Synthesis and characterization of a semiflexible liquid crystalline polyester with a broad nematic region

In this paper, we report on the synthesis and detailed characterization of a new semiflexible nematic liquid crystalline polyester which could serve as a 'model' polyester for a variety of physical and physico-chemical investigations. The polymer is a nematic liquid over a wide temperature range-from the glass transition temperature at ∼95°C to the isotropic transition at ∼240°C. We expect this polyester to be particularly useful for studying the effect of flow on the orientation of liquid crystalline polymers, as well as the production and removal of disclinations.     

Cyclic and telechelic ladder polymers derived from tetrahydroxytetramethylspirobisindane and 1,4‐dicyanotetrafluorobenzene

5,5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane was polycondensed with 1,4‐dicyanotetrafluorobenzene in four different solvents at 70 °C. In dimethylformamide, N‐methylpyrrolidone, and sulfolane exclusively, cyclic polymers were detectable by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry up to masses around 13,000 Da. In dimethyl sulfoxide, linear byproducts were also found. Higher temperatures caused degradation reactions catalyzed by potassium carbonate. Polycondensations performed with the addition of 4‐tert‐butyl catechol or 2,2′‐dihydroxy binaphthyl yielded linear telechelic oligomers. Equimolar mixtures of linear and cyclic ladder polymers were examined by MALDI‐TOF mass spectra to determine how the end groups and the cyclic structure influenced the signal‐to‐noise ratio. The results suggested a preferential detection of the linear chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5344–5352, 2006     

Thermal properties of some complexes of quinolinic acid with divalent metal ions

Studies of the complexes of pyridinecarboxylic acids with divalent metal ions as a function of the position of the carboxyl groups were extended. The thermal properties of the complexes of quinoline acid (pyridine-2,3-dicarboxylic acid) with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA). A correlation between these compounds and others obtained by reaction between the studied metal ions with similar acids (lutidinic acid (pyridine-2,4-dicarboxylic acid) and isocinchomeronic acid (pyridine-2,5-di-carboxylic acid) is discussed in terms of the position of the carboxyl group far from the aza group. The thermal stability of the metal complexes is in the order Mn(II) > Fe(II) > Zn(II) ? Co(II) > Ni(II) > Cu(II).     

Capillary electrophoresis of Cr(VI) reducer Arthrobacter oxydans

Rapid and effective separation of bacteria Arthrobacter oxydans was performed using capillary electrophoresis. For optimal separation of bacteria the influence of buffer concentration, pH and applied voltage were studied. It was found that the most appropriate conditions for electrophoretic mobility measurements are as follows: applied voltage 6-14 kV; buffer concentration 5-10 mM pH 6-8. At the stationary phase of growth there are always two main heterogeneous peaks. They are connected with the morphology of bacteria as well as with cell aggregation. The heterogeneity of samples may be explained by surface modifications of bacterial cells.     

Transition state localization by a density functional method. Applications to isomerization and symmetry-forbidden reactions

Summary A new transition state algorithm incorporated into the density functional code deMon, has been used to study thetrans cis-hydroxymethylene andtrans-hydroxymethylene formaldehyde isomerization processes and to localize the transition state for the decomposition of 1,3-diazacyclobutane to methyleneimine. Calculations have been performed using both local (LSD) and nonlocal spin density (NLSD) gradient-corrected approximations. Two different basis sets of small and large size have been used for the study in order to analyze the effect of the basis set dimension other than that of the nonlocal corrections on the activation energy barrier value. The results seem to confirm that density functional methods can be considered practical and reliable tools for the localization of transition states.     

Conformational behavior of nonfused biheterocycles: Part XVI. Isomeric phenyl-tetrazines and bitetrazines

We present here an ab-initio STO-3G and advanced semiempirical AM1 calculation for the structure and the conformational behavior of phenyltetrazine and bitetrazine molecules. Results for phenyltetrazine isomers show that in the absence of H-H interactions, the preferred conformation is the planar one. Instead, in the case of bitetrazines, the systems dominated by the lone pair-lone pair interactions are not planar. In the presence of direct H-H interaction as for 5-5-1,2,3,4 bitetrazine, the antiplanar conformation is the preferred one. Comparison with other systems (including one or more nitrogen lone pairs) shows that the compounds with the same ortho substituents have very similar conformational behavior irrespective of their composition. The AM1 results indicate that this method is able to give reliable conformational information for compounds in which H-H interactions are involved. A Fourier expansion of the torsional potential suggests that the first two terms fit the calculated torsional potentials well except in the case of two H-H interactions in the same molecule.     

