Densities and Apparent Molar Volumes of Aqueous NaNO3 Solutions at Temperatures from 292 to 573 K and at Pressures Up to 30 MPa

Densities of four aqueous NaNO₃ solutions (0.100, 0.303, 0.580, 0.892 mol-kg^–1 H₂O) have been measured in the liquid phase with a constant-volume piezometer immersed in a precision liquid thermostat. Measurements were made at ten isotherms between 292 and 573 K. The range of pressure was 0.1–30 MPa. The total uncertainty of density, pressure, temperature, and concentration measurements were estimated to be less than 0.06%, 0.05%, 10 mK, and 0.014%, respectively. Values of saturated densities were determined by extrapolating experimental P- data to the vapor pressure at fixed temperature and composition. Apparent molar volumes were derived using measured values of density for the solutions and for pure water. The apparent molar volumes were extrapolated to zero concentration to yield partial molar volumes at infinite dilution. The temperature, pressure, and concentration dependence of partial and apparent molar volumes were studied. The measured values of density and apparent and partial molar volume were compared with data reported in the literature.     

Capacitive Sensor to Monitor Enzyme Activity by Following Degradation of Macromolecules in Real Time

Applied Biochemistry and Biotechnology - A capacitive sensor was developed to analyze the presence and enzymatic activity of a model protease from standard solutions by following the degradation of...     

Combustion characteristics and kinetic analysis of Turkish crude oils and their SARA fractions by DSC

In this study, two Turkish crude oils from southeastern part of Turkey and their saturate, aromatic, resin fractions were analyzed by differential scanning calorimetry (DSC). The experiments were performed at three different heating rates (5, 10, 15 °C min^?1) under air atmosphere. Two different reaction regions were observed from DSC curves due to the oxidative degradation of crude oil components. In the first reaction region, it was deduced that the free moisture, volatile hydrocarbons were evaporated from the crude oils, light hydrocarbons were burned, and fuel was formed. The second reaction region was the main combustion region where the fuel was burned. From DSC curves, it was observed that as the sample got heavier, the heat of the reaction increased. Saturates gave minimum heat of reaction. As the heating rate increased, shift of peak temperatures to high values and extended reaction region intervals were observed. The kinetic analysis of the crude oils and their fractions were also performed using ASTM E-698 and Borchardt and Daniels methods, respectively. Activation energy values of the crude oil samples and the fractions’ high-temperature oxidation region were close to each other and varied between 67 and 133 kJ mol^?1 in ASTM and 35 and 154 kJ mol^?1 in Borchardt and Daniels methods, respectively.     

Radioactivity measurements in epiphytic lichens of Uludağ Mountain in Western Anatolia

Activity concentrations of gross-β, naturally occurring ²²⁶Ra, ²³²Th, ²¹⁰Pb, ⁷Be and anthropogenic ¹³⁷Cs in epiphytic lichens collected from Uluda? Mountain are presented and discussed with the aim of evaluating potential usability of lichens as a biomonitor. The activity concentrations of gross-β, ¹³⁷Cs, ⁴⁰K, ²²⁶Ra, ²³²Th, ²¹⁰Pb and ⁷Be in the lichen samples were found to be in the range of 177–707, 4.05–94.26, 86–211, below detection limit (BDL)—19.2, BDL—14.0, 229–872, and 72.1–220.7 Bq kg^?1 in dry weight, respectively. ¹³⁷Cs content in collected epiphytic lichens was in descending order: Parmelia sulcata > Lobaria pulmonaria > Pseudevernia furfuracea > Usnea filipendula. The best biomonitor for ¹³⁷Cs among the lichen species used in this study was determined as Parmelia sulcata. Pearson’s correlation coefficient was calculated between ¹³⁷Cs and ⁴⁰K activity concentrations using a statistical package program (SPSS ver. 17.0) and a negative correlation value (R = ?0,323, p = 0,222) was obtained. The highest ²²⁶Ra and ²³²Th activity concentrations were found in Bo?azova Yaylas? which has a geological structure including granitic rocks. It was found that ¹³⁷Cs and ⁷Be activity concentrations in species demonstrated an inverse behaviour. The effect of mean annual precipitation and temperature on ⁷Be activity concentration was determined using multi regression analysis. Also, correlations between the ¹³⁷Cs and ⁷Be, and ⁴⁰K and ⁷Be were investigated.     

