Film formation from pure and mixed latices; transient fluorescence study

A fast transient fluorescence technique was used to study latex film formation induced by organic solvent vapor. Mixtures of pyrene (P)- and naphthalene (N)-labeled and/or pure naphthalene-labeled latex films were prepared separately from poly(methyl methacrylate) (PMMA) particles. Then these pure and mixed latex films were exposed to vapor of various chloroform-heptane mixtures in seven different experiments. In both films, fluorescence lifetimes from N were monitored during vapor-induced film formation. It was observed that N lifetimes decreased as the vapor exposure time is increased. A Stern-Volmer kinetic analysis was used for low quenching efficiencies to interpret the decrease in N lifetimes. A Prager-Tirrell model was employed to obtain back-and-forth frequencies, nu, of reptating PMMA chains during latex film formation induced by solvent vapor. In both pure and mixed latex films, nu values were found to be correlated with the chloroform content in the vapor mixture. It was observed that polymer interdiffusion obeyed a t1/2 law during film formation.     

Pure uterine lipoma

Lipomatous tumors of the uterus are unusual, benign neoplasms seen in postmenopausal women. Although many of the mixed-type cases such as lipoleiomyoma and fibrolipoma have been reported, pure uterine lipomas are extremely rare. In the literature, a few cases with pure uterine lipoma have been reported. We first present the advanced magnetic resonance findings of pure uterine lipoma, followed by those of ultrasonography (US) and computed tomography (CT). We markedly detected lipid peaks on the magnetic resonance spectroscopy (MRS) and the apparent diffusion coefficient value to be 0.00 due to chemical-shift effects with diffusion-weighted imaging (DWI). Although pelvic lipomatous tumors can be diagnosed with US and CT, in some cases, further workup may be required to localize the lesion. MRI may yield more valuable data for differential diagnosis. MRS and DWI findings provide additional clues on the nature of the lesion.     

Sonolytic degradation of halogenated organic compounds in groundwater: mass transfer effects

Organic pollutants in liquid exposed to acoustic waves behave differently according to their physical and chemical properties. Laboratory batch experiments of sonication for the degradation of trichloroethylene (TCE) and ethylene dibromide (EDB) were carried out in groundwater at 20 kHz, and 12.5 and 35 W/cm(2). A theoretical model for the batch sonication system was derived to examine the mass transfer dependency of the ultrasonic degradation. Experimental results were supported with model predictions suggesting that both liquid phase diffusion coefficient and Henry's law constant are important parameters for the sonolytic degradation of the halogenated organic compounds in groundwater. When compared with the effect of the diffusion coefficient, Henry's constant exerts a greater influence on sonolytic degradation. When Henry's constant exceeds a value of 1 (volume/volume ratio), however, it no longer has much influence on the degradation process. The results also suggest that degradation is enhanced with an increase in ultrasonic power probably due to a greater bubble residence time and the formation of larger bubble at high-energy intensities.     

Vapor-induced film formation from low-Tg particles for different solvent compositions

The photon transmission method was used to study latex film formation from poly(vinyl acetate) (PVAc) particles induced by two different solvents. Films with the same latex content were prepared from PVAc particles and exposed to vapor of ethanol-water and acetone-water mixtures in various compositions. Transmitted photon intensities, Itr, from these films increased with increasing vapor exposure time. The increase in Itr is attributed to the increase in crossing density at the polymer-polymer junction. The Prager-Tirrell model was employed to obtain the back-and-forth frequency, nu, of the reptating polymer chain during film formation induced by solvent vapor. It was observed that the produced nu values increase as the solvent content is increased for both solvents. Abilities of both solvents to form films were interpreted with the solubility parameters of the solvents and the PVAc.     

In situ Fluorescence Study of Swelling,Sorption and Desorption Processes in and out of PAAm Gels

Summary: Small molecule sorption and desorption in and out of polyacrylamide (PAAm) gels were studied at various temperatures. Pyranine (P_y) dissolved in water used as a probe. Fluorescence emission intensity, I_p from P_y was monitored for studying sorption and desorption processes. Scattered light intensities, I_sc from PAAm gel was also monitored to observed structural variations during sorption and desorption process. Li-Tanaka model was applied to produce the swelling time constants, τ_c and sorption coefficients, D_c for the swelling processes. On the other hand, sorption and desorption processes were studied and coefficients were produced by using Fickian model. Related activation energies were also calculated from the corresponding physical processes.     

