排序方式: 共有12条查询结果,搜索用时 15 毫秒
1.
Tero Taipale Susanna Holappa Janne Laine 《Journal of Dispersion Science and Technology》2013,34(6):863-873
Four different types of cellulosic fines were isolated from refiner mechanical and kraft pulp samples to characterize their chemical and physical properties. The pulp fines were flocculated using four different types of cationically modified polyacrylamides. The extent of flocculation was observed with multiple light scattering apparatus. The maximum adsorption of the polyelectrolytes on the pulp fines was determined by polyelectrolyte titration. It was concluded that it is the combination of the molar mass and the charge density of a polyelectrolyte, as well as the origins and characteristics of the fines which define the adsorption and flocculation behavior. None of these properties alone could fully describe these phenomena, but the molar mass of the polyelectrolyte was the predominant factor. The most important fines characteristics were the charge properties and the microstructure. 相似文献
2.
Marko Ahlmark Tomi Järvinen Hannu Taipale Riku Niemi Jouko Vepsäläinen 《Phosphorus, sulfur, and silicon and the related elements》2013,188(1)
Abstract Clodronate (1) belongs to family of bisphosphonates which are used to inhibit mineralization of soft tissues as well as bone formation and resorption disorders.[I] The clinical use of bisphosphonates is limited due to their poor bióvailability which is mostly attributed to their hydrophilic structure. More lipophilic molecules are obtained if some or all of the anionic sites are converted to covalent bonds. We herein report a new prodrug serie for clodronate: the anhydrides 2 and 3. Previously we have reported that the simple alkyl esters 4 do not release clodronate via chemical or enzymatic hydrolysis.[2] The prepared new derivatives are stable in water (pH 5–7.5) but clodronate isrelased rapidly with enzymatic hydrolysis. 相似文献
3.
Tero Taipale Monika Österberg Antti Nykänen Janne Ruokolainen Janne Laine 《Cellulose (London, England)》2010,17(5):1005-1020
Different types of microfibrillated cellulose (MFC) and fines suspensions were produced, characterized, and then added to
a papermaking pulp suspension. High and medium molar mass cationic polyelectrolytes were used as fixatives. The drainage behavior
of the pulp suspensions with additives were evaluated against the strength properties of hand sheets made thereof. The effects
of salt concentration, pH, fixative type, dosage and type of fibrillar material on drainage were examined. All the MFC and
fines samples produced had clearly different properties due to their dissimilar production methods, and they also introduced
specific responses on the measured drainage and paper strength. Generally, the addition of MFC decreased the drainage rate
of pulp suspension and increased the strength of paper. However, it was shown that by optimum selection of materials and process
conditions an enhancement of the strength properties could be achieved without simultaneously deteriorating the drainage. 相似文献
4.
Jorma Eloranta Jaakko Paasivirta Reijo Moilanen Raili Vesterinen 《Magnetic resonance in chemistry : MRC》1972,4(4):565-570
Radical anions of 1-phenyl-3-chloronortricyclene and 1-phenylnortricyclene were produced by reduction with potassium in 1,2-dimethoxyethane under a high vacuum. The initially formed radical anion of 1-phenyl-3-chloronortricyclene was very unstable, and decomposed finally to the anions of naphthalene and biphenyl. The only product of the reduction of 1-phenylnortricyclene was the biphenyl anion. The EPR spectra of the reaction mixtures were measured at temperatures from —80°C to room temperature. 相似文献
5.
Raili Pönni Lauri Rautkari Callum A. S. Hill Tapani Vuorinen 《Cellulose (London, England)》2014,21(3):1217-1226
Deuterium exchange in a deuterium oxide (D2O) atmosphere (95 % relative humidity), quantified by a dynamic vapor sorption (DVS) apparatus, was applied for assessing the accessibility of hydroxyl groups in birch kraft pulps. Achieving the maximum deuteration level exhibited slower kinetics than was earlier reported for experiments with ground wood and bacterial cellulose. The deuterium exchange process followed two parallel phenomena. Applying multiple drying and rewetting cycles gave kinetic information also on the hornification phenomenon occurring during these cycles. Dry birch pulps treated with sodium hydroxide solution of varying alkalinities at elevated temperatures were assessed for their accessible hydroxyl groups by DVS with deuterium exchange. This method was evaluated against deuteration combined with Fourier transform infra-red spectroscopy and water retention value (WRV). DVS measurements were in correlation with WRV and both the methods indicated that an alkaline treatment of dry birch pulp improves cellulose accessibility. The level of irreversible deuteration also decreased as the alkalinity was increased. DVS was shown to provide quantitative information on the accessibility but to be a time-consuming method for the pulp samples. A potential means to decrease the duration of the measurement is increased D2O exposure by excluding the drying phases. 相似文献
6.
