Glass open-tubular capillary columns with chemically bonded methyl-phenyl siloxane stationary phases of tailor made polarity

Summary The previously described method yielding apolar, chemically bonded methyl polysiloxane glass capillary columns was extended to the production of capillary systems of controlled polarity. The approach involved prior synthesis of a reactive methyl-phenyl polysiloxane polymer by copolymerisation of a mixture of dimethyl and diphenyl chlorosilanes. The polymer was then chemically bonded to the capillary glass surface to yield remarkably stable, high resolution analytical systems which were shown to be particularly well suited to the separation of biochemical mixtures at the subnanogram level. The principle of copolymerisation of differently substituted silanes confers to the method a considerable flexibility which could be used to devise polar capillary systems tailor made for a given analytical problem.     

Synthesis,characterization and biological activity of some 1,2,4‐triazine derivatives

4‐Amino‐6‐methyl‐3‐(2H)‐thioxo‐5‐(4H)‐oxo‐1,2,4‐triazine ( 1 ) was condensed with 2‐methyl (or phenyl)‐4H‐3,1‐benzoxazin‐4‐one ( 5a,b ) in boiling acetic acid to give compounds 8‐11 . Reacting 1 with chloroacetyl chloride afforded the corresponding chloroacetamido and triazinothiadiazine derivatives 12 and 13 . Condensing 2 with succinic anhydride and/or phthalic anhydride yielded compounds 14 and 15 . Benzoylation of 4‐amino‐6‐methyl‐3‐(2H)‐thioxo‐5‐(4H)‐oxo‐2‐(2,3,4,5‐tetra‐O‐acetyl‐α‐D‐glucopyra‐nosyl)‐1,2,4‐triazine ( 19 ) afforded the corresponding 4‐N,N‐dibenzoyl derivative 20 . Deblocking of the N‐2 glycoside 21 and the S‐glycoside 22 by methanolic ammonia gave compounds 23 and 24 . Acetylation of 4‐amino glycoside 25a afforded the corresponding 4‐mono‐ and 4‐diacetyl derivatives 26 and 27 . Deamination of 25a,b yielded compounds 28a,b . Methylation of compound 28b afforded the corresponding N4‐ and S‐methyl derivatives 29 and 30 .     

Offline estimation of 2D crystal lattice parameters by processing the electron diffraction image

Electron diffraction provides useful information about the internal composition of materials and has been in the use of material scientists for more than fifty years. In order to extract useful information from offline diffraction images, they are manually analyzed by using some photometric technique. Manual analysis is however a cumbersome, laborious and difficult task. To reduce the labors of material scientists one can employ image processing techniques to perform automated analysis, due to the well established popularity and clear evidence of widely used image processing techniques. In this work an image processing technique is being proposed for the extraction of 2D unit cell information from diffraction images on one hand and finding the 2D point group contained by the lattices on the other. The technique employs a morphological shrinking operation to find the center of each spot in the underlying preprocessed diffraction image. This is followed by the extraction of eight points with reference to the spot produced by the transmitted electron beam. The resultant nine points, i.e. the extracted eight plus the reference spot generated by the transmitted electron beam, are then subjected to symmetry operations, rotation symmetry and mirror symmetry, in polar coordinate system, to classify the point group of the lattice produced by the electron diffraction. One of the difficult task, even in manual analysis, is to ascertain the exact spot where the transmitted electron beam hit the sample at the time of realization of the image. This has been accurately and intuitively done by employing the notion that the transmitted spot must have greater number of pixels, with the highest gray value, among the diffracted spots. The proposed strategy has been applied to a sample set of various images and the results shows that the technique is efficient in determining the unit cell in 2D and classify the point group with good accuracy.     

Synthesis,Crystal Structure,and Conductivity Investigation of a New Monophosphate: (2-CH3OC6H4CH2NH 3)H2PO4

Chemical preparation, crystal structure, thermogravimetric and differential analysis, solid state ³¹P MAS NMR characterization, and IR spectroscopic investigations are given for a new organic cation dihydrogenmonophosphate, (2-CH₃OC₆H₄CH₂NH₃)H₂PO₄. This compound is monoclinic C2/c, with unit cell parameters a = 27.740(8), b = 4.827(2), c = 16.435(3) Å, β = 93.79(2)°, V = 2196 (1) ų, Z = 8, and ρ = 1.422 g · cm^?3. The crystal structure has been determined and refined to R = 0.046 (Rw = 0.056), using 1,746 independent reflections with I > 3σ (I). Its atomic arrangement can be described by infinite polyanions [H₂PO₄] _n ^{n ?}, organized in ribbons alternating with organic cations. Strong hydrogen bonds connect the different components. Electrical conductivity measurements show that the [2-CH₃OC₆H₄CH₂NH₃]H₂PO₄ has a low ionic conductivity value at 403 K.     

