Thermomagnetic hysteresis and electrical transport in amorphous films

We report resistivity and magnetization measurements on an amorphous Ni₇₄Mn₂₄Pt₂ thin film in the temperature range of 3–300 K. Two significant features are apparent in both the magnetic susceptibility and electrical resistivity. A low-temperature (low-T) anomaly is observed at about 40 K, where a cusp appears in the resistivity, while a concomitant step-like increase in zero-field-cooled (ZFC) magnetization (M) appears with increasing temperature. The low-T anomaly is attributed to a crossover from a pure re-entrant spin-glass within individual domains to a mixed ferro-spin-glass regime at lower temperatures. By contrast, the high-temperature (high-T) anomaly, signaled by the appearance of hysteresis below 250 K, corresponds to the freezing of transverse spins in individual domains acting independently. Between the low-T and high-T anomalies a small but discernable magnetic hysteresis is observed for warming vs. cooling in the field-cooled (FC) case. This behavior clearly indicates the presence of domain structure in the sample, while the disappearance of this hysteresis at lower temperatures indicates the complete freezing of the spin orientation of these domains. According to these results, we have divided the magnetic state of this sample into three regions: at temperatures above 250 K, the sample behaves like a soft ferromagnet, exhibiting M vs. H loops with very small hysteresis (less than 5 Oe). As the temperature is lowered into the intermediate region (the range 40–250 K), spins become frozen randomly and progressively within the individual domains. These domains behave independently, rather than as a cooperative behavior of the sample. Weak irreversibility sets in, indicating the onset of transverse spin freezing within the domains. At temperatures below 40 K, the M vs. H loops exhibit larger hysteresis, for both the ZFC and FC cases, as in a pure spin-glass. We have also demonstrated giant noise in the resistivity at temperatures just below 250 K. Such noise can originate from fluctuations of the domains near the film surface because of competing effective bulk and surface anisotropy fields. The large observed amplitude may be explained by means of a large ferromagnetic anisotropy in the resistivity due to the large spin–orbit effect seen in NiMn systems. Finally, the low-T peak in the resistivity has been analyzed using Fisher and Langer's expression based on the Friedel Model proposed for critical transitions in transition metals (s–d systems). The fitted results are in satisfactory agreement with the predictions of this model.     

Evaluation of Coulomb Energy Difference for Light Mirror Nuclei Using Slater—Type Orbitals

Behavior of the Coulomb energy difference for light nuclei is explained in terms of the different values of the average Coulomb interaction between two particles.Coulomb energy difference according to shell model of light mirror nuclei in the Coulomb and exchange integrals in the formula can be explained with exponential-type wavefunctions.In this study,using the one-center expansion of exponential-type wavefunctions in terms of Slater-type orbitals with the same center,we derived formula for Coulomb energy difference of light mirror nuclei.     

Crystal and molecular structures of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine.

The crystal structure of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine (C15H19NO3) (I) has been determined by X-ray analysis. It crystallizes orthorhombic space group Pbca with a = 24.295(3), b = 15.086(3), c = 7.552(3)A, V = 2768(1)A3, Z = 8, Dcalc = 1.254 g/cm3, mu = (Mo K(alpha)) = 0.87 cm(-1). The title compound has analgesic activity of cycloaliphatic amine part. The molecule is deviated from planar configuration.     

4-Transitivity and 6-figures in some Moufang-Klingenberg planes

In this paper, the Moufang-Klingenberg plane over a local alternative ring R of dual numbers is studied. It is shown that its collineation group is transitive on quadrangles. It is therefore shown that the coordinatization of these Moufang-Klingenberg planes is independent of the choice of the coordinatization quadrangle. Also, the concept of 6-figures is extended to these Moufang-Klingenberg planes and it is shown that any 6-figure corresponds to only one inversible m ∈ R.     

