Determination of melengestrol acetate in bovine tissues by automated coupled-column normal-phase high-performance liquid chromatography

A method has been developed for the determination of melengestrol acetate in bovine tissues at lower levels than previously reported. Liquid-liquid extraction of tissue homogenates provided crude clean-up while final isolation, screening, and quantification was done on-line with an automated, normal-phase, coupled-column high-performance liquid chromatographic system. The chromatographic system included phenyl and silica analytical columns for the purposes of isolation and final separation, respectively. These columns provided a large difference in selectivity when operated under normal-phase conditions which allowed for the efficient isolation of melengestrol acetate from the complex tissue extracts. Mobile phases were composed of hexane and dichloromethane modified with methanol and water. Transfer and enrichment of the analyte from the primary phenyl column to the silica column was via a short (12 mm x 4 mm I.D.) silica column. Regeneration and equilibration of the phenyl column was performed after the injection of each tissue extract and was accomplished simultaneously while analytical separation occurred on the final silica column. Routing of the mobile phases and regeneration solvent was performed with automated switching valves. The total time required for each analysis was 12 min. Quantification is demonstrated using external standards with UV detection at 287 nm. The overall recovery of the method was 86% with a coefficient of variation of 9.84% at the 10 ppb [the American billion (10(9] is used in this article] level in bovine liver extracts.     

Four levels of pattern recognition

Problems of pattern recognition in chemistry and other subjects can be divided conveniently into four different types depending on the level of scope of the problem.(1) Classification into one of a number of defined classes. As an example blood samples taken from persons known to be either controls or welders are considered. The problem is whether trace element concentrations in these samples contain information on whether or not a person is a welder.(2) Level 1 plus the possibility that an object is an outlier, i.e. does not belong to any of the defined classes. As an example, the üse of ¹³C-n.m.r. data to decide whether 2-substituted norbornanes have the exo or endo structure is discussed. (2A) Level 2, asymmetric. This situation occurs when one class does not have a systematic structure, but another class is homogeneous and can be described by a level 2 model. This occurs in the classification of materials or compounds as good or bad, active or inactive, and in binary classifications. As an example the use of trace element data to classify steel samples as having good or poor properties of strength is discussed.(3) Level 2 plus the ability to relate the variables measured to external properties of continuous character. As an example, the classification of a series of chemical compounds as β -receptor blockers, β -receptor stimulants, or neither, on the basis of their structural variables is discussed. In addition, relations between these structural variables and the measured biological activity are sought within each of the two classes.(4) Level 3 with the difference that several external property variables in the objects are measured. It may be desirable to use variables of the objects both for classification and for relations to several property variables: such examples are numerous in analytical chemistry.     

Detection of trace amounts of Ni by laser-induced fluorescence in graphite furnace with intensified charge coupled device

A laser-induced fluorescence in graphite furnace (LIF-GF) set-up has been equipped with an intensified CCD detector (ICCD) that enables simultaneous multichannel detection of large wavelength regions. The main advantages of such a system in comparison with conventional photomultiplier detection are: simultaneous detection of several fluorescence wavelengths for easy characterization of excitation and fluorescence spectra and for an increase of the absolute sensitivity and spectral selectivity; simultaneous monitoring of background signals, such as those due to matrix interferences, blackbody radiation and scattered laser light; decrease of the susceptibility to radio-frequency pick-ups emitted from the pump laser due to the delayed read-out procedure; time-resolved studies of fluorescence spectra for improved elemental selectivity or for studies of atomization processes, and a possibility to perform two-dimensional imaging of height distributions of atomization and, in combination with an imaging spectrometer, diffusion processes in the furnace. The first work on LIF-GF with ICCD detection has been performed on Ni. The most sensitive and versatile excitation and detection wavelengths have been identified. Detection limits in water solutions by the LIF-GF technique have been improved by two orders of magnitude and are found to be 0.015 pg with ICCD and 0.01 pg using a photomultiplier at the most sensitive excitation and detection wavelengths. Nickel in concentrations has been detected in aqueous standard reference samples with sodium concentrations ranging from to % (riverine water and estuarine water) with good accuracy and precision. The Ni contents of standard riverine and estuarine water were determined to 1.00 ± 0.11 and 0.75 ± 0.07 ng/ml, respectively. The certified concentrations are 1.03 ± 0.10 and 0.743 ± 0.078 .     

Muffin-tin orbital Wannier-like functions for insulators and metals.

Herein, we outline a method that is able to generate truly minimal basis sets that accurately describe either a group of bands, a band, or even just the occupied part of a band. These basis sets are the so-called NMTOs, muffin-tin orbitals of order N. For an isolated set of bands, symmetrical orthonormalization of the NMTOs yields a set of Wannier functions that are atom-centered and localized by construction. They are not necessarily maximally localized, but may be transformed into those Wannier functions. For bands that overlap others, Wannier-like functions can be generated. It is shown that NMTOs give a chemical understanding of an extended system. In particular, orbitals for the pi and sigma bands in an insulator, boron nitride, and a semimetal, graphite, will be considered. In addition, we illustrate that it is possible to obtain Wannier-like functions for only the occupied states in a metallic system by generating NMTOs for cesium. Finally, we visualize the pressure-induced s-->d transition.     