Joakim M. Johansen Martti Aho Kari Paakkinen Raili Taipale Helge Egsgaard Jon G. Jakobsen Flemming J. Frandsen Peter Glarborg 《Proceedings of the Combustion Institute》2013,34(2):2363-2372
Studies of the release of critical ash-forming elements from combustion of biomass are typically conducted with small sample masses under well controlled conditions. In biomass combustion on a grate, secondary recapture and release reactions in the fuel-bed may affect the overall release and partitioning of these elements. Earlier work by the authors on the release of K, Cl, and S from a high-chlorine biomass (corn stover) in a lab-scale setup is, in the present work, supplemented with novel results from a bench-scale fixed bed reactor and a 100 kW moving grate pilot facility. The results from the bench-scale reactor indicate that S and K release are not significantly affected by secondary reactions, while Cl is partly recaptured by secondary reactions in the char. A linear increase in K-release was observed from 50% at 906 °C to almost 80 wt.% at 1234 °C when firing only corn stover. A similar release profile was observed for Cl, from 65% to nearly 100%. Complete release of S was achieved at 1234 °C with a linear increase from 70% at 906 °C. Co-combustion of corn stover with low-Cl wood chips served to increase the bed temperature, resulting in complete and close to complete release of Cl and S, respectively. An increase in the relative K-release was observed when increasing the wood chip fraction from 40% to 100% (energy basis). Pilot scale flue gas results indicate that the share of Cl released as HCl decreases towards 0% as the share of wood chips is increased towards 100%. Hence, co-combustion of corn stover with wood chips is expected to decrease the absolute release of KCl due to the lower feedstock quantity of Cl, however, increase the relative release of Cl as KCl. 相似文献
7.
Essi Taipale Marcel Siepmann Dr. Khai-Nghi Truong Prof. Kari Rissanen 《Chemistry (Weinheim an der Bergstrasse, Germany)》2021,27(69):17412-17419
The synthesis of iodine(I) complexes with either benzoimidazole or carbazole-derived sp2 N-containing Lewis bases is described, as well as their corresponding silver(I) complexes. The addition of elemental iodine to the linear two-coordinate Ag(I) complexes produces iodine(I) complexes with a three-center four-electron (3c–4e) [N−I−N]+ bond. The 1H and 1H-15N HMBC NMR studies unambiguously confirm the formation of the complexes in all cases via the [N−Ag−N]+→[N−I−N]+ cation exchange, with the 15N NMR chemical shift change between 94 to 111 ppm when compared to the free ligand. The single crystal X-ray crystallographic studies on eight I+ complexes revealed highly symmetrical [N−I−N]+ bonds with I−N bond distances of 2.21–2.26 Å and N−I−N angles of 177–180°, whilst some of the corresponding Ag+ complexes showed a clear deviation from linearity with N−Ag−N angles of ca. 150° and Ag−N bond distances of 2.09–2.18 Å. 相似文献
8.
Jaakko Paasivirta Jarmo Simanainen Raili Vesterinen Liisa Virkki 《Magnetic resonance in chemistry : MRC》1977,9(12):708-711
Proton, phosphorus and carbon magnetic resonance spectra of dimethoate, dimethoxon, des-N-methyldimethoate, ω-hydroxydimethoate, trimethyldithiophosphate and O,O-dimethyldithiophosphate in different solvents have been measured. Most of the n.m.r. parameters were characteristic of the structural environment of the corresponding nucleus and solvent-independent. However, in the amide structures dimethoate, dimethoxon, des-N-methyldimethoate and ω-hydroxydimethoate the 31P? S? C? 1H vicinal coupling showed an unusually large solvent effect of a 2.3 to 6.5 Hz decrease when CDCI3 was replaced by acetone-d6 or DMSO-d6. 相似文献
9.
Jaakko Paasivirta Raili Versterinen Liisa Virkki Pekka Pyykk 《Magnetic resonance in chemistry : MRC》1977,10(1):265-266
Proton and carbon magnetic resonance spectra of Lewisite or dichloro(trans-2-chlorovinyl)arsine have been measured and the results are compared with the n.m.r. spectral parameters of other trans-1,2-substituted ethylenes. The coupling constants can be rationalized by substituent electronegativity. The chemical shifts show an unusually large paramagnetic effect from the AsCl2 group. 相似文献
10.
Timo Pääkkönen Katarina Dimic-Misic Hannes Orelma Raili Pönni Tapani Vuorinen Thad Maloney 《Cellulose (London, England)》2016,23(1):277-293
alkali-washed nanofibrillated cellulose (NFC) samples, obtained from hardwood kraft pulp, with different amounts of retained xylan were prepared to study the influence of xylan on the water-retention properties of NFC suspensions. In this study, NFC was produced using an oxoammonium-catalyzed oxidation reaction that converts the cellulosic substrate to a more highly oxidized material via the action of the nitroxide radical species 2,2,6,6-tetramethylpiperidine-1-oxyl. Reduction of the xylan content in NFC was achieved by cold alkali extraction of kraft pulp. The pulps were then oxidized to a set charge under constant chemical conditions, and the reaction time was determined. The xylan content of the feed pulp was found to have a large negative influence on the oxidation rate of the pulp, as the oxidation time shortened when xylan was removed, from 220 min (for 25.2 % xylan content) to 28 min (for 7.3 % xylan content). Following fibrillation by homogenization, the swelling of the NFC was determined by a two-point solute exclusion method. The distribution of hemicellulose over the fibril surface was observed by atomic force microscopy. Xylan was found to be distributed unevenly over the surface, and its presence increased the water immobilized within flocs of NFC, i.e., so-called network swelling. The swelling of the NFC had a large impact on its rheology and dewatering. Comparison of the morphological and swelling properties of the suspensions with their rheological and dynamic dewatering behavior showed that reducing the xylan content in NFC results in a weaker gel structure of the nanocellulose suspension. The results indicate that most of the water is held by the swollen structure by means of xylan particles trapped within the hemicellulose layer covering the fibril surface. Samples with high xylan content had high shear modulus and viscosity and were difficult to dewater. 相似文献