Membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene–perfluorovinyl ether)

Some properties of the membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene-perfluorovinyl ether) copolymer (PFA) films have been investigated. The dimensional change caused by grafting and swelling behavior, water uptake, electrical conductivity, and mechanical properties of the grafted films were found to increase as the grafting proceeds. The influence of the preparation conditions (such as preirradiation dose, monomer concentration, grafting temperature, and film thickness) on those properties was studied. These properties were found to be dependent mainly on the degree of grafting regardless of grafting conditions, except at higher monomer concentration (>40 wt %). The electric conductivity and mechanical properties for the membranes obtained at higher AAc concentrations were lower than those obtained at lower ones. Analysis by x-ray microscopy of the grafted films revealed that the grafting begins at the part close to the film surface and proceeds into the central part with progressive diffusion of monomer to give finally homogeneous distribution of the electrolytes in the whole bulk of the polymer. The membranes show good electrochemical and mechanical properties which make them acceptable for practical use as cation-exchange membranes.     

Aqueous polymerization of methyl methacrylate catalyzed by copper metal and some of its compounds

The aqueous polymerization of methyl methacrylate (MMA) with sodium bisulfite as initiator was carried out in a nitrogen atmosphere with and without inorganic substances like copper metal, cupric and cuprous oxides, and cupric sulfide. It was also done in the presence of organocopper compounds like copper phthalocyanine and copper biphthalocyanine. The catalytic effect of these compounds was studied. Mildly heated cupric sulfide proved to have a small catalytic effect on the polymerization process that may be attributed to the retarding effect of the released elementary sulfur. The catalytic effect of the different copper compounds and the copper metal equivalent contained in them was studied. The polymerization process revealed that cuprous and cupric oxides possess the highest catalytic influence. An attempt was made to investigate the role of the different anions on the polymerization process. It was found that an increase on the concentration of the copper compounds leads to a corresponding increase in the catalytic effect. It was also observed that the behavior of insoluble copper catalysts is different from that of the soluble. The effect of these catalysts on the average molecular weight of the poly(methyl methacrylate) (PMMA) produced was also examined.     

Study of energy transfer to solvent in radiation graft polymerization of styrene onto polyethylene

The radiation-initiated graft polymerization of styrene onto polyethylene was studied to determine whether energy transfer to diluent was responsible for the previously observed high orders of dependence of the grafting rate on monomer concentration. n-Octane was used as the diluent instead of benzene. If energy transfer from excited polyethylene to benzene were present, it should not be with n-octane. The percent swelling of polyethylene by various n-octane–styrene mixtures was determined. The compositions of various n-octane–styrene mixtures absorbed inside polyethylene were determined by ultraviolet and refractive index measurements and found to be richer in styrene than the corresponding mixtures in which the polyethylene had been placed. The graft polymerization rates were determined at 0.000761, 0.0371, and 0.213 Mrad/hr and plotted against the inside styrene concentrations on a log-log scale to yield the kinetic orders of dependence of rate on monomer as 2,3, and 3, respectively. It was concluded that energy transfer to diluent was not responsible for the high-order dependence observed.     

Activities of Individual Ions From Infinite Dilution to Saturated Solutions

A new procedure, which provides a closer approximation for the junction potentials than the Henderson equation, is tested to reduce new emf data for the chloride ion in CsCl solutions and previously measured data for individual ions in aqueous solutions of KCl, NaCl, and NaBr. The liquid junction potential is calculated from numerical integration of its basic equation without assuming constant mobility or using concentrations instead of activities. The mean ionic activity coefficients of the salts, obtained from the activity coefficients of the individual ions, show good agreement with values reported in the literature. The activity coefficients of the individual chloride ion at 25°C in aqueous solutions of CsCl up to 3 molal and in KCl solutions were measured using a chloride ion-selective electrode. It has been confirmed that the activity of the chloride ion is equal to the activity of the cation in CsCl solutions and, contrary to the prediction of hydration theory, it is higher than the activity of the cation in aqueous KCl solutions. The New Hydration Theory has been developed to overcome the shortcomings of the older hydration theory and has been used to smooth the experimental activity coefficients of the individual ions in aqueous solutions and to extrapolate them up to the saturated solution.     

Sensing and photocatalytic properties of nanosized Cu(I)CN organotin supramolecular coordination polymer based on pyrazine

Orange prismatic crystals of the supramolecular coordination polymer (SCP) _∞³[Cu(CN)₂(Me₃Sn)(Pyz)], SCP 1 , were synthesized using a self‐assembly method under ambient conditions. Nanosized 1 was obtained using the same molar ratio in water by ultrasonic irradiation. SCP 1 was characterized using single‐crystal X‐ray diffraction, elemental analysis, thermal analysis and Fourier transform infrared spectroscopy. SCP 1 and its nanosized 1 particles were also examined using powder X‐ay diffraction and scanning electron microscopy. The luminescence emission of SCP 1 was studied as well as its use as a sensor for the detection of common organic solvents and metal ions. Also, the catalytic activities of nanosized 1 towards various organic dyes were investigated under ambient conditions, UV irradiation and ultrasonic irradiation. Nanosized 1 as a heterogeneous nanoparticle catalyst exhibits high catalytic activity for the degradation of eosin‐Y and acid blue dyes. The mechanism of degradation investigated using various scavenger techniques is proposed and discussed. The catalytic oxidation process is mainly caused by ?OH radicals.     