Vibrational coupled cluster theory

The theory and first implementation of a vibrational coupled cluster (VCC) method for calculations of the vibrational structure of molecules is presented. Different methods for introducing approximate VCC methods are discussed including truncation according to a maximum number of simultaneous mode excitations as well as an interaction space order concept is introduced. The theory is tested on calculation of anharmonic frequencies for a three-mode model system and a formaldehyde quartic force field. The VCC method is compared to vibrational self-consistent-field, vibrational M?ller-Plesset perturbation theory, and vibrational configuration interaction (VCI). A VCC calculation typically gives higher accuracy than a corresponding VCI calculation with the same number of parameters and the same formal operation count.     

Combinatorial synthesis of benztropine libraries and their evaluation as monoamine transporter inhibitors

A combinatorial synthesis of benztropine analogues is presented. Radical azidonation of 3-benzyloxy-8-azabicyclo[3.2.1]octane-8-carboxylic acid tert-butyl ester 3 to 3-(1-azidobenzyloxy)-8-azabicyclo[3.2.1]octane-8-carboxylic acid tert-butyl ester 4 was used as a key step in the synthesis. This step was optimized by adding 10% DMF to the reaction. Reaction of 4 with phenyl magnesium bromide followed by Boc removal and N-methylation gave benztropine 1. Reaction of five-component Grignard reagents with 4 was used to create a two-dimensional library of 25 N-normethylbenztropine analogues. Further reaction of this library with five alkyl bromides was carried out to create a three-dimensional library containing 125 compounds. Screening of the libraries towards binding and inhibition of uptake of the human dopamine (hDAT), serotonin (hSERT) and norepinephrine transporters (hNET) was carried out. None of the synthesized compounds were found to be stronger than benztropine, and none were selective for inhibition of binding over monoamine uptake.     

Syntheses,structures and magnetic properties of Mn(II) containing 3D polymeric networks

Two novel 3D coordination polymers {[Mn(aip)(DMF)]}_n, CPO-9, and {[Mn₃(Hatp)₂(atp)₂](H₂O)₂(DEF)₄}_n CPO-10 (aip = 5-aminoisophthalate, atp = 2-aminoterephthalate, DMF = dimethylformamide, DEF = diethylformamide) have been synthesized by solvothermal methods. Their properties have been studied by single-crystal X-ray diffraction, thermogravimetric analysis, high-temperature powder X-ray diffraction and magnetic susceptibility measurements. The crystal structure of CPO-9 is based on infinite chains of carboxylato-bridged five-coordinated Mn(II) ions that are crosslinked via the aip ligands to form a 3D structure. CPO-10 is based on linear trinuclear building units of carboxylato-bridged octahedral Mn(II) ions that are crosslinked by the atp ligands into a 3D structure. Both compounds have 1D channels that contain solvent molecules. The solvent accessible void volume for CPO-10 is 51.9% of the unit cell volume. For both compounds, however, the solvent molecules cannot be removed without the collapse of the structures into amorphous phases at 250 °C. The magnetic susceptibility measurements indicate antiferromagnetic couplings between the Mn(II) ions in both compounds. The magnetic data have been fitted using theoretical approaches.     

Organically pillared layered zinc hydroxides

The two organically pillared layered zinc hydroxides [Zn₂(OH)₂(ndc)], CPO-6, and [Zn₃(OH)₄(bpdc)], CPO-7, were obtained in hydrothermal reactions between 2,6-naphthalenedicarboxylic acid (ndc) and zinc nitrate (CPO-6) and 4,4′biphenyldicarboxylate (bpdc) and zinc nitrate (CPO-7), respectively. In CPO-6, the tetrahedral zinc atoms are connected by two μ₂-OH groups and two carboxylate oxygen atoms, forming infinite layers extending parallel to the bc-plane. These layers are pillared by ndc to form a three-dimensional structure. In CPO-7, the zinc hydroxide layers are containing four-, five- and six coordinated zinc atoms, and the layers are built like stairways running along the [001] direction. Each step is composed of three infinite chains running in the [010] direction. Both crystal structures were solved from conventional single crystal data. Crystal data for CPO-6: Monoclinic space group P2₁/c (No. 14), a=11.9703(7), b=7.8154(5), c=6.2428(4) Å, β=90.816(2)°, V=583.97(6) Å³ and Z=4. Crystal data for CPO-7: Monoclinic space group C2/c (No. 15), a=35.220(4), b=6.2658(8), c=14.8888(17) Å, β=112.580(4)°, V=3033.8(6) Å³ and Z=8. The compounds were further characterized by thermogravimetric- and chemical analysis.     

The temperature dependence of the zero-field splitting of trimethylenemethane

Trimethylenemethane was generated by γ-irradiating polycrystalline methylenecyclopropane, and studied by EPR at various temperatures. The zero-field splitting constant, D, was observed to change from 0.0260 cm^?1 at 4 K to 0.0212 cm^?1 at 126 K, though the hyperfine coupling showed little temperature dependence.     

Synthesis and in vitro degradation of poly(N‐vinyl‐2‐pyrrolidone)‐based graft copolymers for biomedical applications

This work is devoted to the design of a novel family of hydrosoluble biomaterials: poly(N‐vinyl‐2‐pyrrolidone) (PVP)‐based graft copolymers. A synthesis route has been elaborated in which ω‐functionalized PVP is prepared via chain‐transfer radical polymerization, end‐group modified, and subsequently grafted onto a polyhydroxylated backbone, typically dextran or poly(vinyl alcohol). The resulting graft copolymer biomaterials are designed for use in various biomedical applications, particularly as materials with a stronger potential for plasma expansion than already existing products have. The graft copolymers are potentially degradable because the PVP grafts are connected to the polyol backbone via a hydrolytically labile carbonate or ester linkage. The degradation of the graft copolymers was performed in vitro over a period of 6 weeks. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3652–3661, 2002