Characterization and optimization of heroin hapten-BSA conjugates: method development for the synthesis of reproducible hapten-based vaccines

A potential new treatment for drug addiction is immunization with vaccines that induce antibodies that can abrogate the addictive effects of the drug of abuse. One of the challenges in the development of a vaccine against drugs of abuse is the availability of an optimum procedure that gives reproducible and high yielding hapten-protein conjugates. In this study, a heroin/morphine surrogate hapten (MorHap) was coupled to bovine serum albumin (BSA) using maleimide-thiol chemistry. MorHap-BSA conjugates with 3, 5, 10, 15, 22, 28, and 34 haptens were obtained using different linker and hapten ratios. Using this optimized procedure, MorHap-BSA conjugates were synthesized with highly reproducible results and in high yields. The number of haptens attached to BSA was compared by 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, modified Ellman’s test and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Among the three methods, MALDI-TOF MS discriminated subtle differences in hapten density. The effect of hapten density on enzyme-linked immunosorbent assay (ELISA) performance was evaluated with seven MorHap-BSA conjugates of varying hapten densities, which were used as coating antigens. The highest antibody binding was obtained with MorHap-BSA conjugates containing 3–5 haptens. This is the first report that rigorously analyzes, optimizes and characterizes the conjugation of haptens to proteins that can be used for vaccines against drugs of abuse. The effect of hapten density on the ELISA detection of antibodies against haptens demonstrates the importance of careful characterization of the hapten density by the analytical techniques described.     

Anticancer Aminoferrocene Derivatives Inducing Production of Mitochondrial Reactive Oxygen Species

Elevated levels of reactive oxygen species (ROS) and deficient mitochondria are two weak points of cancer cells. Their simultaneous targeting is a valid therapeutic strategy to design highly potent anticancer drugs. The remaining challenge is to limit the drug effects to cancer cells without affecting normal ones. We have previously developed three aminoferrocene (AF)-based derivatives, which are activated in the presence of elevated levels of ROS present in cancer cells with formation of electron-rich compounds able to generate ROS and reduce mitochondrial membrane potential (MMP). All of them exhibit important drawbacks including either low efficacy or high unspecific toxicity that prevents their application in vivo up to date. Herein we describe unusual AF-derivatives lacking these drawbacks. These compounds act via an alternative mechanism: they are chemically stable in the presence of ROS, generate mitochondrial ROS in cancer cells, but not normal cells and exhibit anticancer effect in vivo.     

Molecularly Imprinted Supermacroporous Cryogels for Myoglobin Recognition

Myoglobin is a primary iron, and oxygen-binding protein of muscle tissues and levels can be an important diagnostic biomarker for acute myocardial infarction, myocardial necrosis, or other cardiac diseases. The establishment of myoglobin recognition systems is important because of its protein’s structural and functional values in physiology, biochemistry, and diagnostic value in some damaged muscle tissue and cardiac diseases. For this purpose, we used molecular imprinting technique for myoglobin recognition from aqueous solutions and human plasma. In the first step, myoglobin-imprinted poly(hydroxyethyl methacrylate) (PHEMA) cryogels (MGb-MIP) were prepared, and optimum myoglobin adsorption conditions were determined. Selectivity experiments have been done with the competitive proteins, and myoglobin adsorption from IgG and albumin-free human plasma was studied. The purity of the desorbed samples was determined with SDS-PAGE. The desorption efficiency and reusability of the MGb-MIP cryogels were tested, and it was shown that without any significant loss in the adsorption capacity, MGb-MIP cryogels can be used a number of times for myoglobin recognition and separation.     

