Kinetics of the photodissociation iodine laser with slow pumping

Systematic calculations of maximum inversion were performed for iodine photodissociation laser in dependence on the mixture composition. The flash-lamp radiation was modelled as emanating from an optically thin Xe plasma. Duration of the pumping pulse is about 300 s. The sensitivity of the model to the values of kinetic constants was also tested.     

Thermal analysis of anhydrous and hydrated Cholesterol

Cholesterol constitutes the major component of most gallstones. It was identified and determined, in gallstones, issued from eleven patients, by thermal analysis: differential scanning calorimetry (DSC), with the use of the melting temperature and enthalpy, thermogravimetry (TG), with the mass loss of water. Anhydrous cholesterol (ChA) was characterized by two endothermic peaks (polymorphic, melting) and cholesterol monohydrate (ChH) by two endothermic peaks (dehydration, melting), too. Cha needle and Chh plate crystals were observed under polarizing light microscopy. The numerous stones obtained from nine patients were cholesterol stones: the ChA was higher 45 and lower 96%. ChH was present in stones of three patients. This revised version was published online in July 2006 with corrections to the Cover Date.     

Counterion Exchange Selectivity in Detergent–Polymer Aggregates

In aqueous solution, the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene glycol) (PEG) results in the formation of small aggregates or clusters of SDS attached to the PEG polymer chain. Selectivity coefficients for exchange of two monovalent (N-methyl-4-cyanopyridinium cation and Tl⁺) and two divalent (methylviologen cation and Cu²⁺) counterions at the surface of SDS–PEG clusters, determined employing photophysical techniques, are similar, but not identical, to those for exchange at the surface of SDS micelles in the absence of PEG. The principal factor affecting ion exchange selectivity in SDS–PEG clusters does not appear to be aggregate size or surface charge density but rather the presence of poly(oxyethylene) subunits at the aggregate surface.     

On kinetics of the photodissociation iodine laser

The kinetics of iodine laser amplifiers is examined by solving the time evolution equations of chemical kinetics during optical pumping. The pumping radiation intensity is modelled by a black body of the temperature varying in time (corresponding to the flash lamp pulse). A brief comparison is made of pumping effects by long and short light pulses. Pumping by the long pulse is studied in more detail and it is found that there exists an optimum pulse strength beyond which the inversion in the laser mixture no longer grows appreciably, only its lifetime is shortened. In this connection the effect of pyrolysis of the alkyliodide molecule is also discussed. The pyrolysis is found to occur under very strong illumination, but it does not interfere with the photolytic decomposition and the optimum laser action. Finally, the influence of the reaction rate constants is studied in a systematic way and only few of them are found to carry real weight.The authors are obliged to Drs. S. V. Kuznetsova and A. I. Maslov who were consulted on the values of the reaction constants and who also drew our attention to some of the references.     

Über den Einfluß von Temperatur und Fremdionen auf Eigenschaften und Bau der Natriumwasserglaslösungen

The Influence of Temperature and Impurities Addition on the Properties and the Constitution of Sodium Water Glass Solutions Sodium water glass (NaWG-)solutions of constant composition (SiO₂/Na₂O = 3,3; C_SiO2 = 6,2 M) and different concentration of impurities (Fe, Al, Ti, Cu, chloride, sulfate) were investigated in dependence on temperature by means of the dye absorption method, ¹H- and ²³Na-NMR spectroscopy. It is shown, that the differences in the dye absorption spectra of normalized technical NaWG-solutions, mainly depend on the Fe-concentration in the solutions and their thermal history. From the results follow a crosslinking of polymeric silicate species by Fe? O? Si bonds and/or hydrogen bridges and a fully or partially degradation of these bonds at higher temperatures (150°C).     

Accurate values for the nonrelativistic energies of the lowest singlet and triplet S-states of the4He-Isotop

Accurate lower and upper bounds for the nonrelativistic lowest energies¹ E ₀ and³ E ₀ of the singlet and triplet-system of the⁴He-Isotop are calculated with the linearized method of variance minimization. The same was done for¹ E ₁ the energy of the first excitedS-state 2¹ S. The results especially for¹ E ₀ and³ E ₀ in a.u. are −2.9033076997₅ ≤¹ E ₀ ≤ −2.9033076921₈ −2.1749324263₇ ≤³ E ₀ ≤ −2.1749324245₉ i.e. the values are determined with an absolute error smaller than 0.00167 cm⁻¹ for¹ E ₀ and 0.00039 cm⁻¹ for³ E ₀.     

Counterion exchange selectivity coefficients at water-in-oil microemulsion interface

The counterion binding at a water/Aerosol-OT (AOT)/heptane microemulsion interface was treated in the context of the pseudo-phase ion exchange formalism. Two approaches were used to determine the selectivity coefficient for copper/sodium counterion binding at the AOT microemulsion interface: measurements of the Cu(II) concentration taken up by the reverse micelle in a Winsor II microemulsion system and steady-state emission quenching measurements of an anionic water-solubilized probe, the tris-(4,4'-dicarboxy-2,2'-bipyridine) ruthenium (II) ion. In addition, the selectivity coefficient for methyl viologen/sodium at the microemulsion surface was determined by the same photophysical technique. The value for copper (II)/sodium exchange (K(Cu/Na)) is 1.1+/-0.3 and that for methyl viologen/sodium (K(MV/Na)) is 0.9+/-0.3. The results show that the pseudo-phase ion exchange model can be used to obtain the selectivity coefficient in a microemulsion system.     

The use of thermal analysis in determination of some urinary calculi of calcium oxalate

The human urinary calculi are mainly constituted by calcium oxalate, magnesium ammonium phosphate hexahydrate, and uric acid. The ions or molecules are easily characterized by wet chemical methods. The difficulties appear in the differentiation of the hydrates of calcium oxalate (monohydrate COM or Whewellite, and dihydrate COD or Weddelite). A high level of COD in the urinary stones leads, often, inflammation, sharp pain and blood in urine. In the worse cases, they must be extracted by surgical way. The identification of the main components of urinary calculi, the knowledge of the true number of water molecules bounded to the calcium oxalate, and the determination of each hydrate in the mixture, are the interests of this memory. The thermal analysis (simultaneous DTA-TG) was applied on thirty-three urinary calculi. The determination of the calcium oxalate hydrates was confirmed by calorimetry (DSC). This revised version was published online in July 2006 with corrections to the Cover Date.