Intravascular photoacoustic imaging of human coronary atherosclerosis

We demonstrate intravascular photoacoustic imaging of human coronary atherosclerotic plaque. The data was obtained from two fresh human coronary arteries ex vivo, showing different stages of disease. A 1.25?mm diameter intravascular imaging catheter was built, comprising an angle-polished optical fiber adjacent to a 30?MHz ultrasound transducer. Specific photoacoustic imaging of lipid content, a key factor in vulnerable plaques that may lead to myocardial infarction, is achieved by spectroscopic imaging at different wavelengths between 1180 and 1230?nm. Simultaneous imaging with intravascular ultrasound was performed.     

An improved error bound for a finite element approximation of a model for phase separation of a multi-component alloy

Using the approach of Rulla (1996 SIAM J. Numer. Anal. 33, 68-87)for analysing the time discretization error and assuming moreregularity on the initial data, we improve on the error boundderived by Barrett and Blowey (1996 IMA J. Numer. Anal. 16,257-287) for a fully practical piecewise linear finite elementapproximation with a backward Euler time discretization of amodel for phase separation of a multi-component alloy.     

The Reclaim Screw in Mammoth Silos Operating on a Free Surface: Comparison Between Horizontal and Inclined Operation on Free Flowing Bulk Solids

Although the screw conveyor, operating on a free surface, has been used for years as reclaim and storage equipment in mammoth silos, there is no documented knowledge about its spill characteristics. Research at Delft University of Technology together with ESI Eurosilo B.V. on the inclined use of the reclaim screw to achieve homogenization in mammoth silos made this lack of knowledge apparent. This paper presents the results of experiments to gain insight into the spill during reclaiming. Experiments were conducted reclaiming a horizontal surface and up‐ and downwards along an inclined surface, using a free‐flowing bulk material. A relationship was found between the theoretical and effective fill ratio. This relationship shows a certain maximum effective fill ratio and a dependence on the reclaim‐depth. As expected, the effective fill ratio drops quickly when reclaiming upwards, mostly due to flow‐ and throwback: the fill is spilled behind the screw blades and over the axis. Unexpectedly, the effective fill ratio also decreases when reclaiming downwards due to a shift of material towards the non‐reclaiming side where it is left behind forming ridges on the surface. It is expected that all three mechanisms will cause less spill when reclaiming a cohesive material. The experiments provide the desired insight into spill mechanisms during reclaiming. Indeed, the inclined use of the reclaim screw to achieve homogenization is thought feasible when reclaiming downwards.     

The response surface of an amperometric flow cell detector based on a rotating disk electrode for h.p.l.c.and continuous flow analysis

The amperometric detector flow cell based on a rotating disk electrode can be used in conjunction with continuous flow analysis as well as with h.p.l.c. The response surface of the detector as a function of flow rate, electrode rotation speed and concentration of electroactive species (hexacyanoferrate(II)) is measured in combination with continuous flow analysis. When the electrode is stationary, the detector behaves as a wall-jet detector. Rotating the electrode results in a completely different hydrodynamic flow pattern in the flow cell. The response becomes independent of the flow rate and is linearly related to the electrode rotation speed. The influence of nozzle height in the flow cell on the detector response in combination with h.p.l.c. is described. With certain combinations of nozzle height and rotation speeds, a favourable flow pattern appears to be created in the cell and the sensitivity is increased considerably.     

Finite element approximation of a model for phase separation of a multi-component alloy with a concentration-dependent mobility matrix

We consider a model for phase separation of a multi-componentalloy with a concentration-dependent mobility matrix and logarithmicfree energy. In particular we prove that there exists a uniquesolution for sufficiently smooth initial data. Further, we provean error bound for a fully practical piecewise linear finiteelement approximation in one and two space dimensions. Finallynumerical experiments with three components in one space dimensionare presented.