Mesomorphic properties of orthopalladated complexes of laterally substituted azobenzene derivatives, 2-alkoxycarbonyl-4-(4-ethoxyphenylazo)phenyl 4-methoxybenzoates

Homologous series of 2-alkoxycarbonyl-4-(4-ethoxyphenylazo)phenyl 4-methoxybenzoates (L) and their orthopalladated μ-chloro dimers (Pd₂Cl₂L₂) have been synthesized and their thermotropic phase transition behaviour has been characterized. The ligands, L, are three-ring nematogens with their central rings substituted in the 2-position by n-alkyl chains of varied length. The thermal stability of the nematic phases decreases rapidly with increasing side chain length and then levels off as the series is ascended. In every case the mesomorphic phase appears only over a small temperature range (less than 20° C). The orthopalladated species also proved to be nematogenic. Melting and clearing points rise on the average by 87° C and 126° C, respectively, and thus the temperature ranges of the nematic phases are enlarged considerably upon metallation. In relation to the observed stabilization of the nematic phases, particularly of higher homologues, a lath-like molecular structure, in which the side chains of the ligands fill up the clefts of the core part, has been deduced for a Pd2Cl2L2 homologue from its solution ¹H-NMR spectrum.     

Long-lived triplet charge-separated state in naphthalenediimide based donor–acceptor systems

1,4,5,8-Naphthalenediimides (NDIs) are widely used motifs to design multichromophoric architectures due to their ease of functionalisation, their high oxidative power and the stability of their radical anion. The NDI building block can be incorporated in supramolecular systems by either core or imide functionalization. We report on the charge-transfer dynamics of a series of electron donor–acceptor dyads consisting of a NDI chromophore with one or two donors linked at the axial, imide position. Photo-population of the core-centred π–π* state is followed by ultrafast electron transfer from the electron donor to the NDI. Due to a solvent dependent singlet–triplet equilibrium inherent to the NDI core, both singlet and triplet charge-separated states are populated. We demonstrate that long-lived charge separation in the triplet state can be achieved by controlling the mutual orientation of the donor–acceptor sub-units. By extending this study to a supramolecular NDI-based cage, we also show that the triplet charge-separation yield can be increased by tuning the environment.

Ultrafast electron transfer from singlet and triplet excited states in equilibrium results in the population of both singlet and triplet charge-separated states.     

Novel methyl helianthrones as photosensitizers: synthesis and biological evaluation

A combination of light, oxygen and a photosensitizer is used to induce death of cancer cells by photodynamic therapy. In this study, we have synthesized several new methyl helianthrone derivatives and compared their phototoxicity with that of hypericin. In contrast to hypericin, methyl helianthrones are soluble in aqueous solutions and have a broad range of light absorbance, which allows the use of polychromatic light. Structural modifications of methyl helianthrone demonstrated that substitution of hydrogen atoms of methyl helianthrone at Positions 2 and 5 with Br atoms or methylation of its phenolic hydroxyls, significantly increases the corresponding singlet oxygen quantum yield and their phototoxicity toward alphaT3-1, M2R and LNCaP cells. The phototoxicity of some of these compounds was similar to that of hypericin. Methyl helianthrones, like hypericin, accumulated mainly in the perinuclear region as evident by confocal microscopy. Irradiation of cells pretreated with methyl helianthrone derivatives generates intracellular reactive oxygen species and lipid free radicals, as shown by a fluorescentic probe and electron paramagnetic resonance methods, respectively. The phototoxicity of these methyl helianthrones as well as their ability to oxidize membrane lipids were significantly decreased on addition of specific Type-II inhibitors, suggesting the involvement of singlet oxygen as the main oxidant.     

Effect of surface mobility on the particle sliding along a bubble or a solid sphere

The sliding velocity of glass beads on a spherical surface, made either of an air bubble or of a glass sphere held stationary, is measured to investigate the effect of surface mobility on the particle sliding velocity. The sliding process is recorded with a digital camera and analyzed frame by frame. The sliding glass bead was found to accelerate with increasing angular position on the collector's surface. It reaches a maximum velocity at an angular position of about 100 degrees and then, under certain conditions, the glass bead leaves the surface of the collector. The sliding velocity of the glass bead depends strongly on the surface mobility of a bubble, decreasing with decreasing surface mobility. By a mobile surface we mean one which cannot set up resistive forces to an applied stress on the surface. The sliding velocity on a rigid surface, such as a glass sphere, is much lower than that on a mobile bubble surface. The sliding velocity can be described through a modified Stokes equation. A numerical factor in the modified Stokes equation is determined by fitting the experimental data and is found to increase with decreasing surface mobility. Hydrophobic glass beads sliding on a hydrophobic glass sphere were found to stick at the point of impact without sliding if the initial angular position of the impact is less than some specific angle, which is defined as the critical sticking angle. The sticking of the glass beads can be attributed to the capillary contracting force created by the formation of a cavity due to spontaneous receding of the nonwetting liquid from the contact zone. The relationship between the critical sticking angle and the particle size is established based on the Yushchenko [J. Colloid Interface Sci. 96 (1983) 307] analysis.     

Triangle-free graphs and completely positive matrices

Central European Journal of Operations Research - Completely positive matrices are matrices that can be decomposed as $$BB^T$$ , where B is an entrywise nonnegative matrix. These matrices have many...     

Preparation and characterization of novel branched beta-cyclodextrins having beta-D-galactose residues on the non-reducing terminal of the side chains and their specific interactions with peanut (Arachis hypogaea) agglutinin

Six novel branched beta-cyclodextrins (betaCDs) having beta-D-galactose residues on the non-reducing terminal of the sugar side chains, namely 6(1),6(4)-di-O-(beta-D-galactosyl)-betaCD (10), 6-O-(beta-D-galactosyl)-betaCD (11), 6(1),6(4)-di-O-(beta-lactosyl)-betaCD (14), 6-O-(beta-lactosyl)-betaCD (15), 6(1),6(4)-di-O-(4'-O-beta-D-galactosyl-beta-lactosyl)-betaCD (18), and 6-O-(4'-O-beta-D-galactosyl-beta-lactosyl)-betaCD (19), were chemically synthesized using the trichloroacetimidate method. The reaction products were separated by HPLC on an amino column into dibranched and monobranched betaCDs. Their structures were confirmed by mass spectrometry (MS) and two-dimensional (2D) NMR spectroscopic analysis. To study the length of the sugar side chains attached to the CD ring, which leads to differences in the functions of the branched CDs, interactions of these compounds with peanut (Arachis hypogaea) agglutinin (PNA) were investigated using an optical biosensor and an inhibition assay based on hemagglutination. The results showed that all branched betaCDs interacted with PNA, and the binding affinity was 18>14>10 and 19>15>11 when the derivatives were compared on the basis of side chain length.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

Colorimetric determination of dimethoate or omethoate

A simple, sensitive and rapid colorimetric method is described for determining dimethoate [O,O-dimethyl-S-(N-methylcarbanoylmethyl)phosphorodithioate] and omethoate by an enzymatic method using pig liver acetone powder as enzyme source and p-nitrobenzenediazonium fluoroborate as the chromogenic reagent. This colorimetric method is more sensitive than non-enzymatic methods. Inhibition can be detected at ng levels and amounts ranging from 50 to 1000 ng of omethoate and from 1 to 10 mug of dimethoate can be estimated.