Lattice Monte Carlo simulations of three-dimensional charged polymer chains. II. Added salt

The configurational properties of strongly charged polyelectrolytes accompanied by counterions and salt ions in dilute solutions are simulated using the cooperative motion algorithm on the face-centered-cubic lattice. The calculations indicate that both positive and negative ions condense on the chains at sufficiently low temperatures and their amount depends on the concentration of added salt. As the temperature decreases from high to low, the chains undergo conformational changes from neutral-like, self-avoiding polymers by more outstretched forms to compact globules. The observed extension of the chains at intermediate temperatures is also affected by the amount of salt. Furthermore, configurations with the lowest energies recorded at the lowest temperatures are aggregates of single or more entangled chains and ions of both types.     

Light absorption in laser-heated cavities

The absorption of laser light in 0.25–1 mm diameter gold cavities, irradiated for the purpose of generating high-temperature blackbody radiation with intense laser radiation of either =0.44 m or =1.3 m wavelength, was investigated. For =0.44 m radiation the absorption exceeded 0.9 for all conditions, but dropped to only 0.3 for the smallest cavities irradiated at =1.3 m. Entrance hole and cavity filling with plasma seems important for the understanding of the observations.     

Temperature stresses in plates made of reinforced laminated material

The heat conduction equations and the basic equations of the quasi-static axisymmetric problem of thermoelasticity are obtained for thin plates with heat transfer and cylindrical anisotropy. The nonsteady temperature stresses are determined for an infinite plate with a circular opening and an annular plate, both made of reinforced laminated material.Physicomechanical Institute, Academy of Sciences of the Ukrainian SSR, L'vov. Translated from Mekhanika Polimerov, No. 4, pp. 721–726, July–August, 1970.     

Molecular dynamics of cyclic and linear poly(dimethylsiloxanes)

Dielectric spectroscopy (10^–1 Hz to 10⁷ Hz) has been employed to study the molecular dynamics of a series of cyclic and linear polydimethylsiloxanes (PDMS) of various molecular weights ranging from 300 to 10 000 g/mol in the temperature range above the glass transition (from 130 K to 190 K). The observed -relaxation depends strongly on both molecular weight and structure of the samples. For linear PDMS oligomers, the -relaxation shifts towards lower temperatures with decreasing molecular weight in good accordance with the Fox-Flory-model. Cyclic PDMS reveals a qualitatively different molecular weight dependence: for a given temperature the -relaxation time increases with decreasing ring length, but has a maximum for small oligomers (degree of polymerizationn6). The shape of relaxation curves and, with it, the relaxation time distribution is independent from length and architecture of the chains The observed experimental findings are in qualitative agreement with dynamic Monte-Carlo simulations.Dedicated to Prof. E.W. Fischer on the occasion of his 65th birthday Fast macht' das WLF ihn krank, jetzt raucht er wieder, Gott sei Dank! (frei nach Wilhelm Busch)     

Equilibrium interaction of solid surfaces across a polymer melt

Forces across polymer melts are poorly understood despite their importance for adhesion and fabricating composite materials. Using an atomic force microscope (AFM), this interaction was measured for poly(dimethyl siloxane) (PDMS). The structure of the polymer at the surface changed during the first approximately 10 h. Afterward, short-range attractive forces were observed with short-chain PDMS (M(w) = 4200 g/mol). Using PDMS with a molecular weight (M(w) = 18 000 g/mol) above the entanglement limit, we measured a monotonically decaying repulsive force, which indicates that a quasi-immobilized layer had formed at the solid surface. Due to the small radius of curvature of the tip, forces could be measured in equilibrium.     

Behavior of evaporating droplets at nonsoluble and soluble surfaces: Modeling with molecular resolution

Liquid droplets in equilibrium with vapor are simulated at solidlike surfaces using the cooperative motion algorithm (CMA). These droplets behave like real droplets, i.e., the densities of the coexistent liquid and vapor phases obey empirical relations such as rho l - rho v proportional, variant (1 - T/Tc)(1/3). Droplet evaporation was studied under various interaction conditions, i.e., nonsoluble and soluble substrates. In the last case, substrate particles migrate toward the liquid-vapor interface to minimize the droplet surface energy. This leads to the formation of a microwell surrounded by a ringlike deposit on the substrate surface. It is shown that the ring formation in the first stages of evaporation results in pinning of the droplet contact area.     

