The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

This paper presents our recent simulation results and novel designs of single mode large cross-section glass-based waveguides for photonic integrated circuits (PICs). Simulations were performed using an in-house Finite Difference (FD) based mode solver and the FD Beam propagation Method (FD-BPM). Our simulation results show that this innovative technology could provide a simplified means to couple optical energy efficiently between optical components in a single chip. This would provide the base for the future large-scale integration of optical components in PICs. The novel idea of using single mode large cross-section glass-based waveguides as an optical integration platform is an evolutionary innovative solution for the monolithic integration of optical components, in which the glass-based structures act both as waveguides and as an optical bench for integration. This allows easy and efficient optical coupling between optical components and optical fibres, removing costly and tedious alignment problems and considerably reducing optical coupling losses in PICs. We expect that the glass-based waveguide PICs technology will enable the emergence of a new generation of compact, reliable, high speed, and multifunctional devices.     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Determination of calcium in water by flow injection analysis — inductively coupled plasma (FIA-ICP) emission spectrometry

Summary Using an 11 ml centrifugal type spray chamber, a rapid sample introduction rate of 320 injections per hour may be achieved when interfacing flow injection analysis and inductively coupled plasma emission spectrometric techniques. Calcium was determined in water samples with a relative standard deviation of better than 3.5% over the analytical range of 10 to 200 mg · l^–1 Ca. Mean recovery was 97%.

---

Calciumbestimmung im Wasser mit dem Flow-injection-Prinzip kombiniert mit der Induktions-gekoppelten Plasma-Emissions-Spektrometrie (FIA-ICP)

     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.     

Optimized separation of scopoletin and umbelliferone and cis-trans isomers of ferulic and p-coumaric acids by reverse-phase high-performance liquid chromatography

A systematic optimization strategy for reverse-phase h.p.l.c. is used to produce complete separation of all components of a mixture containing two coumarins, umbelliferone and scopoletin, and the cis-trans isomers of two cinnamic acids, p-coumaric and ferulic. A series of experiments gives retention time data for each of these substances in four citric acid-buffered mobile phases. A mathematical model fitted to this data gives model parameters that provide the basis for a window diagram of relative retentions vs. mobile phase pH. The window diagram gives an estimate of the mobile phase pH required for optimum separation.     

Catalysts for the living insertion polymerization of alkenes: access to new polyolefin architectures using Ziegler-Natta chemistry

Coordination-insertion polymerization systems have long been superior to their anionic, cationic, and radical polymerization counterparts with regard to stereochemical control. However, until five years ago, these metal-based insertion methods were inferior to ionic and radical mechanisms in the category of living polymerization, which is simply a polymerization that occurs with rapid initiation and negligible chain termination or transfer. In the last half decade, the living insertion polymerization of unactivated olefins has emerged as a powerful tool for the synthesis of new polymer architectures. Materials available today by this route range from simple homopolymers such as linear and branched polyethylene, to atactic or tactic poly(alpha-olefins), to end-functionalized polymers and block copolymers. This review article summarizes recent developments in this rapidly growing research area at the interface of synthetic and mechanistic organometallic chemistry, polymer chemistry, and materials science. While special emphasis is placed on polymer properties and novel polymeric architectures, most of which were inaccessible just a decade ago, important achievements with respect to ligand and catalyst design are also highlighted.