Tailoring the Thermal Conductivity of Rubber Nanocomposites by Inorganic Systems: Opportunities and Challenges for Their Application in Tires Formulation

The development of effective thermally conductive rubber nanocomposites for heat management represents a tricky point for several modern technologies, ranging from electronic devices to the tire industry. Since rubber materials generally exhibit poor thermal transfer, the addition of high loadings of different carbon-based or inorganic thermally conductive fillers is mandatory to achieve satisfactory heat dissipation performance. However, this dramatically alters the mechanical behavior of the final materials, representing a real limitation to their application. Moreover, upon fillers’ incorporation into the polymer matrix, interfacial thermal resistance arises due to differences between the phonon spectra and scattering at the hybrid interface between the phases. Thus, a suitable filler functionalization is required to avoid discontinuities in the thermal transfer. In this challenging scenario, the present review aims at summarizing the most recent efforts to improve the thermal conductivity of rubber nanocomposites by exploiting, in particular, inorganic and hybrid filler systems, focusing on those that may guarantee a viable transfer of lab-scale formulations to technological applicable solutions. The intrinsic relationship among the filler’s loading, structure, morphology, and interfacial features and the heat transfer in the rubber matrix will be explored in depth, with the ambition of providing some methodological tools for a more profitable design of thermally conductive rubber nanocomposites, especially those for the formulation of tires.     

Probenecid and benzamide: DSC applied to the study of an “impossible” pharmaceutical system

Journal of Thermal Analysis and Calorimetry - The study of the binary system probenecid–benzamide is an excellent example of the power and the limits of thermal analysis applied to the...     

The Physico-Chemical Properties of Glipizide: New Findings

The present work is a concrete example of how physico-chemical studies, if performed in depth, are crucial to understand the behavior of pharmaceutical solids and constitute a solid basis for the control of the reproducibility of the industrial batches. In particular, a deep study of the thermal behavior of glipizide, a hypoglycemic drug, was carried out with the aim of clarifying whether the recognition of its polymorphic forms can really be done on the basis of the endothermic peak that the literature studies attribute to the melting of the compound. A number of analytical techniques were used: thermal techniques (DSC, TGA), X-ray powder diffraction (XRPD), FT-IR spectroscopy and scanning electron microscopy (SEM). Great attention was paid to the experimental design and to the interpretation of the combined results obtained by all these techniques. We proved that the attribution of the endothermic peak shown by glipizide to its melting was actually wrong. The DSC peak is no doubt triggered by a decomposition process that involves gas evolution (cyclohexanamine and carbon dioxide) and formation of 5-methyl-N-[2-(4-sulphamoylphenyl) ethyl] pyrazine-2-carboxamide, which remains as decomposition residue. Thermal treatments properly designed and the combined use of DSC with FT-IR and XRPD led to identifying a new polymorphic form of 5-methyl-N-[2-(4-sulphamoylphenyl) ethyl] pyrazine-2-carboxamide, which is obtained by crystallization from the melt. Hence, our results put into evidence that the check of the polymorphic form of glipizide cannot be based on the temperature values of the DSC peak, since such a peak is due to a decomposition process whose Tonset value is strongly affected by the particle size. Kinetic studies of the decomposition process show the high stability of solid glipizide at room temperature.     

Diffusion-controlled solid-state reactions of spherical particles, a general model for multiphase binary systems

The formal treatment of the diffusion-controlled growth of n binary compounds with narrow homogeneity range during the reaction of a sphere of reactant A immersed in reactant B is presented and discussed. Both constituents are assumed to be mobile. The reaction products are assumed to grow simultaneously as uniform and compact concentric layers with ideal contact at the interfaces as well as at the external surface of the sphere. The kinetic equations follow from the coupling between chemical reactions and partitioning of the diffusion flux at phase boundaries. The results for the formation of two and three compounds are presented. The influence of the initial radius of the sphere, of the relative magnitude of the kinetic constants, and of the volume variation is discussed in detail.     

