Application of the wavelet transform for a channel flow in a mixed convection phenomenon

The aim of this paper is to investigate laminar-turbulent transition in a mixed convection phenomenon occurring in a horizontal rectangular duct. Indeed, laminar-turbulent transition is well known in the case of forced convection but the presence of secondary flow induced by natural convection on this transition is not well highlighted. In this study, we will not be concerned by determining a critical threshold value of a Reynolds number of transition but only to estimate the degree of turbulence in the transition regime, i.e. weak turbulence in the case of a mixed convection phenomenon. This is possible thanks to the application of the wavelet transform. The calculation of the Hölder exponent, associated with the maximum value of the singularity spectrum for various experimental conditions allows the degree of turbulence to be measured. The variation of the Hölder exponent versus heat flux and Reynolds number enables us to show that there are two ways to go towards turbulence: thermal by increasing heat flux and hydrodynamic by increasing fluid velocity.     

A New Method to Measure the Coupling Efficiency of Waveguide Photodetector

In this paper, a new method is outlined for the estimation of coupling efficiency between a source laser and a WGPD. Internal quantum efficiencies as high as 72% (for 0.15 μm device) and 86.5% (for 0.5 μm device) are achieved.     

Assessment of the Formant Frequencies in Normal and Laryngectomized Individuals Using Linear Predictive Coding

The objective of this study was to assess the difference in voice quality as defined by acoustical analysis using sustained vowel in laryngectomized patients in comparison with normal volunteers. This was designed as a retrospective single center cohort study. An adult tertiary referral unit formed the setting of this study. Fifty patients (40 males) who underwent total laryngectomy and 31 normal volunteers (18 male) participated. Group comparisons with the first three formant frequencies (F1, F2, and F3) using linear predictive coding (LPC) (Laryngograph Ltd, London, UK) was performed. The existence of any significant difference of F1, F2, and F3 between the two groups using the sustained vowel /i/ and the effects of other factors namely, tumor stage (T), chemoradiotherapy, pharyngectomy, cricothyroid myotomy, closure of pharyngoesophageal segment, and postoperative complication were analyzed. Formant frequencies F1, F2, and F3 were significantly different in male laryngectomees compared to controls: F1 (P<0.001, Mann-Whitney U test), F2 (P<0.001, Student's t test), and F3 (P=0.008, Student's t test). There was no significant difference between females in both groups for all three formant frequencies. Chemoradiotherapy and postoperative complications (pharyngocutaneous fistula) caused a significantly lower formant F1 in men, but showed little effect in F2 and F3. Laryngectomized males produced significantly higher formant frequencies, F1, F2, and F3, compared to normal volunteers, and this is consistent with literature. Chemoradiotherapy and postoperative complications significantly influenced the formant scores in the laryngectomee population. This study shows that robust and reliable data could be obtained using electroglottography and LPC in normal volunteers and laryngectomees using a sustained vowel.     

Structure determination of bioactive galloyl derivatives by NMR spectroscopy

The investigation of the chemical constituents of Symplocos racemosa Roxb led to the isolation of two new glycosides, symcomoside A (1) and symcomoside B (2), together with one known glycoside, tortoside C (3), which is reported for the first time from this plant. The structures of the new compounds were determined by 1D and 2D homonuclear and heteronuclear NMR spectroscopy, from chemical evidence and by comparison with published data for closely related compounds. Symcomoside B (2) showed potent inhibitory activity against alpha-glucosidase in a concentration-dependent fashion with an IC50 value of 0.733 +/- 0.033 mM whereas symcomoside A (1) showed very weak inhibitory activity against alpha-glucosidase (9.90% in 0.70 mM).     

Pentadienyls vs cyclopentadienyls and reversal of metal-ligand bonding affinity with metal oxidation state: synthesis, molecular structures, and electronic structures of high-valent zirconium pentadienyl complexes

Molecules of the form Cp(6,6-dmch)ZrX(2) (Cp = eta(5)-cyclopentadienyl, X = Cl, Br, I; 6,6-dmch = eta(5)-6,6-dimethylcyclohexadienyl) have been synthesized, and the molecular and electronic structures have been investigated. These molecules allow direct comparison of the bonding and properties of pentadienyl and cyclopentadienyl ligands in the same high-oxidation-state metal complexes. Unlike the well-known Cp(2)ZrX(2) analogues, these Cp(6,6-dmch)ZrX(2) molecules are intensely colored, indicating significantly different relative energies of the frontier orbitals. Also unusual, the average Zr-C distances to the 6,6-dmch pentadienyl ligand are about 0.1 A longer than the average Zr-C distances to the cyclopentadienyl ligand for these Zr(IV) complexes, opposite of what is observed for the Zr(II) complex Cp(2,6,6-tmch)Zr(PMe(3))(2) (tmch = eta(5)-2,6,6-trimethylcyclohexadienyl), reflecting a dramatic reversal in the favorability of the bonding depending on the metal oxidation state. The experimental and computational results indicate that the color of the Cp(6,6-dmch)ZrX(2) complexes is due to a 6,6-dmch ligand-to-metal charge-transfer band. Compared to the Cp(2)ZrX(2) analogues, the Cp(6,6-dmch)ZrX(2) molecules have a considerably less stable HOMO that is pentadienyl-based and an essentially unchanged metal-based LUMO. Also, the lowest unoccupied orbital of pentadienyl is stabilized relative to cyclopentadienyl and becomes a better potential delta electron acceptor, thus contributing to the differences in structure and reactivity of the low-valent and high-valent metal complexes.     