Solvation properties of N-substituted cis and trans amides are not identical: significant enthalpy and entropy changes are revealed by the use of variable temperature 1H NMR in aqueous and chloroform solutions and ab initio calculations

The cis/trans conformational equilibrium of N-methyl formamide (NMF) and the sterically hindered tert-butylformamide (TBF) was investigated by the use of variable temperature gradient 1H NMR in aqueous solution and in the low dielectric constant and solvation ability solvent CDCl3 and various levels of first principles calculations. The trans isomer of NMF in aqueous solution is enthalpically favored relative to the cis (deltaH(o) = -5.79 +/- 0.18 kJ mol(-1)) with entropy differences at 298 K (298 x deltaS(o) = -0.23 +/- 0.17 kJ mol(-1)) playing a minor role. The experimental value of the enthalpy difference strongly decreases (deltaH(o) = -1.72 +/- 0.06 kJ mol(-1)), and the contribution of entropy at 298 K (298 x deltaS(o) = -1.87 +/- 0.06 kJ mol(-1)) increases in the case of the sterically hindered tert-butylformamide. The trans isomer of NMF in CDCl3 solution is enthalpically favored relative to the cis (deltaH(o) = -3.71 +/- 0.17 kJ mol(-1)) with entropy differences at 298 K (298 x deltaS(o) = 1.02 +/- 0.19 kJ mol(-1)) playing a minor role. In the sterically hindered tert-butylformamide, the trans isomer is enthalpically disfavored (deltaH(o) = 1.60 +/- 0.09 kJ mol(-1)) but is entropically favored (298 x deltaS(o) = 1.71 +/- 0.10 kJ mol(-1)). The results are compared with literature data of model peptides. It is concluded that, in amide bonds at 298 K and in the absence of strongly stabilizing sequence-specific inter-residue interactions involving side chains, the free energy difference of the cis/trans isomers and both the enthalpy and entropy contributions are strongly dependent on the N-alkyl substitution and the solvent. The significant decreasing enthalpic benefit of the trans isomer in CDCl3 compared to that in H2O, in the case of NMF and TBF, is partially offset by an adverse entropy contribution. This is in agreement with the general phenomenon of enthalpy versus entropy compensation. B3LY/6-311++G** and MP2/6-311++G** quantum chemical calculations confirm the stability orders of isomers and the deltaG decrease in going from water to CHCl3 as solvent. However, the absolute calculated values, especially for TBF, deviate significantly from the experimental values. Consideration of the solvent effects via the PCM approach on NMF x H2O and TBF x H2O supermolecules improves the agreement with the experimental results for TBF isomers, but not for NMF.     

Calculation of binary magnetic properties and potential energy curve in xenon dimer: second virial coefficient of (129)Xe nuclear shielding

Quantum chemical calculations of the nuclear shielding tensor, the nuclear quadrupole coupling tensor, and the spin-rotation tensor are reported for the Xe dimer using ab initio quantum chemical methods. The binary chemical shift delta, the anisotropy of the shielding tensor Delta sigma, the nuclear quadrupole coupling tensor component along the internuclear axis chi( parallel ), and the spin-rotation constant C( perpendicular ) are presented as a function of internuclear distance. The basis set superposition error is approximately corrected for by using the counterpoise correction (CP) method. Electron correlation effects are systematically studied via the Hartree-Fock, complete active space self-consistent field, second-order M?ller-Plesset many-body perturbation, and coupled-cluster singles and doubles (CCSD) theories, the last one without and with noniterative triples, at the nonrelativistic all-electron level. We also report a high-quality theoretical interatomic potential for the Xe dimer, gained using the relativistic effective potential/core polarization potential scheme. These calculations used valence basis set of cc-pVQZ quality supplemented with a set of midbond functions. The second virial coefficient of Xe nuclear shielding, which is probably the experimentally best-characterized intermolecular interaction effect in nuclear magnetic resonance spectroscopy, is computed as a function of temperature, and compared to experiment and earlier theoretical results. The best results for the second virial coefficient, obtained using the CCSD(CP) binary chemical shift curve and either our best theoretical potential or the empirical potentials from the literature, are in good agreement with experiment. Zero-point vibrational corrections of delta, Delta sigma, chi (parallel), and C (perpendicular) in the nu=0, J=0 rovibrational ground state of the xenon dimer are also reported.