Compulsorily Phase Locked Interferometer Using Orthogonally Polarized Light Source of a Modulated LD with High Extinction Ratio

This paper describes a compulsorily phase locked differential interferometer using an orthogonally polarized light source of a modulated LD with high extinction ratio to reduce non-linearity of the interferometer caused by polarization cross-talk. The current modulated LD is used as a light source to make the interferometer compact and for the scanning phase of the interferometer. The interferometer is operated compulsorily at the maximum inclination point of the fringe intensity curve by fringe scanning and an electric system. A Wollaston prism of high extinction ratio (50 dB) is used to combine the polarizing beams and to make the polarization cross-talk very small. In one light source the polarized output beams are on the same propagation axis; in the other they have a small crossing angle (2.5 mrad ∼ 10 mrad) to completely exclude non-linearity of the interferometer causded by polarization cross-talk. Using jets of a gas mixture of nitrogen and ethylene, this interferometer was demonstrated to be useful in detecting the photothermal effect of a photothermal velocimeter under phase fluctuation in a turbulent flow.     

Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

Resolving Discrepancy between Theoretical and Experimental Optical Trapping Forces Using Effects of Beam Waist and Trapping Position Displacement due to Gravity

Optical trapping forces of polystyrene microspheres are analyzed both theoretically and experimentally, and comparisons are made between the two. Discrepancies are mainly caused by straight-ray approximation for axial trapping, and by trapping-position vertical displacement due to gravity for transverse trapping.     

Self-Restoration Properties of VWP Networks by Spare Wavelength Optimization

The self-restoration properties in VWP networks are investigated with optimization about spare wavelength by simulations. Rapid restoration can be achieved by selection of rerouting path with long delay and no delay-limitation for new routes.     

On spectra of doubly regular asymmetric digraphs ofRH-type

Spectra of doubly regular asymmetric digraph of regular Hadamard type are determined.     

Magnetic pole pinning at rectangular defects on MnAs/GaAs(0 0 1)

Strong magnetic poles at characteristic rectangular defects have been observed using a magnetic force microscope on a MnAs(  1 0 0) thin film with the thickness of 30 nm. The MnAs thin film was epitaxially grown on a GaAs(0 0 1) substrate. The magnetic poles were in one-arranging direction, being independent of the magnetization direction of the film. The poles were pinned at the edges of the rectangular defects until just below the Curie temperature, and formed a stable magnetic-field loop on the MnAs surface. The stability of the magnetic pole pinning shows the distinctive feature of the magnetic domain structure on the surface with a strong anisotropy, which was built in the heterostructure of MnAs and GaAs.     

Development of measuring magnetic Compton profiles by grazing incidence geometry

A novel technique of measuring a magnetic Compton profile using the grazing angle geometry against a sample surface (Grazing Incidence Magnetic Compton Profile) has been successively developed. Measurements of a magnetic moment and a magnetic Compton profile are possible for a Fe 200 nm film on a thick glass substrate. The estimated thinnest limit for measurements is 100 nm for a Fe film.     

Synthesis of 5-heteroarylazulenes: first selective electrophilic substitution at the 5-position of azulene

1,3-Di-tert-butylazulene reacted with highly electrophilic trifluoromethanesulfonate of N-containing heterocycles to give 5-(dihydroheteroaryl)azulene derivatives in good yield and treatment of the 5-(dihydroheteroaryl)azulene derivatives with KOH afforded 5-(heteroaryl)azulenes in excellent yield.