Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Some observations on the synthesis and HPLC of tris-(acetylacetonato)technetium(III) and (IV) complexes

[⁹⁹Tc(III) (acac)₃] was synthesized by published procedure, but recovered by extraction into CH₂Cl₂. The product was purified by preparative HPLC over a reversed phase column, RP18, using a mobile phase of 11 CH₃OHH₂O. The cationic complex [⁹⁹Tc(IV) (acac)₃]⁺ prepared by the oxidation of the purified neutral Tc(III) complex was unstable in methanol/methanol-water medium, being reduced back to the Tc(III) complex.     

Inclusion of α-phenyl-N-p-methylphenyl Nitrone in β- Cyclodextrin: Formation of 1G : 1H and 1G : 2H Complexes and the Remarkably Fast 1,3-Dipolar Cycloaddition of the 1G : 2H Complex with Olefins in the Solid State

The nitrone is found to be included in the -cyclodextrin cavity in two different stoichiometries viz., 1G : 1H and 1G : 2H – the existence of which is proved by physical methods. The 1G : 2H complex of the nitrone serves as a good potent dipolarophile in the 1,3-dipolar cycloaddition reactions with olefins resulting in rate acceleration and regioselection.     

Ab initio study of (13)C(alpha) chemical shift anisotropy tensors in peptides

This study reports magnitudes and the orientation of the (13)C(alpha) chemical shift anisotropy (CSA) tensors of peptides obtained using quantum chemical calculations. The dependency of the CSA tensor parameters on the energy optimization of hydrogen atom positions and hydrogen bonding effects and the use of zwitterionic peptides in the calculations are examined. Our results indicate that the energy optimization of the hydrogen atom positions in crystal structures is necessary to obtain accurate CSA tensors. The inclusion of intermolecular effects such as hydrogen bonding in the calculations provided better agreement between the calculated and experimental values; however, the use of zwitterionic peptides in calculations, with or without the inclusion of hydrogen bonding, did not improve the results. In addition, our calculated values are in good agreement with tensor values obtained from solid-state NMR experiments on glycine-containing tripeptides. In the case of peptides containing an aromatic residue, calculations on an isolated peptide yielded more accurate isotropic shift values than the calculations on extended structures of the peptide. The calculations also suggested that the presence of an aromatic ring in the extended crystal peptide structure influences the magnitude of the delta(22) which the present level of ab initio calculations are unable to reproduce.     

Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

Studies on the feasibility of production of57Co by alpha bombardment of Mn and Ni targets

We have studied the feasibility of producing⁵⁷Co (271.3 d) via the⁵⁵Mn(, 2n)⁵⁷Co reaction (⁵⁵Mn–100%). The thick target yield of⁵⁷Co in the 28 to 18 MeV energy region was measured as 3.87 Ci/Ah. However, the proximity and overlap of the excitation functions for (, n), (, 2n) and (, 3n) reactions on⁵⁵Mn are such that the production of pure⁵⁷Co in high yields free of⁵⁸Co (70.8 d) and⁵⁶Co (78.8 d) has not been feasible. We have also studied a new method for ancillary production of⁵⁷Co via the reactions⁵⁸Ni(, p)⁵⁷Co and during the course of producing⁶²Zn by⁶⁰Ni(, 2n)⁶²Zn reaction. In this case the yield of⁵⁷Co of reasonable purity has been up to 1 Ci/Ah.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Anilate Tethered Neutral Tetrahedral Pd(II) Cages Exhibiting Selective Encapsulation of Xylenes and Mesitylene

The design of porous materials for the recognition of multiple hydrocarbons is highly desirable for the energy-efficient separation and recognition of chemical feedstock. Herein, three new iso-structural porous discrete metal–organic cages of formula {[Pd₃(NiPr)₃PO]₄(R-AN)₆} (R-AN=anilate linkers) for the selective recognition of substituted aromatic hydrocarbons are reported. The tetrahedral cages 1 , 2 , and 3 containing anilate, chloranilate, and bromanilate linkers exhibited selective encapsulation of mesitylene, o-xylene, and p-xylene, respectively, over other analogous aromatic hydrocarbons. These selective encapsulations were driven by the variations in the portal diameters present at each of these cages and their interactions with the hydrocarbon guests. These observations are supported by mass spectrometry, NMR studies, and theoretical binding-energy calculations.