Supercapacitive admittance tomoscopy

A sensor for measuring adsorption on a substrate has been designed including a contactless detection scheme, called supercapacitive admittance tomoscopy (SCAT). The sensor comprises a thin dielectric layer with two parallel band electrodes on the one side and a chemically modified surface on the other onto which the adsorption of molecules occurs. Upon application of a high frequency ac voltage between the two electrodes, a capacitive coupling is established across the dielectric layer, and the admittance measured depends on the surface state of the chemically modified interface. On the basis of this principle, a flow sensor has been developed to measure sensorgrams to follow the dynamics of the adsorption and has been tested for the adsorption of IgG on the modified surface.     

Ultrafast chemical interface scattering as an additional decay channel for nascent nonthermal electrons in small metal nanoparticles

The use of 4.2 nm gold nanoparticles wrapped in an adsorbates shell and embedded in a TiO2 metal oxide matrix gives the opportunity to investigate ultrafast electron-electron scattering dynamics in combination with electronic surface phenomena via the surface plasmon lifetimes. These gold nanoparticles (NPs) exhibit a large nonclassical broadening of the surface plasmon band, which is attributed to a chemical interface damping. The acceleration of the loss of surface plasmon phase coherence indicates that the energy and the momentum of the collective electrons can be dissipated into electronic affinity levels of adsorbates. As a result of the preparation process, gold NPs are wrapped in a shell of sulfate compounds that gives rise to a large density of interfacial molecules confined between Au and TiO2, as revealed by Fourier-transform-infrared spectroscopy. A detailed analysis of the transient absorption spectra obtained by broadband femtosecond transient absorption spectroscopy allows separating electron-electron and electron-phonon interaction. Internal thermalization times (electron-electron scattering) are determined by probing the decay of nascent nonthermal electrons (NNEs) and the build-up of the Fermi-Dirac electron distribution, giving time constants of 540 to 760 fs at 0.42 and 0.34 eV from the Fermi level, respectively. Comparison with literature data reveals that lifetimes of NNEs measured for these small gold NPs are more than four times longer than for silver NPs with similar sizes. The surprisingly long internal thermalization time is attributed to an additional decay mechanism (besides the classical e-e scattering) for the energy loss of NNEs, identified as the ultrafast chemical interface scattering process. NNEs experience an inelastic resonant scattering process into unoccupied electronic states of adsorbates, that directly act as an efficient heat bath, via the excitation of molecular vibrational modes. The two-temperature model is no longer valid for this system because of (i) the temporal overlap between the internal and external thermalization process is very important; (ii) a part of the photonic energy is directly transferred toward the adsorbates (not among "cold" conduction band electrons). These findings have important consequence for femtochemistry on metal surfaces since they show that reactions can be initiated by nascent nonthermal electrons (as photoexcited, out of a Fermi-Dirac distribution) besides of the hot electron gas.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Divergent Synthesis of Molecular Winch Prototypes

We report the synthesis of conceptually new prototypes of molecular winches with the ultimate aim to investigate the work performed by a single ruthenium-based molecular motor anchored on a surface by probing its ability to pull a load upon electrically-driven directional rotation. According to a technomimetic design, the motor was embedded in a winch structure, with a long flexible polyethylene glycol chain terminated by an azide hook to connect a variety of molecular loads. The structure of the motor was first derivatized by means of two sequential cross-coupling reactions involving a penta(4-halogenophenyl)cyclopentadienyl hydrotris(indazolyl)borate ruthenium(II) precursor and the resulting benzylamine derivative was next exploited as key intermediate in the divergent synthesis of a family of nanowinch prototypes. A one-pot method involving sequential peptide coupling and Cu-catalyzed azide-alkyne cycloaddition was developed to yield four loaded nanowinches, with load fragments encompassing triptycene, fullerene and porphyrin moieties.     

Krasnoselski-Mann type iterative method for hierarchical fixed point problem and split mixed equilibrium problem

In this paper, we suggest and analyze a Krasnoselski-Mann type iterative method to approximate a common element of solution sets of a hierarchical fixed point problem for nonexpansive mappings and a split mixed equilibrium problem. We prove that sequences generated by the proposed iterative method converge weakly to a common element of solution sets of these problems. Further, we derive some consequences from our main result. Furthermore, we extend the considered iterative method to a split monotone variational inclusion problem and deduce some consequences. Finally, we give a numerical example to justify the main result. The method and results presented in this paper generalize and unify the corresponding known results in this area.