Novel tacrine-based acetylcholinesterase inhibitors as potential agents for the treatment of Alzheimer’s disease: Quinolotacrine hybrids

A new series of quinolotacrine hybrids including cyclopenta- and cyclohexa-quinolotacrine derivatives were designed, synthesized, and assessed as anti-cholinesterase (ChE) agents. The designed derivatives indicated higher inhibitory effect on the acetylcholinesterase (AChE) with IC₅₀ values of 0.285–100 µM compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 µM. Of these compounds, cyclohexa-quinolotacrine hybrids displayed a little better anti-AChE activity than cyclopenta-quinolotacrine hybrids. Compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c'] diquinolin-6-one (6m) including 3-hydroxyphenyl and cyclohexane ring moieties exhibited the best AChE inhibitory activity with IC₅₀ value of 0.285 µM. The kinetic and molecular docking studies indicated that compound 6m occupied both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE as a mixed inhibitor. Using neuroprotective assay against H₂O₂-induced cell death in PC12 cells, the compound 6h illustrated significant protection among the assessed compounds. In silico ADME studies estimated good drug-likeness for the designed compounds. As a result, these quinolotacrine hybrids can be very encouraging AChE inhibitors to treat Alzheimer’s disease.

Graphic abstract

A novel series of quinolotacrine hybrids were designed, synthesized, and evaluated against AChE and BChE enzymes as potential agents for the treatment of AD. The hybrids showed good to significant inhibitory activity against AChE (0.285–100 μM) compared to butyrylcholinesterase (BChE) with IC₅₀ values of?>?100 μM. Among them, compound 8-amino-7-(3-hydroxyphenyl)-5,7,9,10,11,12-hexahydro-6H-pyrano[2,3-b:5,6-c′] diquinolin-6-one (6 m) bearing 3-hydroxyphenyl moiety and cyclohexane ring exhibited the highest anti-AChE activity with IC₅₀ value of 0.285 μM. The kinetic and molecular docking studies illustrated that compound 6 m is a mixed inhibitor and binds to both the catalytic anionic site (CAS) and peripheral anionic site (PAS) of AChE.

     

Two-step photoionization of Na2: dependence on alignment

Laser light is used for two-step photoionization of Na₂. the first step depends on the moleculer orientation, the second step doesnot. This yields a method for the analysis of molecular alignment.     

The role of hydrogen bonds in thermodynamic and structural properties in binary mixtures of morpholine + 2-methylcyclohexanol: a combined experimental and computational study

Structural Chemistry - Thermodynamic properties of binary mixtures of 2-methylcyclohexanol with morpholine are measured as a function of composition and temperature. The excess molar volumes were...     

Green synthesis,characterization, and biological activities of saffron leaf extract-mediated zinc oxide nanoparticles: A sustainable approach to reuse an agricultural waste

To increase the profitability and sustainability of agricultural waste, a facile green approach was established to synthesize zinc oxide nanoparticles (ZnO NPs) using saffron leaf extract as a reducing and stabilizing agent. Structural characteristics of NPs were investigated by X-ray diffraction (XRD), Fourier-transform infrared (FTIR), field emission scanning electron microscopy (FESEM), and UV–Visible (UV–Vis) spectroscopy. Characterization results revealed that ZnO NPs is highly crystalline with a hexagonal wurtzite structure and spherical particles with diameter less than 50 nm, as confirmed by XRD and FESEM techniques. UV–Vis absorption spectra depicted an absorption peak at 370 nm, which confirms the formation of ZnO NPs. FTIR spectral analysis confirmed the presence of functional groups and metal oxygen groups. The biological activities of ZnO NPs were also investigated. The antibacterial effect of ZnO NPs was investigated against selected food pathogens (Salmonella Typhimurium, Listeria monocytogenes, and Enterococcus faecalis). The study results prove that the green synthesized ZnO NPs show enhanced antibacterial activity against S. Typhimurium when compared with other strains. A dose-dependent free radical scavenging activity was observed for ZnO NPs in both 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) and fluorescence recovery after photobleaching (FRAP) assays. The ZnO NPs were evaluated for their photocatalytic activity during the degradation of methylene blue (MB) dye in aqueous solutions. The maximum removal of MB achieved was 64% with an initial ZnO NP concentration of 12 mg/mL under UV light. The present study revealed that the agricultural waste (saffron leaf) provides a simple and eco-friendly option to sustainably synthesize ZnO NPs for use as a photocatalyst. In addition, this is the first report on saffron leaf-mediated synthesis of ZnO NPs.     