Quantification methods of amorphous/crystalline fractions in high-energy ball milled pharmaceutical products

In this work, thermoanalytical, diffractometry, and microscopy measurements have been performed in order to characterize the effect of high energy milling on a drug active in the migraine prophylaxis and smoke cessation. We can assert that the mechanical treatment induces only a partial amorphisation of the solid phase, in particular it reduces the crystal order by producing lattice defects which propagate from the surface to the bulk crystal. For this reason, the DSC is able to detect the presence of ordered solid, while the powder X-ray diffractometry, because of its low penetration depth, does not reach the crystalline core of the particles.     

Spatial structure and energy spectrum of ion beams studied with CN detectors within a small PF device

The paper reports the application of Solid-State Nuclear Track Detectors to study the pulsed plasma-ion streams emitted from plasma-focus (PF) type discharges, which were performed within a low-energy PACO device constructed at Instituto de Fisica Arroyo Seco. The PACO device was operated under static initial gas conditions or with dynamic gas puffing. Studies of the structure of the fast deuteron beams were carried out within an energy range from 80 keV to about 2 MeV. Studies of ion energy and an ion angular distribution were also performed. The measurements showed that the fast deuterons are emitted in many “narrow” micro-beams, as in other larger PF devices. The anisotropy of the deuteron angular distribution was explained by the stochastic character of the formation of local ion sources within the PF discharge column.     

Changes in cerebral activity after decreased upper-limb hypertonus: an EMG-fMRI study

Objective

Whereas several studies have used functional magnetic resonance imaging (fMRI) to investigate motor recovery, whether therapy to decrease post-stroke hypertonus alters central motor patterns remains unclear. In this study, we used continuous electromyography (EMG)-fMRI to investigate possible changes in movement-related brain activation in patients receiving Botulinum toxin (BoNT-A) for hand-muscle hypertonus after chronic stroke.

Methods

We studied eight stroke patients all of whom had hemiparesis and associated upper-limb hypertonus. All patients underwent an fMRI-EMG recording and clinical-neurological assessment before BoNT-A and 5 weeks thereafter. The handgrip motor task during imaging was fixed across both patients and controls. The movements were metronome paced, movement amplitude and force were controlled with a plastic orthosis, dynamometer and EMG recording. An age-matched control group was recruited from among healthy volunteers underwent the same fMRI-EMG recording.

Results

Before BoNT-A, while patients moved the paretic hand, fMRI detected wide bilateral activation in the sensorymotor areas (SM1), in the supplementary motor area (SMA) and cerebellum. After BoNT-A blood oxygenation level-dependent (BOLD) activation decreased in ipsilateral and contralateral motor areas and became more lateralized. BOLD activation decreased also in ipsilateral cerebellar regions and in the SMA.

Conclusion

Changes in peripheral upper-limb hypertonus after BoNT-A were associated to an improvement in active movements and more lateralized and focalized activation of motor areas. The clinical and EMG-fMRI coregistration technique we used to study hand-muscle hypertonus in patients receiving BoNT-A after chronic stroke should be useful in future studies seeking improved strategies for post-stroke neurorehabilitation.     

Self-assembled monolayers and electrostatically self-assembled multilayers of polyalkylviologens on sulfonate-modified gold and indium–tin–oxide electrodes

Self-assembly (SA) of polyviologens with linear alkyl spacers PVn (n = 3–10) on sulfonate-primed gold and ITO electrode surfaces has been investigated by CV, QCM, XPS and AFM. The polymers form stable and relatively dense monolayers even from 10⁻⁴ M PVn concentration. The viologen surface density is decreased as n is increased but for n = 10 and on alkylsulfonate-primed surfaces a strong adsorption takes place, with decreased redox potential and very narrow cyclic voltammogram of the absorbed layer due to organized structures on the surface.Stable and regular electrostatically self-assembled (ESA) multilayers are built on sulfonate-primed surfaces with PV3 and polysulfonates. From XPS analysis, the composition of the PVn/polysulfonate multilayers corresponds to a 1:1 ratio of polyanion and polycation charges, i.e., no extra non-polymeric ion is present, independently from the alkane chain length. The rate of electron transfer within the multilayers (diffusion coefficient = ca. 10⁻⁹ cm² s⁻¹) is higher than for analogous bulk materials.