Development of a bioanalytical method for the quantification of sinococuline in human plasma and its application in phase I clinical pharmacokinetic study

A selective, highly sensitive, precise, and novel bioanalytical method has been developed and validated to quantify sinococuline, an active constituent present in the phytopharmaceutical drug product containing Cocculus hirsutus plant extract, in vivo. Chromatographic separation was achieved on a Luna Omega Polar-C18 bonded analytical column maintained at 45°C. The isocratic mobile phase consisted of methanol and ammonium formate buffer (60:40, v/v) at acidic pH with a low flow rate of 0.250 mL/min. Detection was performed on an API 4000 mass spectrometer using electrospray ionization in positive polarity and multiple reaction monitoring mode to achieve a lower limit of quantification of 1.50 ng/mL. Excellent accuracy and precision were obtained after extracting the analyte from plasma samples using a chemical analogue as an internal standard in the absence of an isotope-labeled compound. The extraction efficacy was evidenced from recovery study, and the analyte was found to be stable in plasma. Validation study demonstrated linearity with coefficient of correlation, r ≥ 0.99, and minimal matrix effect. This bioanalytical method was successfully applied to evaluate pharmacokinetic parameters of sinococuline from a phase I clinical trial of an aqueous extract of C. hirsutus in healthy human volunteers.     

One-pot Synthesis,Crystal Structures and Antimicrobial Activities of Two New 1,4-Disubstituted 1,2,3-Triazole-4-Carboxylates

Two new 1,4-disubstituted 1,2,3-triazoles-4-carboxylates were synthesized via click reaction. Compound 1a was synthesized by the interaction of 6-nitro-tetrazolo[1.5-a]-pyridine with ethyl propynoate at room temperature in the presence of Cu(OAc)2 as a catalyst and THF as solvent. Compound 1b was also synthesized by the same manner except that tert-butyl propionate, instead of ethyl propynoate, was used. The compounds were characterized by IR, 1H-NMR, 13C-NMR and single-crystal X-ray diffraction analysis. Compound 1a(C10H9N5O4) crystallizes in the triclinic system, space group P1 with a = 5.0894(9), b = 8.9834(13), c = 13.089(2) ?, α= 83.041(7), β= 80.256(7), γ=87.296(8)°, V = 585.24(16)?3, Z = 2, Mr = 263.22, crystal size(mm) = 0.37 × 0.20 ×0.18,(I 2σ(I)) = 8557, 2493, 1229, Rint = 0.057. Compound 1b(C12H13N5O4) crystallizes in the monoclinic system, space group P21/c with a = 6.8854(5), b = 21.783(2), c = 9.3986(8) ?,β = 93.239(4)°, V = 1407.4(2)?3, Z = 4, Mr = 291.27, crystal size(mm) = 0.38 × 0.22 × 0.20,(I 2σ(I)) = 11842, 3172, 1866, Rint = 0.047. Antimicrobial assay results showed that the title compounds display excellent activities to different bacterial and fungal strains.     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Radiation pasteurised oil palm empty fruit bunch fermented with Pleurotus sajor-caju as feed supplement to ruminants

In solid state fermentation, Pleurotus sajor-caju has been found to be able to degrade at least 30% oil palm empty Fruit Bunch (EFB) fibre leaving 70 % useful materials. Conditions under which fermentation carried out were investigated. It was found that, in the temperature range between 25– 28 °C, relative ph between 6–8, moisture between 60–70 % and medium composition of CaCO₃: rice bran 2 %: 5 % were the optimum conditions. The results showed in fermented products that, there were substantial reduction in cellulosic component such as Crude Fiber (CF, 18 %); Acid Detergent Fibre (ADF, 45 %), Neutral Detergent Fibre (NDF, 61 %) and Acid Detergent Lignin (ADL, 14 %). However, Crude Protein (CP, 10%) increased resulted from single cell protein enrichment of mycelial microbial mass. The mass reductions of substrate in fermentation process corresponds to the CO₂ released during fermentation. Hence, attributable to the decreased in content of CF, ADF, NDF, and ADL. The digestibility study has also been carried out to determine the useful level of this product to ruminant. Aflatoxin content was detected low in both the initial substrates and products. Based on nutritional value and low content of aflatoxin, the product is useful as a source of roughage to ruminant.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

A lead(II) ion selective electrode via a metal complex of poly(hydroxamic acid)

A new lead(II) electrode has been constructed with poly(hydroxamic acid) (PHXA) as the active material and silicone rubber as the supporting material. The electrode gave near Nerstian response over the concentration range 4 × 10⁻⁵−1 × 10⁻²M lead(II). The detection limit of the electrode is approximately 4 × 10⁻⁶M and the electrode works well in the pH range 4.5–6.0. The response time was 50–120 sec over the whole concentration range and the electrode has a working life of at least 4 weeks. Iron(III) severely poisoned the electrode membrane. Nickel(II) and mercury(II) gave very strong interference compared to copper(II), silver(I), cobalt(II), sodium(I), potassium(I), zinc(II) and cadmium(II) which gave some or little interference. Values determined with atomic absorption (AAS) and a commercial lead(II) electrode were in good agreement with those measured with the lead(II) electrode reported here.     

Aminopropylcellulose,synthesis and derivatization

The preparation of 3-aminopropylcellulose from cyanoethylcellulose is readily achieved. Reduction of the cyano groups with borane-dimethyl sulfide in tetrahydrofuran or a borane-tetrahy-drofuran complex proceeds quantitatively in 3 h to a corresponding 3-aminopropylcellulose. The presence of primary amine functions is confirmed by spectroscopy and a positive ninhydrin test; the concentration of amino substituents, as ascertained by titration, ranged from 1.2 to 6.4 meq/g. Because the derivatives are neither soluble nor excessively swollen in water, applications as ion-exchange resins or chromatographic supports can be envisioned. Treatment of 3-aminopropyl-cellulose with acetyl chloride, phenyl isocyanate, or p-toluenesulfonyl isocyanate produced 3-acetamido-, 3-(N′-phenyluredo)-, or 3-(N′-p-toluenesulfonyluredo)-N-propylcellulose. Alkylation with methyl chloride yielded a water-soluble quaternary ammonium salt.     

Determining the chromophore in the amylopectin–iodine complex by theoretical and experimental studies

A partial hydrolysis of amylose followed by the addition of iodine provides a spectrum almost identical to that of the amylopectin–iodine (API) complex suggesting the involvement of smaller “amylose-like” units in the API complex. Our theoretical studies on different polyiodine and polyiodide species suggest that a nearly linear I₄ unit stabilized within the cavity of a small “amylose-like” helix is responsible for the characteristic API spectrum. Since there are 2.75 anhydroglucose residues (AGU) for every iodine atom in the amylose–iodine (AI) complex and a structural similarity exists between the API and the AI (amylose–iodine) complexes, we identify (C₆H₁₀O₅)₁₁I₄ to be the chromophore in the API complex. © 1994 John Wiley & Sons, Inc.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.