-dioxo-10H,20H-dinaphtho[1,2-e:1′,2′-e′][1,5]diazocino[2,3-b:6,7-b′]dipyran was formed.     

1,2-fused pyrimidines. V. Synthesis of 1-alkyl or phenyl-2H-dipyrido-[1,2-a:2′,3′-d]pyrimidine-2,5(1H)-diones

The reaction of 2-[(N-acyl, N-alkyl or phenyl)amino]-4H-pyrido[1,2-a]pyrimidin-4-ones 8a-g with the N,N-dimethylformamide/phosphorus oxychloride Vilsmeier reagent 1 (95°, 90 minutes) afforded 1-alkyl or phenyl-2H-dipyrido[1,2-a:2′,3′-d]pyrimidine-2,5(1H)^?diones, 3-alkyl substituted or not, 10a-g . The starting compounds 8 were prepared by treating 2-amino-4H-pyrido[1,2-a]pyrimidin-4-ones N-alkyl substituted 7a,b or N-phenyl substituted 4 with excess anhydrides (130°, 7 hours) when the 2-(alkylamino) derivatives 7 were used in the reaction, compounds 8 were obtained along with very small amounts of 3-acyl-2-(alkylamino)-4H-pyrido[1,2-a]pyrimidin-4-ones 9 .     

Polonium 210Po activities in human blood of patients with ischaemic heart disease from Gdańsk in Poland

The determination of polonium ²¹⁰Po in human blood samples is presented and discussed in this paper. The human blood samples were collected from patients of Medical University of Gdańsk with ischaemic heart disease (morbus ischaemicus cordis, MIC). The polonium concentrations in analyzed human blood samples are very differentiated. ²¹⁰Po is of particular interest in public health and although is present in the environment in extremely low amounts, it is easily bioaccumulated to the human body. The study shows that the amount of ²¹⁰Po that is incorporated into the human body depends on the food habits and some difference in its levels could be observed between smokers and non-smokers.     

Simultaneous Anodic Stripping Voltammetric Determination of Pb and Cd,Using a Vibrating Gold Microwire Electrode,Assisted by Chemometric Techniques

Simultaneous anodic stripping voltammetric determination of Pb and Cd is restricted on gold electrodes as a result of the overlapping of these two peaks. This work describes the quantitative determination of a binary mixture system of Pb and Cd, at low concentration levels (up to 15.0 and 10.0 µg L^?1 for Pb and Cd, respectively) by differential pulse anodic stripping voltammetry (DPASV; deposition time of 30 s), using a green electrode (vibrating gold microwire electrode) without purging in a chloride medium (0.5 M NaCl) under moderate acidic conditions (HCl 1.0 mM), assisted by chemometric tools. The application of multivariate curve resolution alternating least squares (MCR‐ALS) for the resolution and quantification of both metals is shown. The optimized MCR‐ALS models showed good prediction ability with concentration prediction errors of 12.4 and 11.4 % for Pb and Cd, respectively. The quantitative results obtained by MCR‐ALS were compared to those obtained with partial least squares (PLS) and classical least squares (CLS) regression methods. For both metals, PLS and MCR‐ALS results are comparable and superior to CLS. For Cd, as a result of the peak shift problem, the application of CLS was unsuitable. MCR‐ALS provides additional advantage compared to PLS since it estimates the pure response of the analytes signal. Finally, the built up multivariate calibration models, based either in MCR‐ALS or PLS regression, allowed to quantify concentrations of Pb and Cd in surface river water samples, with satisfactory results.     

Extension and application of multivariate curve resolution-alternating least squares to four-way quadrilinear data-obtained in the investigation of pollution patterns on Yamuna River,India—A case study

This study focuses on the development and extension of Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) to the analysis of four-way datasets. The proposed extension of the MCR-ALS method with non-negativity and the newly developed quadrilinear constraints can be exploited to summarize and manage huge multidimensional datasets and resolve their four way component profiles. In this study, its application is demonstrated by analyzing a four-way data set obtained in a long term environmental monitoring study (15 sampling sites × 9 variables × 12 months × 7 years) belonging to the Yamuna River, one of the most polluted rivers of India and the largest tributary of the Ganges river. MCR-ALS resolved pollution profiles described appropriately the major observed changes on pH, organic pollution, bacteriological pollution and temperature, along with their spatial and temporal distribution patterns for the studied stretch of Yamuna River. Results obtained by MCR-ALS have also been compared with those obtained by another multi-way method, PARAFAC. The methodology used in this study is completely general and it can be applied to other multi-way datasets.     

Stereoselective synthesis of trans-3-functionalized-4-pyrazolo[5,1-b]thiazole-3-carboxylate substituted β-lactams: Potential synthons for diverse biologically active agents

Abstract

An efficient protocol for the stereoselective synthesis of pyrazolo[5,1-b]thiazole-3-carboxylate tethered β-lactam conjugates 8a–j from novel pyrazolo [5,1-b]thiazole-3-carboxylate substituted Schiff’s bases 6a–f is reported here. The reaction between various ketene precursors and novel Schiff’s bases 6a–f afforded exclusive formation of trans-β-lactams 8a–j. The substrate scope of this approach was investigated extensively by varying different groups (R, Z). All the novel compounds were characterized using various spectroscopic techniques, such as FT-IR, ¹H NMR, ¹³C NMR, elemental analysis, ¹³C NMR (DEPT-135), and mass spectrometry in representative cases. Single crystal X-ray crystallographic study of trans-ethyl 7-(1-(4-methoxyphenyl)-4-oxo-3-phenoxyazetidin-2-yl)-6-methyl-2-(methylthio)pyrazolo[5,1-b]thiazole-3-carboxylate 8a has confirmed the molecular structure and the stereochemical outcome. To the best of our knowledge, the synthesis of such types of Schiff’s bases and β-lactam conjugates has not been reported so far.