Natural Melanin Nanoparticle‐decorated Screen‐printed Carbon Electrode: Performance Test for Amperometric Determination of Hexavalent Chromium as Model Trace

A biosensor was prepared with natural melanin nanoparticles (MNP) decorated on a screen‐printed carbon electrode (SPCE). Hexavalent chromium was selected as a well‐known heavy metal ion to be detected for testing the performance of novel biosensor. Natural MNP was extracted from cuttlefish (Sepia officinalis) ink. Surface decoration of SPCEs with MNP was performed by two different methods. The first one was layer‐by‐layer assembly (LBL‐A) for different cycle times(n). In the second one, plasma treatment of SPCE incorporated with evaporation‐induced self‐assembly (EI‐SA) techniques including different incubation times in MNP solutions. The performance of both modified SPCEs were tested for amperometric detection of Cr(VI) in various water samples, and peak reduction of Cr(VI) was determined at 0.33 V. Amperometric results showed wide linear ranges of 0.1–2 μM and 0.1–5 μM of Cr(VI) for SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA, respectively. The sensitivities of SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA techniques were 0.27 μA μM^?1 and 0.52 μA μM^?1, respectively. In addition, both modified SPCEs selectively detected Cr(VI) in a model aqueous system composed of certain other heavy metals and minerals, and tap and lake water samples. The LOD and LOQ values for 12h‐EI‐SA were 0.03 μM and 0.1 μM, respectively. This showed that MNP‐modified‐SPCEs generated via EI‐SA techniques have the potential to be an alternative to conventional detection methods such as ICP‐MS.     

Phytochemical Analysis and Habitat Suitability Mapping of Glycyrrhiza glabra L. Collected in the Hatay Region of Turkey

The growth and quality of licorice depend on various environmental factors, including the local climate and soil properties; therefore, its cultivation is often unsuccessful. The current study investigated the key factors that affect the contents of bioactive compounds of Glycyrrhiza glabra L. root and estimated suitable growth zones from collection sites in the Hatay region of Turkey. The contents of three bioactive compounds (glycyrrhizic acid, glabridin, and liquiritin), soil factors (pH, soil bearing capacity, and moisture content), and geographical information (slope, aspect, curvature, elevation, and hillshade) were measured. Meteorological data (temperature and precipitation) were also obtained. An analysis of variance (ANOVA) and multivariate analysis of variance (MANOVA) were performed on the data. The soil bearing capacity, moisture content, slope, aspect, curvature, and elevation of the study area showed statistically significant effects on the glycyrrhizic acid and liquiritin contents. A habitat suitability zone map was generated using a GIS-based frequency ratio (FR) model with spatial correlations to the soil, topographical, and meteorological data. The final map categorized the study area into four zones: very high (15.14%), high (31.50%), moderate (40.25%), and low suitability (13.11%). High suitability zones are recommended for further investigation and future cultivation of G. glabra.     

An Air‐Stable Heterobimetallic Si2M2 Tetrahedral Cluster

Air‐ and moisture‐stable heterobimetallic tetrahedral clusters [Cp(CO)₂MSiR]₂ (M=Mo or W; R=SitBu₃) were isolated from the reaction of N‐heterocyclic carbene (NHC) stabilized silyl(silylidene) metal complexes Cp(CO)₂M=Si(SitBu₃)NHC with a mild Lewis acid (BPh₃). Alternatively, treatment of the NHC‐stabilized silylidene complex Cp(CO)₂W=Si(SitBu₃)NHC with stronger Lewis acids such as AlCl₃ or B(C₆F₅)₃ resulted in the reversible coordination of the Lewis acid to one of the carbonyl ligands. Computational investigations revealed that the dimerization of the intermediate metal silylidyne (M≡Si) complex to a tetrahedral cluster instead of a planar four‐membered ring is due to steric bulk.