Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Photodegradation behavior of tert-butyl vinyl ketone polymers and copolymers with styrene and α-methylstyrene

Photodegradation behavior of atactic and isotactic polymers of tert-butyl vinyl ketone (t-BVK) and its copolymers with styrene and α-methylstyrene was studied in dioxane as a solvent at room temperature. The quantum yield of main-chain scission of atactic poly(t-BVK) was found to be larger than that of isotactic poly(t-BVK) and atactic poly(methyl vinyl ketone). From the Stern-Volmer plots on the quenching study of atactic poly(t-BVK) with naphthalene and 2,5-dimethyl-2,4-hexadiene, it was found that 60–70% of its photochemical reaction underwent main-chain scission from the triplet state. It was also found that the increase in t-BVK contents of both copolymers accelerated the photodegradation, and the copolymer with styrene was more photodegradable than that with α-methylstyrene. These results seemed to suggest that the main-chain scission of these vinyl ketone polymers and copolymers proceeded through a Norrish type II photoelimination mechanism.     

Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

Effects of ortho-substituents on reactivities,tacticities, and ceiling temperatures of radical polymerizations of phenyl methacrylates

Radical polymerization and copolymerization of some o-alkylphenyl methacrylates were carried out and the effect of the ortho-substituents on the ability to homopolymerize, on the monomer reactivities, and on the ceiling temperatures of the monomers was studied. The effect of the substituent on tacticities and thermal stabilities of the polymers formed was also discussed. The ability to honiopolymerize and the monomer reactivity were considerably decreased by the introduction of the o-substituent. 2,6-Di-tert-butylphenyl methacrylate formed no methanol-insoluble polymer at 60°C. On the basis of the tacticity determined it was noted that the o-substituted phenyl methacrylates preferred syndiotactic addition in the propagation reaction less than did phenyl methacrylate or methyl methacrylate. The polymers formed from the o-substituted monomers were thermally less stable than poly(phenyl methacrylate), and, consistent with this finding, ceiling temperatures of the o-substituted phenyl methacrylates seemed to be lower than that of phenyl methacrylate. The effects observed were characteristic of the o-substituents conformationally close to the carbon-carbon double bond of the monomer or the carbon carrying the unpaired electron of the polymer radical.     

Monomer-isomerization polymerization. XX. Monomer-isomerization polymerization of 2-, 3-, and 4-octenes with Ziegler–Natta catalyst

A study of the monomer isomerization polymerization of 2-, 3-, and 4-octenes has been made with TiCl₃–(C₂H₅)₃Al catalyst at 80°C in comparison with the ordinary polymerization of 1-octene. It was found that all these octenes underwent monomer-isomerization polymerization to give high-molecular-weight homopolymer consisting exclusively of the 1-octene unit. The addition of an isomerization catalyst such as nickel acetylacetonate accelerated this polymerization. The rates of polymerization were found to decrease in the following order: 1-octene > 2-octene > 3-octene > 4-octene. These results indicate that the isomerization proceeded by a stepwise double-bond migration. It was also found that the monomer-isomerization copolymerization of 2-octene and 2-butene occurred under similar conditions and produced copolymers of both 1-olefin units.     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Vinyl polymerization. 179. Effects of substituents on chain transfer reaction of substituted cumenes toward poly(methyl methacrylate) radical

In order to study the effects of substituents on the chain transfer reaction to cumenes, the polymerization of methyl methacrylate in a series of nuclear-substituted cumenes with α,α′-azobisisobutyronitrile as initiator was carried out at 60°C. and the chain transfer constants C were determined. The C values obtained for all substituted cumenes were greater than that (C₀) for unsubstituted cumene, regardless of the electronattracting or -repelling nature of the substituents. Hence the plot of log (C/C₀) against the Hammett σ constants gave no linear relationship. When the plots were made by the modified Hammett equation including resonance effect of the substituents: log (C/C) = ρσ + γE_R, however, a straight line with ρ = 0.03 and γ = 0.9 was obtained. From these results, it may be concluded that the effect of the substitutents on the chain transfer reactivities of cumenes toward attack of a poly(methyl methacrylate) radical is attributable mainly to the resonance contribution in the transition state. These results are also compared with those for polystyryl radical reported previously and discussed.     

Monomer-isomerization polymerization. XXIII.. Monomer-isomerization polymerization of 5-phenyl-2-pentene with ziegler–natta catalysts

5-Phenyl-2-pentene (5Ph2P) was found to undergo monomer-isomerization polymerization with TiCl₃–R₃Al (R = C₂H₅ or i-C₄H₉, Al/Ti > 2) catalysts to give a polymer consisting of exclusively 5-phenyl-1-pentene (5Ph1P) unit. The geometric and positional isomerizations of 5Ph2P to its terminal and other internal isomers were observed to occur during polymerization. The catalyst activity of alkylaluminum examined to TiCl₃ was in the following order: (C₂H₅)₃Al > (i-C₄H₉)₃Al > (C₂H₅)₂AlCl. The rate of monomer-isomerization polymerization of 5Ph2P with TiCl₃–(C₂H₅)₃Al catalyst was influenced by both the Al/Ti molar ratio and the addition of nickel acetylacetonate [Ni(acac)₂], and the maximum rate was observed at Al/Ti = 2.0 and Ni/Ti = 0.4 in molar ratios.