Biochemical Properties of Tyrosinase from Aspergillus terreus and Penicillium copticola; Undecanoic Acid from Aspergillus flavus,an Endophyte of Moringa oleifera,Is a Novel Potent Tyrosinase Inhibitor

Tyrosinase is a copper-containing monooxygenase catalyzing the O-hydroxylation of tyrosine to 3,4-dihydroxyphenylalanine then to dopaquinone that is profoundly involved in melanin synthesis in eukaryotes. Overactivation of tyrosinase is correlated with hyperpigmentation that is metabolically correlated with severe pathological disorders, so, inhibition of this enzyme is the most effective approach in controlling the overproduction of melanin and its hazardous effects. Thus, searching for a powerful, selective inhibitor of human tyrosinase to limit the hyper-synthesis of melanin is a challenge. Unlike the difficulty of overexpression of human tyrosinase, using fungal tyrosinase as a model enzyme to the human one to evaluate the mechanistics of enzyme inhibition in response to various compounds is the most feasible strategy. Thus, the purification of highly catalytic-efficient fungal tyrosinase, exploring a novel inhibitor, and evaluating the mechanistics of enzyme inhibition are the main objectives of this work. Aspergillus terreus and Penicillium copticola were reported as the most potential tyrosinase producers. The biochemical properties suggest that this enzyme displays a higher structural and catalytic proximity to human tyrosinase. Upon nutritional bioprocessing by Plackett–Burman design, the yield of tyrosinase was increased by about 7.5-folds, compared to the control. The purified tyrosinase was strongly inhibited by kojic acid and A. flavus DCM extracts with IC₅₀ values of 15.1 and 12.6 µg/mL, respectively. From the spectroscopic analysis, the main anti-tyrosinase compounds of A. flavus extract was resolved, and verified as undecanoic acid. Further studies are ongoing to unravel the in vivo effect and cytotoxicity of this compound in fungi and human, that could be a novel drug to various diseases associated with hyperpigmentation by melanin.     

氨三乙酸、缬氨酸、亮氨酸的三元过渡金属配合物：合成和生物学应用

以氨三乙酸HNTA2-为主要配体,缬氨酸(valine)或亮氨酸(leucine)为次要配体在微酸性介质中合成了Ni(Ⅱ),Cu(Ⅱ),and Zn(Ⅱ)的三元配合物。用元素分析、热分析、FTIR,UV-Vis分光光度法,磁性测量和质谱法表征了合成的三元配合物。结果表明,三元配合物可在金属(M):氨三乙酸(HNTA)∶缬氨酸(valine)或亮氨酸(leucine)=1∶1∶1时制得,其分子结构为[M(HNTA)(valine)(H2O)2].1.5H2O and[M(HNTA)(leucine)(H2O)2].1.5H2O(其中M=Ni(Ⅱ)or Cu(Ⅱ))和H2[Zn(NTA)(valine)(H2O)]H2O。标题三元过渡金属配合物为八面体对称构型。同时研究了该三元配合物对大肠杆菌,金黄色葡萄球菌,白色念珠菌,黄曲霉菌(菌株从开罗大学理学院微分析中心获得)的抗菌活性。根据推荐的知名方法用标准的抗菌和抗真菌剂进行体外测试(in vitro)以评估我们的新制备的配合物对细菌和真菌物种的生长抑制活性。     

Influence of Carbon Nanotubes on Phase Composition,Thermal and Post-Heating Behavior of Cementitious Composites

This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to elevated temperatures. Cement mortars with small dosages of CNTs, 0.05% and 0.2% by weight of cement, were prepared and then heated at 25 °C, 150 °C, 200 °C, 450 °C, and 600 °C for two hours before being tested. The results show positive impact of the CNTs on the hydration process of cement mortar at room temperature and at higher temperatures up to 200 °C. Decomposition of the hydration products is obvious at 450 °C, whereas sever deterioration in the microstructure occurs at 600 °C. The nano reinforcement and bridging effect of the CNTs are obvious up to 450 °C. Thermal behavior characterization shows that CNTs incorporation enhances the thermal conductivity of the unheated and heat-treated mortar specimens. The decomposition of the hydration products needs more heat in the presence of CNTs. Finally, presence of CNTs significantly enhances the residual compressive and flexural strengths of heated mortar specimens for all studied temperatures.     

Kinetics and mechanism of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) by N-bromosuccinimide in aqueous acidic medium

The kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by N-bromosuccinimide (NBS) in aqueous acid and H₂O–MeOH solvent mixtures were studied spectrophotometrically over the 20–40 °C range, 0.1–0.5 mol dm^?3 ionic strength, 2.2–2.8 pH range and 0–40 wt% MeOH–H₂O solvent mixtures for a range of NBS and complex concentrations. The rate shows first-order dependence on both [NBS] and [complex] and decreases with pH over the range studied. The protonated form of N-bromosuccinimide was identified as the main reactive species. An inner-sphere mechanism involving free radicals is proposed.