Rapid and sensitive trace gas detection with continuous wave Optical Parametric Oscillator-based Wavelength Modulation Spectroscopy

A fiber-amplified Distributed Bragg Reflector diode laser is used to pump a continuous wave, singly resonant Optical Parametric Oscillator (OPO). The output radiation covers the 3–4 μm with ability of rapid (100 THz/s) and broad mode-hop-free tuning (5 cm⁻¹). Wavelength Modulation Spectroscopy is combined with the OPO to take optimal advantage of the spectral scan speed. The sensitivity of the system was determined as 0.8 ppbv (parts-per-billion by volume) for ethane (C₂H₆) for the absorption peak at 2996.9 cm⁻¹ recorded in 1.3 seconds, corresponding to a noise equivalent absorption sensitivity (NEAS) of 1.2×10⁻⁹ cm⁻¹/Hz^1/2. A comparison between results using the 1^st, 2^nd and 4^th harmonic derivative signal from wavelength modulation was performed. The broad continuous tunability was demonstrated by covering 35 cm⁻¹ while recording absorption features of ethane, methane and water.     

Automatically tunable continuous-wave optical parametric oscillator for high-resolution spectroscopy and sensitive trace-gas detection

We present a high-power (2.75 W), broadly tunable (2.75–3.83 μm) continuous-wave optical parametric oscillator based on MgO-doped periodically poled lithium niobate. Automated tuning of the pump laser, etalon and crystal temperature results in a continuous wavelength coverage up to 450 cm^-1 per poling period at <5×10^-4 cm^-1 resolution. The versatility of the optical parametric oscillator as a coherent light source in trace-gas detection is demonstrated with photoacoustic and cavity ring-down spectroscopy. A 17-cm^-1-wide CO₂ spectrum at 2.8 μm and multi-component gas mixtures of methane, ethane and water in human breath were measured using photoacoustics. Methane (at 3.2 μm) and ethane (at 3.3 μm) were detected using cavity ring-down spectroscopy with detection limits of 0.16 and 0.07 parts per billion by volume, respectively. A recording of ¹²CH₄ and ¹³CH₄ isotopes of methane shows the ability to detect both species simultaneously at similar sensitivities. PACS 42.65.Yj; 42.72.Ai; 42.62.Fi     

Continuous‐wave optical parametric oscillator based infrared spectroscopy for sensitive molecular gas sensing

Over the past 10 years, with the advent of new crystals designs and a new generation of pump lasers, continuous‐wave (cw) optical parametric oscillators (OPOs) have developed into mature monochromatic light sources. Nowadays, cw OPOs can fulfill a wide variety of criteria for sensitive molecular gas sensing. It can access the mid‐infrared wavelength region, where many molecules have their fundamental rotational‐vibrational transitions, with high power. This high power combined with wide wavelength tuning and narrow linewidth creates excellent conditions for sensitive, high‐resolution spectroscopy. OPOs combined with robust methods, such as photoacoustic spectroscopy and cavity‐enhanced spectroscopy, are well suited for field measurements and remote‐sensing applications. The wide tunability of cw OPOs allows detection of larger molecules with broad absorption band structures, and its fast scanning capabilities allow rapid detection of trace gases, the latter is a demand for life‐science applications. After a short introduction about the physical principle of cw OPOs, with its most recent physical developments, this review focuses on sensitive molecular gas sensing with a variety of spectroscopic applications in atmospheric and life sciences.     

Analytical gradients of a state average MCSCF state and a state average diagnostic

An efficient method for calculating the Lagrange multipliers and the analytical gradients of one state included in a state average MCSCF wave function is presented. It is demonstrated that the state average energy of an ‘equal-weight’ scheme is invariant to rotations within the state average subspace and that the corresponding rotations should be eliminated from the Lagrangian equations. Finally, a diagnostic is presented, which gauges the energy difference between a state defined by a state average calculation and the corresponding fully variational multi-configurational SCF state.     

ChemInform Abstract: X-Ray Structural Studies of the Polymorphic Elpasolites K2LiAlF6 and Rb2LiGaF6.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Thermal effects in singly resonant continuous-wave optical parametric oscillators

Stability and tuning characteristics of continuous-wave optical parametric oscillators (CW OPOs) are affected by various thermal effects arising from optical absorption in nonlinear crystals. In this paper, we present an experimental study of such effects in a singly resonant CW OPO. The OPO operates in the 3-μm mid-infrared region and it is based on a MgO-doped periodically poled lithium niobate crystal. We focus our study on two thermally induced phenomena that have been recently reported to exist in singly resonant CW OPOs: optical bi-stability and thermal self-locking. Thermal self-locking effect, which is known to alter the stability and tuning properties of doubly and triply resonant CW OPOs, is shown to be also of importance in singly resonant OPOs. We report the stability and tuning characteristics of a thermally loaded OPO and discuss a simple temperature-tuning method that can be used to scan the OPO idler frequency continuously over several THz.     

CO-laser-based photoacoustic trace-gas detection: applications in postharvest physiology

2 measurements using polarographic oxygen sensors. Received: 13 March 1998/Revised version: 13 May 1998     

Structure and morphology of the reaction fronts during the formation of MgAl2O4 thin films by solid state reaction between R-cut sapphire substrates and MgO films

The thin-film spinel-forming solid state reaction between Al₂O₃ and MgO has been studied under initially non-coherent conditions. MgO films in (001) orientation on -cut sapphire single crystals were heated at 1100°C for 30 min or 1h. The film/substrate reaction proceeds via cation counterdiffusion as was revealed by a marker experiment. The MgAl₂O₄ films formed were predominantly (001) oriented, with an additional systematic tilt of about 5° of the spinel lattice around the [010] axis. The structure of the Al₂O₃ /MgAl₂O₄(001) and MgAl₂O₄(001)/MgO(001) reaction fronts has been investigated on cross section samples by high-resolution electron microscopy. It appeared that after starting from an incoherent interface, the Al₂O₃ /MgAl₂O₄(001) front assumes an almost fully coherent structure during the reaction. As a result the lattice misfit is reduced to 1%, and interfacial ledges are formed. The latter most probably play an active role in the necessary c.p.h. f.c.c. reconstruction of the oxygen sublattice. The MgAl₂O₄(001)/MgO(001) reaction front consists of coherent regions divided by misfit dislocations. During the reaction the former run ahead whereas the latter lag behind. As a result the morphology of the reaction front is bowed. The results confirm earlier observations of Carter and Schmalzried of the semicoherent Al₂O₃(00.1)/CoAl₂O₄(111) interface, thus strongly supporting the conclusion of a fundamental new phase transformation mechanism specific to oxide systems.Presented at the workshop on High-Voltage and High-Resolution Electron Microscopy, February 21–24, 1994, Stuttgart, Germany.