Ultra-lightweight paper foams: processing and properties

A methodology for producing a low density cellulose-based foam has been developed by combining a surfactant with pulp, mixing at high velocity to entrain air, and then drying in a non-restrained fashion. The structure of the foam, characterized through optical microscopy and X-ray computed tomographic microscopy, consists of pulp fibres in random orientations surrounding air bubbles along with large void spaces. Through careful design of experiments, the effect of fibre type, length distribution, surfactant, and air content on the mechanical behavior and permeability of the foam material was investigated. The results indicate that foamed cellulose materials can be produced at a strength of one-half the tensile strength of a standard handsheet, but having a relative density of only one percent. No chemical additives were used to enhance the strength of these samples as the properties of the foam material are enhanced simply through variation of the process parameters. Thus, a strong cellulose-based foam, with a density as low as 10 mg/cm³, can be fabricated using standard papermaking infrastructure and hence at low cost.     

Nickel Supported on Alkaline Earth Metal–Doped γ-Al2O3–La2O3 as Catalysts for Dry Reforming of Methane

Russian Journal of Applied Chemistry - Nickel catalysts supported on γ–Al2O3 doped with La2O3 and alkaline earth oxides (MgO, CaO, and SrO) were investigated in the dry reforming of...     

Synthesis,characterization and cytotoxic activity of diorganotin (IV) complexes with 4H-pyrido[1,2-a]pyrimidin-4-one derivatives

The coordination behaviour of the diorganotin (IV) compounds R₂SnCl₂ (where R = Me, Ph) with 4H-pyrido [1,2-a] pyrimidin-4-one derivatives (L) has been described. The complexes R₂SnCl₂ · L obtained have been characterized physicochemically and spectroscopically. The pyrimidin-4-one ligands were found to coordinate with R₂SnCl₂ species in a monodentate fashion, mainly via the oxygen atom of the 4-one group or possibly via the nitrogen atom of the (SINGLE BOND)C(DOUBLE BOND)N linkage (the less sterically hindered nitrogen of the pyrimidine derivative) to give pentacoordinate tin complexes. Of the complexes selected to be screened against five tumour cell lines, some exhibited significant in vitro activity.     

Microchemical surface analysis of two Numidian coins

This work is a contribution to the microchemical surface analysis of two Numidian coins. Numidia was an ancient kingdom of northern Algeria during 2nd and 1st century BC. Investigations were performed with scanning electron microscopy (SEM) coupled with energy dispersive spectrometry (EDS), energy dispersive X-ray fluorescence spectrometry (EDXRF) and X-ray diffraction (XRD). The identification of the coins was done thanks to the name initials and effigy of King Massinissa. SEM observations of coins showed heterogeneous surfaces. SEM and EDXRF analyses showed an alloy structure with copper (65%), antimony (19%) and lead (16%). The XRD identified a metal structure and corrosion products which were on the coin surfaces: Litharge (PbO), Hydrocerussite (Pb₃(CO₃)₂(OH)₂), Bindheimite (Pb₂Sb₂O₇) and Bystromite (MgSb₂O₆).     

Double-T metamaterial for parallel and normal transverse electric incident waves

Electric and magnetic hybridized plasmonic modes are obtained by stacking two T-shaped resonators. We show that head-to-toe configuration leads to inverse the hybridization. The frequency shift between the resonances is finely controlled by adjusting the gap between the two resonators. A negative refractive index close to -1 is numerically and experimentally demonstrated at 4.3 GHz for TE waves. This left-handed behavior is similar for parallel and normal TE incident wave vectors. The proposed double-T unit cell is well adapted for developing terahertz and IR metamaterials.     

Synthesis and spectroscopic studies on organotin(IV) complexes of some pyrazoles and pyrazol-5-ones and their antibacterial activity

A series of organotin(IV) complexes of the general formula R_xSnCl_4?x.L (where R=Me, n?Bu, Ph; x = 2 or 3; L = pyrazole or pyrazol-5-one) have been prepared and characterized by elemental analyses, IR and NMR spectroscopy. The ligands used were found to coordinate with R₃SnCl species as monodentate ligands via the more reactive nitrogen atom, to give pentacoordinate tin complexes, whilst they may coordinate with R₂SnCl₂ species as bidentate ligands through the N–N linkage to give hexacoordinate tin complexes. These were demonstrated mainly by spectroscopic data. The tautomeric behaviour of organotin complexes of pyrazol-5-one ligands in inert (CDCl₃) and donor (DMSO-d₆) solvents were also studied. The complexes were screened against six species of bacteria.