Effect of electrolyte on surface free energy components of feldspar minerals using thin-layer wicking method

Application of the thin-layer wicking (TLW) technique on powdered minerals is useful for characterizing their surfaces. Albite (Na-feldspar) and orthoclase (K-feldspar) are feldspar minerals which are frequently found in the same matrix. Despite similarities in their physicochemical properties, separation of these minerals from each other by flotation is generally possible in the presence of monovalent salts such as NaCl. Both albite and orthoclase exhibit the same microflotation properties and rather close electrokinetic profiles in the absence of salt. In this study, contact angles of albite and orthoclase determined by the TLW technique yielded close values in the absence and presence of amine collector. While the calculated surface energies and their components determined using contact angle data reveal that the energy terms remain farther apart in the absence of the collector, the differences narrow down at collector concentrations where full flotation recoveries are obtained. However, the effect of addition of NaCl on contact angles and surface free energy components at constant amine concentration indicates that albite is significantly affected by salt addition, whereas orthoclase remains marginally affected. This interesting finding is explained on the basis of ion-exchange properties, the stability of the interface, flotation data, and zeta potential data in the presence of NaCl.     

Simultaneous tailoring of surface topography and chemical structure for controlled wettability

Wettability was controlled in a rational manner by individually and simultaneously manipulating surface topography and surface chemical structure. The first stage of this research involved the adsorption of charged submicrometer polystyrene latex particles to oppositely charged poly(ethylene terephthalate) (PET) film samples to form surfaces with different topographies/roughness; adsorption time, solution pH, solution ionic strength, latex particle size, and substrate charge density are external variables that were controlled. The introduction of discrete functional groups to smooth and rough surfaces through organic transformations was carried out in the second stage. Amine groups (-NH(2)) and alcohol groups (-OH) were introduced onto smooth PET surfaces by amidation with poly(allylamine) and adsorption with poly(vinyl alcohol) (PVOH), respectively. On latex particle adsorbed surfaces, a thin layer of gold was evaporated first to prevent particle redistribution before chemical transformation. Reactions with functionalized thiols and adsorption with PVOH on patterned gold surfaces successfully enhanced surface hydrophobicity and hydrophilicity. Particle size and biomodal particle size distribution affect both hydrophobicity and hydrophilicity. A very hydrophobic surface exhibiting water contact angles of 150 degrees /126 degrees (theta(A)/theta(R)) prepared by adsorption of 1-octadecanethiol and a hydrophilic surface with water contact angles of 18 degrees /8 degrees (theta(A)/theta(R)) prepared by adsorption of PVOH were prepared on gold-coated surfaces containing both 0.35 and 0.1 microm latex particles. The combination of surface topography and surface-chemical functionality permits wettability control over a wide range.     

Characterization of modified low density lipoprotein subfractions by capillary isotachophoresis

Oxidative modification of low density lipoproteins (LDLs) is an important pathogenetic factor in atherosclerosis. The various steps in oxidative modifications of LDL can be monitored using different methodologies with varying degrees of complexity. In this study, we propose capillary isotachophoresis (CITP) as a suitable tool to detect and measure the degree of oxidation of LDL. LDL was isolated from pooled plasma of healthy volunteers by sequential ultracentrifugation, and oxidation was performed in vitro as well as in cell culture experiments. Native LDL and oxidatively modified LDL were characterized by apo B-100 fluorescence and conjugated diene formation. Samples were separated by CITP combined with sudan black B staining. To underline the inherent advantages of this approach, CITP was compared with classical lipoprotein electrophoresis using agarose gel. We demonstrate the CITP method to be highly sensitive, as changes in peak area of the separated LDL subfractions were detected after only 2 h of oxidation. The leading LDL peaks increased, while the terminating LDL peaks decreased in parallel throughout the duration of oxidation. The LDL samples, oxidized for 4-24 h, also exhibited an increased migration velocity of the fractions. In summary, we present the first study investigating LDL-subfractions separated by CITP and the alterations of these LDL-subfractions after gradual in vitro oxidation and after oxidative modification by monocyte-derived macrophages and vascular smooth muscle cells.     

Molecular Structure,Vibrational Spectra,Molecular Docking,and ADMET Study of Cellulose Triacetate II

Optics and Spectroscopy - People have started to look for alternative sources because of the health problems created by petrochemical products used in all areas of human life and environmental...