Carbohydrate-based nanostructured catalysts: applications in organic transformations

The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well.     

Zinc polyoxometalate on activated carbon: an efficient catalyst for selective oxidation of alcohols with hydrogen peroxide

[PW₁₁ZnO₃₉]^5? was immobilized on activated carbon and characterized using Fourier transform infrared, X‐ray diffraction, Brunauer–Emmett–Teller and elemental analysis techniques. Effective oxidation of various alcohols with hydrogen peroxide was performed in the presence of this catalyst. Easy separation of the catalyst from the reaction mixture, cheapness, high activity and selectivity, stability as well as retained activity in subsequent catalytic cycles make this supported catalyst suitable for small‐scale synthesis. Copyright © 2015 John Wiley & Sons, Ltd.     

Error estimation,adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization

In this paper, an adaptive FE analysis is presented based on error estimation, adaptive mesh refinement and data transfer for enriched plasticity continua in the modelling of strain localization. As the classical continuum models suffer from pathological mesh-dependence in the strain softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once a new mesh is generated, state variables and history-dependent variables are mapped from the old finite element mesh to the new one. In order to transfer the history-dependent variables from the old to new mesh, the values of internal variables available at Gauss point are first projected at nodes of old mesh, then the values of the old nodes are transferred to the nodes of new mesh and finally, the values at Gauss points of new elements are determined with respect to nodal values of the new mesh. Finally, the efficiency of the proposed model and computational algorithms is demonstrated by several numerical examples.     

Convergence analysis of perturbed hemivariational inequalities

We consider the rate of convergence for a class of perturbed hemivariational inequalities in reflexive Banach Spaces. Our results can be viewed as an extension and refinement of some previous known results in this area.     

Application of headspace solvent microextraction to the analysis of mononitrotoluenes in waste water samples

The possibility of applying headspace solvent microextraction (HSME) for determination of mononitrotoluenes (MNTs) in waste water samples is demonstrated. A drop of n-amyl alcohol containing naphthalene as an internal standard was suspended from the tip of a microsyringe needle over the headspace of stirred sample solutions for a predescribed extraction period. The drop was then injected directly into a gas chromatograph. Optimization of experimental parameters such as the nature of extracting solvent, microdrop and sample volumes, sampling temperature, stirring rate, ionic strength of the solution, pH and extraction time on HSME efficiency were investigated. Then enrichment factor, dynamic linear range (DLR), limit of detection (LOD) and precision of the method were evaluated by water samples spiked with MNTs. Finally, the method was successfully applied to the extraction and determination of the mononitrotoluenes in waste waters of both P.C.I. Company and Research Center of Azad University.     

Bioaccumulation and biosorption of stable strontium and <Superscript>90</Superscript>Sr by <Emphasis Type="Italic">Oscillatoria homogenea</Emphasis> cyanobacterium

The ability of living filamentous cells of the cyanobacterium Oscillatoria homogenea to separate stable strontium and ⁹⁰Sr from aqueous solution is demonstrated in this study. On a basis of filamentous cell biovolume, the removal were 43.78 nM·ml·(mm³)⁻¹ and 3129.48 mBq·ml·(mm³)⁻¹ after 240 hour incubation. The optimum pH for strontium uptake is 9±0.3. The increasing biovolume of the blue-green alga elevates sorption. In the liquid culture containing 21.2 mm³·ml⁻¹ filamentous cells and 1000 nM·ml⁻¹ initial strontium concentration, the maximum strontium removal was 455.34 nM·ml·(mm³)⁻¹. At 1200 Lux illumination, the maximum removal value was 58.62 nM·ml·(mm³)⁻¹, and at the initial strontium concentration of 6590 nM·ml⁻¹, 235.40 nM·ml·(mm³)⁻¹ removal was observed. The experimental data fitted to Langmuir isotherm and the model parameters and correlation coefficient (R ²) were q _max = 7.143 μg·(mm³)⁻¹, b = 0.003 and 0.99, respectively.     

Investigation and comparison of biological effects of regioselectively synthesized thiazole derivatives

In this study, anticancer, antibacterial (against hospital-isolated antibiotic-resistant Escherichia coli strains), antifungal, and antioxidant effects of synthesized heterocyclic compounds 5 and 7 containing thiazole core were examined. Cytotoxicity testing was utilized against MCF-7 breast cancer cells via MTT cell viability assay. Antibacterial and antifungal activities were checked out according to Clinical and Laboratory Standards Institute (CLSI) guidelines, and antioxidant properties were evaluated through scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radicals. Results showed the viability of breast cancer cell lines was reliant on concentration of heterocycles and time of incubation. Synthetic compounds exhibited excellent antibacterial and antifungal properties base on their minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimum fungicidal concentration (MFC) values as well as high antioxidant activities according to their IC₅₀ values. Higher anticancer and antibacterial properties were observed with compound 7; on the contrary, thiazole 5 had better antioxidant effects. They can be introduced as potent antimicrobial, antioxidant, and anticancer agents.     

Design and fabrication of a Fourier transform spectrometer by means of thermally actuated tunable grating

In this article, the design and fabrication of a Fourier transform spectrometer, based on a thermally actuated tunable grating, are presented. Grooves of a binary grating are filled with nitrobenzene, the refractive index of which highly depends on temperature. Through the application of heat, the temperature of the nitrobenzene is changed, which in turn changes the efficiency of the grating. To measure the spectrum of a light beam, the light under inspection is first passed through the grating and the intensity of the zero order of diffraction is recorded as a function of temperature. Next, the Fourier transform of the measured data is calculated. The resolution of the spectrometer is also discussed. Finally, a micro-spectrometer that is based on a thermally actuated grating is proposed.     

Fabrication of a passive 3D mixer using CO2 laser ablation of PMMA and PDMS moldings

In this article a novel method for the fabrication of a passive 3D mixer is presented. It has been shown that in CO2 laser ablation of Polymethyl Methacrylate (PMMA), bending and straight cone structures can be fabricated by adjusting the laser scanning parameters. The effect of the bending cones in the flow direction of a fluid is discussed with computer simulation and a passive mixer based on such structures is designed. Bending and straight cones are fabricated on a PMMA substrate using CO2 laser ablation technique. The structure is molded with PDMS to make two half-channels with bending and straight cones extending out of the surface. Two PDMS structures are stacked on top of each other with a certain displacement to fabricate the mixer.