Role of Surface Molecular Architecture and Energetics of Hydrogen Bonding Sites in Adsorption of Polymers and Surfactants

Hydrogen bonding is generally thought to be an ubiquitous adsorption mechanism, which often foils selective adsorption schemes. Through investigation of hydrogen bonding energy and its dependence on surface molecular architecture, it may be possible to develop new methodologies to control the adsorption of surfactants and polymeric flocculants, depressants, and dispersants used in particulate processing industries. A model system using St?ber silica spheres and polyethylene oxide, a polymer known for its ability to form hydrogen bonds, was examined. The effect of two different surface treatments of the silica particles, calcination and rehydroxylation, upon the adsorption of two polymer molecular weights was studied. The adsorption behavior was then linked to the respective surface structures via characterization of the surfaces using FTIR, NMR, and Raman techniques. In this paper role of hydrogen bonding sites and surface architecture on adsorption is discussed. Copyright 2000 Academic Press.     

Role of Electrostatic Repulsion on the Viscosity of Bidisperse Silica Suspensions

The flow behavior of bidisperse aqueous silica suspensions has been studied at different electrolyte concentrations as a function of shear rate, total volume fraction of the particles, and volume ratio of small to large particles. It is shown that the range of the electrostatic repulsion plays an important role in determining the viscosity of the suspension. Binary mixtures of particles of longer range repulsive forces showed higher viscosities than the suspensions of shorter range electrostatic interactions. Bimodal suspensions of long-range interactions showed non-Newtonian behavior over wider ranges of shear due to the deformation of the ionic cloud around the particles, which is larger in these systems. The viscosity of bimodal suspensions used in this study was scaled with respect to the viscosity of the related monosized systems and the viscosity of one bimodal suspension at a fixed total volume fraction of the particles, employing our earlier scaling method. The model normalizes the effect of colloidal forces by introducing a scaling factor that collapses the data into a single curve for bimodal suspensions of a particular size ratio, and it is shown that the model is valid for systems with both short-range and long-range repulsive forces. Copyright 1999 Academic Press.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

Chemical composition,antimicrobial, and lipase enzyme activity of essential oil and solvent extracts from Serapias orientalis subsp. orientalis

The volatile components of essential oil (EO), SPME, and SPME of solvent extracts ( n -hexane, methanol, and water) obtained from fresh Serapias orientalis subsp. orientalis ( Soo ) were analyzed by GC-FID/MS. EO of Soo gave 11 compounds in the percentage of 99.97%; capronaldehyde (37.01%), 2-( E )-hexenal (23.19%), and n -nonanal (19.05%) were found to be major constituents. SPME GC-FID/MS analyses of fresh plant and solvent extracts of Soo revealed 7, 12, 7, and 4 compounds within the range of 99.7% to 99.9%. Limonene (76.5%, 41.7%, and 61.3%) was the major compound in SPMEs of the n -hexane and methanol extracts. α -Methoxy- p -cresol (52.9%) was the main component in its water extract. The antimicrobial activity of EO and the solvent extracts of Soo were screened against 9microorganisms. EO showed the best activity against Mycobacterium smegmatis , with 79.5 µg/mL MIC value. The n -hexane, methanol, and water extracts were the most active against the Staphylococcus aureus within the range of 81.25–125.0 µg/mL (MIC). IC ₅₀ values for the lipase enzyme inhibitory activity of EO and solvent extracts ( n -hexane, methanol, and water) were determined to be 59.87 µg/mL, 64.03 µg/mL, 101.91 µg/mL, and 121.24 µg/mL, respectively.     

Theoretical studies on the conformations of selenamides

Ab initio HF/6-31+G*, MP2/6-31+G*, B3LYP/6-31+G* level calculations have been performed on HSe-NH₂ to estimate the Se-N rotational barriers and N-inversion barriers. Two conformers have been found withsyn andanti arrangement of the NH₂ hydrogens with respect to Se-H bond. The N inversion barriers in selenamide are 1.65, 2.47, 1.93 kcal/mol and the Se-N rotational barriers are 6.58, 6.56 and 6.12 kcal/mol respectively at HF/6-31+G*, MP2/6-31+G* and B3LYP/6-31+G* levels respectively. The n_N →Σ *_Se-H negative hyperconjugation is found to be responsible for the higher rotational barriers.     

Development of an HPLC method for determination of pentachloronitrobenzene, hexachlorobenzene and their possible metabolites

Background

Pentachloronitrobenzene (PCNB) and hexachlorobenzene (HCB) are highly toxic and widespread in every environmental compartment. Some of metabolic products such as amino/nitro containing chlorinated aromatic compounds can be determined by gas chromatography coupled with electron capture detector (GC-ECD). However, it is difficult to identify some of chlorophenolic and chloroquinolic intermediates produced from PCNB and HCB by the above mentioned technique. Therefore, for analysis of these compounds and their metabolites, we have developed a high performance liquid chromatography (HPLC) based method.

Results

The extraction of PCNB and HCB from soil and minimal salt medium was carried out with ethyl acetate and hexane respectively with good recoveries (98% for PCNB and 97% for HCB). The validation of the proposed extraction and HPLC method was done by analysis of PCNB and HCB biodegradation and their metabolites identification from anaerobic enriched soil samples.

Conclusion

A rapid, sensitive and simple HPLC based analytical method was developed for the analysis of PCNB, HCB and their possible intermediates.     

Electrophoretic deposition of calcium phosphates from non-aqueous media

Electrophoretic deposition of ultrafine calcium phosphates from non-aqueous suspensions onto metallic substrates was attempted in order to obtain coatings with varying porosities. Aging effects were studied by measuring changes in the electrophoretic deposition behavior of the calcium phosphate particles in the non-aqueous suspensions. It was observed that the surfaces of the calcium phosphates develop significant electrostatic charge during aging in order to enable the formation of a dense and uniform deposit. The addition of surface charge conditioners such as HCl was found to have a similar effect. Dispersion conditions were varied to obtain coatings of the desired green densities, which were sintered to different microporosities.     

Der Einfluß gelöster Kohlenwasserstoffgase in Lösung oberflächenaktiver Substanzen auf die Schaumflotation von Mineralien

Ohne Zusammenfassung     

Inactivation of bacterial endospores by photocatalytic nanocomposites

A novel biocidal photocatalytic nanocomposite, composed of TiO(2) and multi-walled carbon nanotubes (MWNTs), was synthesized via wet chemistry followed by a heat treatment. Uniform anatase coatings on MWNTs were successfully obtained with a thickness of a few nanometers. The nanostructure of the composite was determined by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). The needle-like shape of the nanocomposite provided more than three times higher photocatalytic specific surface area than commercial TiO(2) nanoparticles (Degussa P25) when dispersed in water. Moreover, under ultraviolet (UV) radiation the excited electrons can be trapped at the interface between the TiO(2) layer and MWNTs and they can also be scavenged through the conductive graphitic layers. Thus, an intense photochemical reaction yielding a powerful biocide can be expected. Irradiating bacterial endospores (Bacillus cereus) with solar UV lamps in presence of the novel photocatalyst successfully inactivated the spores while solar UV lamps only or solar UV Lamps with Degussa P25 showed no significant inactivating behavior. Performance of photocatalytic nanocomposites was assessed based on time to achieve 90% inactivation of spores (LD(90)) and also in terms of time required to achieve a 1.0 log(10) reduction of spores in the tail region of the inactivation curve.