Study of fiber optic sugar sensor

Over the last two decades, the fiber optic technology has passed through many analytical stages. Some commercially available fiber optic sensors, though in a small way, are being used for automation in mechanical and industrial environments. They are also used for instrumentation and controls. In the present work, an intensity-modulated intrinsic fiber optic sugar sensor is presented. This type of sensor, with slight modification, can be used for on-line determination of the concentration of sugar content in sugarcane juice in sugar industry. In the present set-up, a plastic fiber made of polymethylmethacrylate is used. A portion of the cladding (1 cm, 2 cm, 3 cm) at the mid-point along the length of the fiber is removed. This portion is immersed in sugar solution of known concentration and refractive index. At one end of the fiber an 850 nm source is used and at the other end a power meter is connected. By varying the concentration of sugar solution, the output power is noted. These studies are made due to the change in refractive index of the fluid. The device was found to be very sensitive which is free from EMI and shock hazards, stable and repeatable and they can be remotely interfaced with a computer to give on-line measurements and thus become useful for application in sugar industries.     

Moisture sorption, transport, and hydrolytic degradation in polylactide

Management of moisture penetration and hydrolytic degradation of polylactide (PLA) is extremely important during the manufacturing, shipping, storage, and end-use of PLA products. Moisture transport, crystallization, and degradation, in PLA have been measured through a variety of experimental techniques including size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Quartz crystal microbalance and dynamic vapor sorption experiments have also been used to measure moisture sorption isotherms in PLA films with varying crystallinity. A surprising result is that, within the accuracy of the experiments, crystalline and amorphous PLA films exhibit identical sorption isotherms.     

Catalytic conversion of 2-propanol on La2MnZnO6

The perovskite La₂MnZnO₆ has been synthesized by a ceramic technique and its catalytic activity has been tested for 2-propanol decomposition. The catalyst is totally selective to dehydrogenation of the alcohol. A possible mechanism for the reaction is proposed.

---

La₂MnZnO₆ 2-. . .

     

Molecular aggregation in the ternary system deca glycerol dioleate/heptane/water

The phase diagram for the ternary system deca glycerol dioleate(DGD)/heptane/water was established at 25 °C. In this phase diagram it was seen that the reverse micellar solution phase extends in its area until the water content reaches 35–45 wt%, at which a liquid crystalline phase begins to appear. On the basis of the experimental results of specific conductivity, viscosity, etc. for the samples containing a definite amount of DGD (0,1 M), and varying relative amounts of heptane and water, the mechanism of the transition of reverse micellar structures to liquid crystalline phase is discussed.     

Differentiation of Boc- alpha,beta- and beta,alpha-peptides and a pair of diastereomeric beta,alpha-dipeptides by positive and negative ion electrospray tandem mass spectrometry (ESI-MS/MS)

Positive and negative ion electrospray ionization (ESI) tandem mass spectral study of a new series of hybrid peptides, viz, BocN-alpha,beta-peptides and BocN-beta,alpha-peptides, synthesized from C-linked carbo-beta3-amino acids [Caa (S)] and L-Ala has been carried out. The alpha,beta-peptides have been differentiated from beta,alpha-peptides by the collision-induced dissociation (CID) of [M + H]+ and [M - H]- ions in positive and negative ion ESI-MS respectively. The fragment ion [M + H - C(CH3)3 + H]+ formed from [M + H]+ ions by the loss of 2-methyl-prop-2-ene in alpha,beta-peptides with L-Ala at the N-terminus is insignificant or totally absent for beta,alpha-peptides which have the Caa (S) at N-terminus. The fragment ion [M - H-C(CH3)3OH - HNCO]- formed from [M - H]- of beta,alpha-peptide acids is totally absent for alpha,beta-peptide acids. This has been attributed to the absence of the beta-methylene group in alpha,beta-peptides, and the participation of the beta-methylene group in the loss of HNCO in beta,alpha-peptide acids is confirmed by the deuteration experiments. The CID of [M + H-Boc + H]+ ions of these peptides also produce characteristic fragmentation. In the CID spectra of alpha,beta-peptides, the b(n)+ ions and the resulting y(n)+ ions occur at a mass difference of 243 and 71 Da corresponding to the successive losses of Caa and L-Ala, whereas a mass difference of 71 and 243 Da is observed for beta,alpha-peptides. In contrast to the CID of protonated peptides, the CID of [M - H]- ions of the alpha,beta- and beta,alpha-peptide acids do not give b(n)- ions and show abundant z(n) (-) ions. Further, a pair of diastereomeric dipeptide esters and acids have been distinguished by the CID of [M + H]+ ions. The loss of 2-methyl-prop-2-ene is more pronounced for Boc-NH-Caa(R)-D-Ala-OCH3 (21) and Boc-NH-Caa(R)-D-Ala-OH (23) with Caa (R) at the N-terminus, whereas it is totally absent for Boc-NH-Caa (S)-D-Ala-OCH3 (22) and Boc-NH-Caa(S)-D-Ala-OH (24) peptides, which have Caa (S) at the N-terminus. Thus, on the basis of our previous and present studies, we propose that the CID of [M + H]+ ions provides a simple and useful method for distinguishing the configuration of Caa (S or R) at the N-terminus of BocN-carbo beta,alpha- and beta,beta-dipeptides.     

A versatile and practical synthesis of bis(indolyl)methanes/bis(indolyl)glycoconjugates catalyzed by trichloro-1,3,5-triazine

A practical and efficient electrophilic substitution reaction of indoles with a variety of aldehydes was carried out using catalytic trichloro-1,3,5-triazine (10 mol %) in acetonitrile to furnish the corresponding bis(indolyl)methanes in excellent yields. Similarly, sugar derived aldehydes gave hitherto unknown bis(indolyl)glycoconjugates in very good yields.     

Polyaniline film formation in hexadecyl trimethyl ammonium bromide admicelles on hydrous zirconia surface

Formation of a thin polyaniline film on hydrous zirconia (ZrO2) surface was carried out using adsorbed surfactant bilayers on ZrO2 as reaction sites. Aniline was adsolubilized in hexadecyltrimethylammonium bromide (HDTAB) admicelles formed on the surface of ZrO2 by adsorption. Subsequent polymerization of the adsolubilized aniline monomer showed effective conversion of aniline to polyaniline. The formation of the polyaniline coated ZrO2 has been confirmed by UV-visible spectroscopy, FT-IR spectroscopy, and conductivity measurements. Various parameters involved during the adsorption process were studied. Selection of pH 9.0 as the pH of all experimental feed solutions was governed by the knowledge of point of zero charge (PZC) of ZrO2. Effect of aniline concentration on HDTAB adsorption was studied and it was observed that increase in aniline concentration decreased the amount of HDTAB adsorbed on ZrO2. Addition of salt (0.05 M NaCl) in the feed solution increased HDTAB adsorption and drastically reduced the effect of aniline concentration on HDTAB adsorption.