Ozonolysis of a Series of Methylated Alkenes: Reaction Rate Coefficients and Gas‐Phase Products

The gas‐phase ozonolysis of three methylated alkenes, i.e., trans‐2,2‐dimethyl‐3‐hexene (22dM3H), trans‐2,5‐dimethyl‐3‐hexene (25dM3H), and 4‐methyl‐1‐pentene (4M1P), has been investigated in the presence of sufficient hydroxyl radical scavenger in a laminar flow reactor at ambient temperature (296 ± 2 K) and P = 1 atm of dry air (RH ≤ 5%). Ozone levels in the reactor were monitored by an automatic analyzer. Alkene and gas‐phase product concentrations were determined via online sampling either on three‐bed adsorbent cartridges followed by thermodesorption and GC/FID‐MS analysis or on 2,4‐dinitrophenylhydrazine (DNPH) cartridges for subsequent HPLC/UV analysis. Reaction rate coefficients of (3.38 ± 0.12) × 10^?17 for 22dM3H and (2.71 ± 0.26) × 10^?17 for 25dM3H, both in cm³ molecule^?1 s^?1 units, have been obtained under pseudo–first‐order conditions. Primary carbonyl products have been identified for the three investigated alkenes, and branching ratios are reported. In the case of 4M1P ozonolysis, the yield of a Criegee intermediate was indirectly determined. Kinetics and product study results are compared to those of literature when available. This work represents the first investigation of reaction products in the ozonolysis of 22dM3H, 25dM3H, and 4M1P in a flow reactor.     

Stopping rule for variable selection using stepwise discriminant analysis

Summary In general, when characterizing samples, such as ceramic samples or other types of samples, for first time by means of chemical elements, the analyst measures a large number of variables, many of which may not be very informative. In fact, some may even be unrelated to the issue at hand and blur the picture instead of making it clearer. In subsequent studies the analyst may wish to measure fewer variables for several reasons, such as being very time consuming; in cases where measurement time is important, such as on-line monitoring; in order to reduce cost or effort; etc. Therefore, the hope is to determine those variables that are most relevant without losing essential information and to remove the less productive information. The problem is how to perform this in an objective way and to capture crucial information using a multivariate analysis. This paper aims to describe and illustrate a stopping rule for the identification of redundant variables, and the selection of variable subsets, preserving multivariate data structure using stepwise discriminant analysis, selecting those variables that are in some senses adequate for discrimination purposes. One illustrative example using data sets obtained via INAA of ceramic samples from two archaeological sites is provided.     

Absolute rate calculations: atom and proton transfers in hydrogen-bonded systems.

We calculate energy barriers of atom- and proton-transfer reactions in hydrogen-bonded complexes in the gas phase. Our calculations do not involve adjustable parameters and are based on bond-dissociation energies, ionization potentials, electron affinities, bond lengths, and vibration frequencies of the reactive bonds. The calculated barriers are in agreement with experimental data and high-level ab initio calculations. We relate the height of the barrier with the molecular properties of the reactants and complexes. The structure of complexes with strong hydrogen bonds approaches that of the transition state, and substantially reduces the barrier height. We calculate the hydrogen-abstraction rates in H-bonded systems using the transition-state theory with the semiclassical correction for tunneling, and show that they are in excellent agreement with the experimental data. H-bonding leads to an increase in tunneling corrections at room temperature.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Determination de la structure de perfluoroalcenes a chaines longues par R.M.N. du19F : lère Partie : pefluoroalcenes-1

After a review of 1-perfluoroalkene R_FCFCF₂ synthesis, with R_FC₄F₉, C₅F₁₁, C₆F₁₃, we have studied their fine structures by ¹⁹F N.M.R. This study has led us to first generalize the rules set for the chemical shifts and coupling constants of olefinic fluorine atoms of fluoropropene and their derivatives. Then, we have been able to determinate unambiguously the chemical shifts of the difluoromethylene groups of the perfluorinated chains. We have thus shown, by irradiation, that inversions may take place in the chemical shifts of the CF₂ groups at the β and γ position of the double bond.     

Thioacylation reactions for the surface functionalization of phosphorus-containing dendrimers

The functionalization of phosphorus-containing dendrimers was easily achieved through thioacylation reactions involving new dendrimers capped with dithioester end groups and various functionalized amines. These reactions were successfully applied to the first generation (12 end groups) and the third generation of the dendrimer (48 end groups) and allowed their functionalization by various primary or secondary amines, alcohols, glycols, and azides. [reaction: see text]     

Preparation d'alcools acetyleniques et propargyliques F-alkyles

A number of α-β acetylenic carbinols R_FCCC(OH)RR′, in which the acetylenic proton was substituted by a F-alkyl group, were first prepared, from a classical reaction of (F-alkynyl)- lithium derivatives R_FCCLi upon various carbonyl compounds.On another hand, the reaction of propargyl bromide metallic complexes (organoaluminic, or ultrasonic irradiation activated organozinc) upon some polyfluorinated ketones R_FCOR led to the formation, in convenient yields, of the propargylic carbinols HCCCH₂C(OH)RR_F.The synthesis and properties of these series of new (F-alkyl) substituted acetylenic and propargylic alcohols are described and discussed.     

Mass spectrometric analysis of porcine rhodopsin

Rhodopsin is the dim light photosensitive pigment of animals. In this work, we undertook to study the structure of rhodopsin from swine and compare it with bovine and rat rhodopsin. Porcine rhodopsin was analyzed using methodology developed previously for mass spectrometric analysis of integral membrane proteins. Combining efficient protein cleavage and high performance liquid chromatography separation with the sensitivity of mass spectrometry (MS), this technique allows the observation of the full protein map and the posttranslational modifications of the protein in a single experiment. The rhodopsin protein from a single porcine eye was sequenced completely, with the exception of two single-amino acid fragments and one two-amino acid fragment, and the gene sequence reported previously was confirmed. The posttranslational modifications, similar to the ones reported previously for bovine and rat rhodopsin, were also identified. Although porcine rhodopsin has a high degree of homology to bovine and rat rhodopsins and most of their posttranslational modifications are identical, the glycosylation and phosphorylation patterns observed were different. These results show that rhodopsin from a single porcine eye can be characterized completely by MS. This technology opens the possibility of rhodopsin structural and functional studies aided by powerful mass spectrometric analysis, using the fellow eye as an internal control.     

Asymmetric Synthesis. 39.(1) Synthesis of 2-(1-Aminoalkyl)piperidines via 2-Cyano-6-phenyl Oxazolopiperidine

The asymmetric synthesis of a series of 2-(1-aminoalkyl) piperidines using (-)-2-cyano-6-phenyloxazolopiperidine 1 is described. LiAlH(4) reduction of 1 followed by hydrogenolysis led to the diamine 3. The same strategy applied to C-2-methylated compound 7 afforded [(2S)-2-methylpiperidin-2-yl]methanamine (9). Addition of lithium derivatives to the cyano group of 1 resulted in the formation of an intermediate imino bicyclic system (11a-c) which could be diastereoselectively reduced to substituted diamino alcohols 13a-c. The addition of an excess of PhLi to 1 in the presence of LiBr furnished disubstituted amine 19, the precursor of diphenyl[(2S)-piperidin-2-yl]methanamine (22).     

An electron transfer approach to the preparation of highly functionalized anthraquinones

A series of highly functionalized quinones was prepared by an original reaction of 2,3-bis(chloromethyl)-1,4-dimethoxyanthraquinone (6) with various nitronate anions under electron transfer reaction conditions.