Temperature Effect on Drying and Swelling of Kappa Carrageenan Gels: A Steady State Fluorescence Study

Summary: A novel technique based on in situ steady state fluorescence (SSF) measurements is introduced for studying drying and swelling of κ- carrageenan (kappa carrageenan) gels at various temperatures. κ- carrageenan gels were completely dried and then swelled in water vapor. Pyranine was embedded in κ- carrageenan and used as a fluorescence probe. Scattered light intensities, I_sc and fluorescence intensities, I were monitored during the drying and swelling of κ- carrageenan gels. It was observed that the fluorescence intensity decreased linearly as drying time was increased. A simple model consisting of Case II diffusion was used to quantify the drying processes of the κ- carrageenan gels. This moving boundary model provided packing constant, k₀. During swelling, fluorescence intensity increased exponentially as time is increased. The increase in I, was modeled using Li-Tanaka equation from which swelling time constants, τ_c and cooperative diffusion coefficients, D_c were determined. It was observed that swelling time constants, τ_c decreased and diffusion coefficients, D_c increased as the swelling temperature was increased. Activation energies for drying and swelling were also obtained and found to be 53.9 and 47.2 kJ mol⁻¹, respectively.     

Mathematical Characterization of Thermo-reversible Phase Transitions of Agarose Gels

The thermal phase transition temperatures of high (HMP) and low melting point (LMP) agarose gels were investigated by using UV–vis spectroscopy techniques. Transmitted light intensities from the gel samples with different agarose concentrations were monitored during the heating (gel-sol) and cooling (sol–gel) processes. It was observed that the transition temperatures, T_m, defined as the location of the maximum of the first derivative of the sigmoidal transition paths obtained from the UV–vis technique, slightly increased by increasing the agarose concentration in both the HMP and LMP samples. Here, we express the phase transitions of the agar-water system, as a representative of reversible physical gels, in terms of a modified Susceptible-Infected-Susceptible epidemic model whose solutions are the well-known 5-point sigmoidal curves. The gel point is hard to determine experimentally and various computational techniques are used for its characterization. Based on previous work, we locate the gel point, T₀, of sol-gel and gel-sol transitions in terms of the horizontal shift in the sigmoidal transition curve. For the gel-sol transition (heating), T₀ is greater than T_m, i.e. later in time, and the difference between T₀ and T_m is reduced as the agarose content increases. For the sol-gel transition (cooling), T₀ is again greater than T_m, but it is earlier in time for all agarose contents and moves forward in time and gets closer to T_m as the agarose content increases.     

Phenolic acid contents, essential oil compositions and antioxidant activities of two varieties of Salvia euphratica from Turkey

This study was designed to evaluate the in vitro antioxidant activities of n-hexane (Hex), dichloromethane (DCM), methanol (MeOH) and essential oils (EO) extracts obtained from Salvia euphratica var. euphratica and Salvia euphratica var. leiocalycina and to determine their essential oil and phenolic acid compositions. The samples were screened for their antioxidant activity by using DPPH and β-carotene/linoleic acid assays. Methanol extracts of both varieties exhibited strong antioxidant activities. Our results showed that rosmarinic acid was dominant phenolic acid of MeOH extracts (39.4 and 55.8?μg?mg?1, respectively). The chemical compositions of essential oils of two varieties were analysed and their main components were determined as eucalyptol (18.4%) and trans-pinocarvyl acetate (24.9%), respectively. It can be said that these varieties could be used as natural antioxidant.     

Swelling of interpenetrating networklike particles in a soft polymer matrix

Fast transient fluorescence technique was used to monitor swelling of hard latex particles in a soft polymer matrix. Various film samples were prepared from pyrene (P) and/or naphthalene (N)-labeled poly(methyl methacrylate) (PMMA) particles in a low-molecular-weight poly(isobutylene) (PIB) matrix. These PMMA particles contain interpenetrating PIB channels. Film samples were annealed at elevated temperatures to promote particle swelling. Fluorescence lifetimes, tau, were measured for each film sample. It was observed that tau values decrease as the PIB content in the matrix is increased. The decrease in tau was explained by the increase in quenching of excited P and N molecules by low-molecular-weight PIB penetrating into the PIB channels in the PMMA particles. A drastic decrease in tau above a certain temperature was attributed to the effect of particle size on the swelling of the latex particles in the PIB matrix. It was observed that small particles (P-labeled) swell at much lower annealing temperatures than large (N-labeled) particles.     

Site percolation model for latex film formation in soft polymer matrix

The UV-visible (UVV) technique was used to monitor latex film formation in a soft polymer matrix. Various film samples were prepared by increasing the amount of poly(methyl methacrylate) (PMMA) particles in a poly(isobutylene) (PIB) matrix. These samples were then annealed above the glass transition temperature to promote latex film formation. Transmitted photon intensities, Itr, were measured for each film. It is observed that Itr decrease as the latex content is increased, which was explained by the increase in scattered light intensity, Isc. The drastic increase in Isc above a certain latex content is attributed to the site percolation of latex particles in the PIB matrix. The percolation threshold and the critical exponent were measured and found to be 0.3 and 0.4, respectively. The increase in Itr by annealing of film samples above Tg was explained with the void closure process below 0.8 occupation probability. When the film is occupied completely with the latex particles, interdiffusion of polymer chains was observed. Viscous flow and chain diffusion activation energies were determined and found to be 8 and 51 kcal/mol, respectively.