Approche non paramétrique du filtrage de système non linéaire à temps discret et à paramètres inconnus

Particle filters are presently among the most powerful tools for filtering discrete time non linear systems. However the presence of unknown parameters in the system equations makes their use more complex and can even impair their convergence properties. This Note shows how an on-line consistent estimation of these parameters can be obtained simultaneously to that of the state variables to be filtered. This approach relies upon a kernel-based non parametric estimation of conditional probability densities from successive Monte Carlo generations of system particles. To cite this article: V. Rossi, J.-P. Vila, C. R. Acad. Sci. Paris, Ser. I 340 (2005).     

Carbon fiber cylindrical microelectrode-based detector for the determination of antithyroid drugs

An amperometric flow-injection method for the determination of antithyroid drugs such as 6-methyl-2-thiouracil (MTU) using a carbon fiber cylindrical microelectrode-based detector is reported. A home-made flow-cell specially adapted for working with cylindrical microelectrodes ranging between 4 and 10 mm in length was used for this purpose. Methanol containing 0.05 mol l(-1) tetrabutylammonium perchlorate as the supporting electrolyte was employed, and a potential of +1.6 V was selected for the amperometric detection of MTU. No cleaning or electrode surface regeneration of the fiber was necessary during the whole working day. A limit of detection of 2.6x10(-7) mol l(-1) (37 mug MTU l(-1)) was achieved. The method was applied to the determination of MTU in spiked feed samples (peas and corn flour), at the 142 mug g(-1) level. The procedure involved the extraction of the drug in methanol, a clean-up step using Florisil cartridges and the use of the standard additions method. Recoveries of 81+/-6 and 85+/-8% were obtained for peas and corn flour, respectively.     

Quantitative analysis of bilobalide and ginkgolides from Ginkgo biloba leaves and Ginkgo products using (1)H-NMR

1H-NMR spectrometry was applied to the quantitative analysis of the bilobalide, ginkgolides A, B, and C in Ginkgo biloba leaves and six kinds of commercial Ginkgo products without any chromatographic purification. The experiment was performed by the analysis of each singlet H-12, which were well separated in the range of delta 6.0-7.0 in the (1)H-NMR spectrum. However, the H-12 protons of bilobalide and ginkgolides may have overlapped with H-6 or H-8 protons of the Ginkgo flavonoids. Therefore, the optimum (1)H-NMR solvent for the analysis of the compound was selected through the evaluation of solvent effects on the resolution of these signals from the compounds. Acetone-d(6)-benzene-d(6) (50 : 50) was found to be the best one among the solvents evaluated. The quantity of the compounds was calculated by the relative ratio of the intensity of each compound to the known amount of internal standard (25 microgram), phloroglucinol. This method allows rapid and simple quantitation of underivatized bilobalide and ginkgolides in 5 min without any pre-purification steps.     

Stereoselective synthesis of trans-2,3-disubstituted pyrrolidines via addition to N-acyliminium ions

An efficient and stereoselective synthesis of trans-2,3-disubstituted pyrrolidines is described. The intermolecular alkylation of racemic N-acyliminium ions generated in situ from the corresponding 3-substituted lactams proceeds stereoselectively and in high yield.     

Ethanol production from steam-explosion pretreated wheat straw

Bioconversion of cereal straw to bioethanol is becoming an attractive alternative to conventional fuel ethanol production from grains. In this work, the best operational conditions for steam-explosion pretreatment of wheat straw for ethanol production by a simultaneous saccharification and fermentation process were studied, using diluted acid [H₂SO₄ 0.9% (w/w)] and water as preimpregnation agents. Acid-or water-impregnated biomass was steam-exploded at different temperatures (160–200°C) and residence times (5, 10, and 20 min). Composition of solid and filtrate obtained after pretreatment, enzymatic digestibility and ethanol production of pretreated wheat straw at different experimental conditions was analyzed. The best pretreatment conditions to obtain high conversion yield to ethanol (approx 80% of theoretical) of cellulose-rich residue after steam-explosion were 190°C and 10 min or 200°C and 5 min, in acid-impregnated straw. However, 180°C for 10 min in acid-impregnated biomass provided the highest ethanol yield referred to raw material (140 L/t wheat straw), and sugars recovery yield in the filtrate (300 g/kg wheat straw).     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

Cyclometallation of phenylhydrazones: Synthesis, reactivity, crystal structure analysis and novel trinuclear palladium(II) cyclometallated compounds with [C, N, N′] terdentate ligands

Reaction of the ligand C₆H₅N(H)NCMe(C₅H₄N) (a) with palladium(II) acetate in toluene gave the mononuclear cyclometallated complex [Pd{C₆H₄N(H)NCMe(C₅H₄N)}(AcO)] (1a). Reaction of 1a with sodium chloride gave the analogous chlorine compound [Pd{C₆H₄N(H)NCMe(C₅H₄N)}(Cl)] (3a) which could also be prepared by reaction of a with lithium tetrachloropalladate and sodium acetate in methanol for 48 h; whereas shorter reaction times afforded the non-cyclometallated complex [Pd{C₆H₅N(H)NCMe(C₅H₄N)}(Cl)₂] (2a). Reaction of the ligand 2-ClC₆H₄N(H)NCMe(C₅H₄N) · HCl (b), with palladium(II) acetate, or with lithium tetrachloropalladate and sodium acetate, yielded the cyclometallated complex [Pd2-ClC₆H₃N(H)NCMe(C₅H₄N)(Cl)] (1b). Treatment of 3a and 1b with silver trifluoromethanesulphonate (triflate) and triphenylphosphine in acetone gave the mononuclear complexes [Pd{2-RC₆H_nN(H)NCMe(C₅H₄N)}(PPh₃)][CF₃SO₃], (R = H, n = 4, 4a; R = Cl, n = 3, 2b) with the ligand as C,N,N′ terdentate and substitution of chlorine by triphenylphosphine. Reaction of 3a and 1b with silver triflate and the tertiary diphosphine Ph₂P(CH₂)₄PPh₂ (dppb) in a 2:1 molar ratio gave the dinuclear cyclometallated complexes [{Pd[2-RC₆H₃N(H)NCMe(C₅H₄N)]}₂(μ-Ph₂P(CH₂)₄PPh₂)][CF₃SO₃]₂ (R = H, 5a; R = Cl, 3b) with a μ₂-diphosphine bridging ligand. Similarly, treatment of 3a and 1b with silver triflate and the tertiary triphosphines MeC(CH₂PPh₂)₃ (tripod) and (Ph₂PCH₂CH₂)₂PPh (triphos), in 3:1 molar ratio, gave the novel trinuclear complexes [{Pd[C₆H₄N(H)NCMe(C₅H₄N)]}₃{μ₃-MeC(CH₂Ph₂)₃}][CF₃SO₃]₃ (6a) and [{Pd[2-ClC₆H₃N(H)NCMe(C₅H₄N)]}₃{μ₃-(PPh₂CH₂CH₂)₂PPh}][CF₃SO₃] ₃ (4b) regioselectively, with the phosphine as a μ₃-bridging ligand. When the reaction between 3a and triphos was carried out in 1:1 molar ratio the mononuclear complex [Pd{C₆H₄N(H)NCMe(C₅H₄N)}{(PPh₂CH₂CH₂)₂PPh-P,P,P}][ClO₄] (7a) was obtained. The crystal structures of 2b, 3a and 4a have been determined by X-ray crystallography.     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.