Novel toughened automotive clearcoats modified by a polyester‐amide hyperbranched polymer: structural and mechanical aspects

The present work attempts to study the mechanical properties and toughness behavior of a typical acrylic melamine clearcoat modified by a polyester‐amide hyperbranched polymer (HBP). Formulations were such that 0, 5, 10, 25 and 50% (molar percent) of total acrylic hydroxyl groups were stoichiometrically substituted by those of HBP. Bulk and surface of the clearcoats were studied by various mechanical techniques including hardness, tensile, dynamic mechanical thermal analysis (DMTA), nano‐indentation and scratch tests. In addition a scanning electron microscope (SEM) was utilized to observe the morphology of the fractured films. The bulk mechanical properties showed that a low loading (5 molar %) of HBP was sufficient to considerably increase the bulk hardness, cross‐linking density and toughness. DMTA and SEM results proved the occurrence of a single‐phase blend and that the shear deformation was the main toughening mechanism of HBP modified clearcoats. In general, it was revealed that the HBP not only could act as an excellent compatible toughening agent, but also maintained the clarity of the clearcoat and increased its scratch resistance. Copyright © 2013 John Wiley & Sons, Ltd.     

Gold Spherical and Flake Assemblies Fabrication Through Calcination of Gold Nanoparticles Incorporated Poly(acrylonitrile) Nanofibers

Journal of Cluster Science - This work reports on the outcome of the calcination of gold nanoparticles incorporated polyacrylonitrile nanofibers in air which results in the formation of gold...     

A combined experimental and computational investigation of the binary mixtures of 2-methylcyclohexanol and isobutanol

Structural Chemistry - The measured densities and viscosities of the binary mixtures of the isobutanol and 2-methylcyclohexanol were reported experimentally in a certain range of concentrations at...     

Uncatalyzed synthesis of 3-amino-1,5-dihydro-2H-pyrrol-2-ones

Uncatalyzed one-pot pseudo-four-component reaction of ethyl pyruvate, anilines, and aldehydes in n-hexane as solvent, under reflux, affords a variety of 3-amino-1,5-dihydro-2H-pyrrol-2-ones in high yield. n-Hexane is an excellent driving force in preparation of the desired products. These compounds have biological and pharmacological properties and are also used in medicinal chemistry. Use of a non-toxic and inexpensive solvent, simple and efficient synthesis, clean work-up, and high yields of the products are the advantages of this method. We report the first catalyst-free method for synthesis this class of compounds.     

Computational studies on the conformational preference of N-(Thiazol-2-yl) benzamide

N-(Thiazol-2-yl) benzamide 1 substructures are found in some of bioactive compounds. In some of protein/ligand co-crystals, the 1 moiety adopts a conformer in which the amide O and the thiazole S atoms are close. In fact, in the crystalline structure of 1 , the O—S distance is even shorter than Van der Waals radius. Although the natural bond orbital analysis finds a weak stabilizing interaction between O and S atoms, the attractive dipole–dipole interaction between the amide N─H and thiazole N atom seems to play a more significant role. Moreover, an intramolecular O—H hydrogen bonding in dimeric forms found to have an important role in the conformation preference of 1 . Computational details for the stability of conformers have been discussed using quantum theory of atoms in molecules, natural bond orbital (NBO) and noncovalent interaction index analysis.     

Is Genetic Engineering a Route to Enhance Microalgae-Mediated Bioremediation of Heavy Metal-Containing Effluents?

Contamination of the biosphere by heavy metals has been rising, due to accelerated anthropogenic activities, and is nowadays, a matter of serious global concern. Removal of such inorganic pollutants from aquatic environments via biological processes has earned great popularity, for its cost-effectiveness and high efficiency, compared to conventional physicochemical methods. Among candidate organisms, microalgae offer several competitive advantages; phycoremediation has even been claimed as the next generation of wastewater treatment technologies. Furthermore, integration of microalgae-mediated wastewater treatment and bioenergy production adds favorably to the economic feasibility of the former process—with energy security coming along with environmental sustainability. However, poor biomass productivity under abiotic stress conditions has hindered the large-scale deployment of microalgae. Recent advances encompassing molecular tools for genome editing, together with the advent of multiomics technologies and computational approaches, have permitted the design of tailor-made microalgal cell factories, which encompass multiple beneficial traits, while circumventing those associated with the bioaccumulation of unfavorable chemicals. Previous studies unfolded several routes through which genetic engineering-mediated improvements appear feasible (encompassing sequestration/uptake capacity and specificity for heavy metals); they can be categorized as metal transportation, chelation, or biotransformation, with regulation of metal- and oxidative stress response, as well as cell surface engineering playing a crucial role therein. This review covers the state-of-the-art metal stress mitigation mechanisms prevalent in microalgae, and discusses putative and tested metabolic engineering approaches, aimed at further improvement of those biological processes. Finally, current research gaps and future prospects arising from use of transgenic microalgae for heavy metal phycoremediation are reviewed.