Self-assembly of electron donor-acceptor dyads into ordered architectures in two and three dimensions: surface patterning and columnar "double cables"

We report the synthesis and characterization of covalent dyads and multiads of electron acceptors (A) and donors (D), with the purpose of exploiting their nanophase separation behavior toward (a) two-dimensional (2D) surface patterning with well-defined integrated arrays of dissimilar molecular electronic features and (b) bulk self-assembly to noncovalent columnar versions of the so-called "double cable" systems, the likes of which could eventually provide side-by-side percolation pathways for electrons and holes in solar cells. Soluble, alkylated hexa-peri-hexabenzocoronenes (HBCs) bearing tethered anthraquinones (AQs) are shown by scanning tunneling microscopy (STM) to self-assemble at the solution-graphite interface into either defect-rich polycrystalline monolayers or extended 2D crystalline domains, depending on the number of tethered AQs. In the bulk, the thermal stability of the room-temperature HBC columnar phase is increased, which is attributed to the desired nanotriphase separation of HBC columns, insulating alkyl sheaths, and AQ units. Homeotropic alignment (columns normal to surfaces), predicted to be ideal for potential exploitation of such "double cables" in photovoltaic devices, is demonstrated.     

Lattice Monte Carlo simulations of three-dimensional charged polymer chains

The configurational properties of strongly charged polyelectrolytes accompanied by neutralizing counterions in dilute solutions are simulated using the cooperative motion algorithm on the face-centered-cubic lattice. The full Coulomb potential and the excluded volume condition between different ions/beads are taken into account and the reduced temperature T* is considered the main, variable parameter. The calculations that have been carried out for solutions of both single and several chains indicate a few regions of their behavior: (1) for T*--> infinity, it corresponds to that of neutral, self-avoiding polymers under good solvent conditions; (2) for T* approximately 1, due to the electrostatic interactions being effectively stronger, the chains are more outstretched compared to their size at other temperatures; (3) for T* well below one, the counterion condensation becomes more and more dominant, which gradually leads to strongly collapsed chains; and (4) at the lowest temperatures the chains and counterions assume low-energy configurations in the form of neutral, compact aggregates.     

Light-scattering study of a supercooled epoxy resin

The dynamics of the fragile glass-forming liquid diglycidyl ether of bisphenol-A was studied by depolarized Rayleigh-Brillouin light-scattering and photon correlation spectroscopy above the glass transition, in the temperature range from 261 to 473 K and in the frequency range from 1 Hz to 300 GHz. The structural (alpha-) relaxation process was revealed and no signature of the secondary relaxation previously evidenced by dielectric spectroscopy at about 0.1 GHz was observed. The characteristic time of the alpha process differs from that determined by dielectric spectroscopy of an amount, which increases with increasing temperature. The relaxation times were compared with viscosity data to test the predictions of the classic Stokes-Einstein-Debye model. The tau proportional, variant eta behavior was verified for dielectric data, while a fractional power law of viscosity tau proportional, variant eta(0.89) was obtained for light-scattering relaxation times, extending over more than seven decades in viscosity and time. This deviation of light scattering from viscosity data could be interpreted in terms of cooperative motion in the supercooled liquid with a characteristic length xi(a) proportional, variant(T-T0)(-v) where T(0)=229 K is the Vogel temperature and v is close to 2 / 3 which is consistent with the prediction of the fluctuation theory of glass transition.     

Exceptionally long-range self-assembly of hexa-peri-hexabenzocoronene with dove-tailed alkyl substituents

The substitution of a hexa-peri-hexabenzocoronene by bulky, space-demanding, 2-decyltetradecyl side chains proved to be an effective procedure to influence the thermal and self-aggregation behavior. The extremely large steric requirement of the introduced side chains modulated the aggregation and resulted in a dramatic lowering of the isotropization temperature and a higher solubility. As an additional consequence of the exceptional, long-range self-aggregation of the discotic molecule, spherulite formation was observed during crystallization by polarized light microscopy. Macroscopic self-assembly was induced by zone crystallization of the material, leading to aligned columnar superstructures as revealed by 2D-WAXS experiments. These extraordinary properties have not yet been reported for a discotic columnar material, making this compound very promising for application in electronic devices.