Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Composition of particles emitted at largep T and medium angles inpp,dd, andαα collisions at the CERN intersecting storage rings

The relative yields of kaons and protons compared with the yield of pions at highp _T and polar angles θ away from 90° (in the range from 10° to 45°) are presented forpp, dd, and αα interactions at a centre-of-mass energy \(\sqrt {s_{NN} } = 31\) GeV per nucleon-nucleon collision. The measured particle ratios depend on the atomic mass numberA of the beam particles and on θ. TheA dependence of the ratios becomes stronger for largerp _T and is more pronounced at smaller polar angles.     

High-p T αα andαp interactions

Properties of secondaries associated with a high-p _T charged trigger particle (3<p _T <5 GeV/c) were studied for αp and αα interactions at c.m. energies \(\sqrt s = 88\) GeV and 125 GeV, respectively. Thep _T distributions of secondaries in the away-jet and trigger-jet regions were compared with those for high-p _{T pp} interactions. No statistically significant differences were seen, except at lowp _T . Momentum and angular distributions of spectator and leading protons were studied as a function of charge and rapidity of the trigger hadron. The observed correlations between trigger charge and number of spectator protons provide evidence of valence quark contributions to the trigger jet.     

Synthesis and Characterization of Optical Sol–Gel Adhesive for Military Protective Polycarbonate Resin

Sol–gel adhesive material for isostatic hotpressing lamination process was synthesized using 3-aminopropyltrimethoxysilane (APTES), 3-glycidyloxypropyltrimethoxysilane (GPTS) and methacryloxypropyltrimethoxysilane (MPTS) as precursors. Reaction dynamics between APTES and GPTS was followed on-line with Raman spectroscopy. The lamination process was optimized by varying hotpressing times and pressures at the constant temperature. Mechanical shear strength properties were found to be excellent for studied composition, 25–30 kg/cm² at its best. One possible application of laminated polycarbonate (PC) structure is a soldier helmet visor. Therefore, the ballistic protection properties were tested by shooting with 1.1 gram standard fragment, and determining the v₅₀ velocity value, which corresponds to 50% perforation. The laminated structure gave 5.7% better protection compared with the solid polycarbonate. The laminated components were found to have high optical transparency at the visible wavelengths as well as high environmental stability.     

Monitoring of yeast fermentation by ion mobility spectrometry measurement and data visualisation with Self-Organizing Maps

Ion mobility spectrometry (IMS) measurement combined with unsupervised neurocomputing is considered as a new potential method for on-line monitoring of fermentation and other processes producing volatile compounds that involve micro-organisms. This was demonstrated in a model system in which a strain of brewer’s yeast (Saccharomyces cerevisiae) was cultivated in a bench-top fermenter. Five phases of yeast growth could be detected from measurements of the exhaust gases from the fermenter, as indicated by the changes in ion mobility spectra analysed by computational methods.The data were first processed using the Self-Organizing Map (SOM) algorithm, the results showing that the phases of fermentation can be detected and identified. The cultivations were also shown by Sammon’s mapping to be comparable to a certain level of accuracy. Contaminated cultivation could be detected by its distinctive ion mobility spectrometry profile.     

Geometry prediction of hafnocenes by quantum chemical methods

The performance of quantum chemical methods for geometry prediction of hafnocenes was evaluated. HF, B3LYP and MP2 in combination with nonrelativistic (MHF) and relativistic (MWB and LANL2DZ) basis sets for hafnium together with standard basis sets 3-21G*, 6-31G* and 6-311G** for other elements were applied. Five basic structural parameters of the optimized structures of the hafnocenes were compared with experimental crystal structures obtained from the Cambridge structural database. Altogether 80 hafnocenes were included in the analysis. The results show that relativistic corrections are necessary for Hf atom. However, even the Hartree–Fock (HF) method, when combined with relativistic pseudopotentials, reproduces the experimental crystal structures with significant accuracy. The good performance of the HF method can be understood to originate from the absence of significant near-degeneracy correlations for hafnium. On average, the B3LYP and MP2 methods provide structural parameters somewhat closer to the experimental ones.     

Two-proton correlations in the target fragmentation region of nuclear collisions at 200A GeV

Correlations between protons are studied in the target fragmentation region of reactions of protons and¹⁶O with C, Cu, Ag, Au and of³²S with Al and Au at 200A GeV. The emitted protons were measured with the Plastic Ball detector in the WA80 experiment at the CERN SPS. The comparison of the correlation function with calculations, assuming a spherical, gaussian shaped source with a lifetime τ=0 fm/c, allows the extraction of radius parameters. The values are very close to those expected from the geometry of the target nuclei and increase with the target mass as αA _Target ^1/3 . Even in proton induced reactions the whole target nucleus is involved. The dependence of the radii on centrality, polar angleθ _lab, and energy, and their relation to measured proton yields are presented.     

Potentiometric and voltammetric detection using a two-channel fountain cell

The design and use of a two-channel fountain cell in potentiometric and voltammetric detection is described. The two flows produced two distinct sectors inside the thin layer region and one of the sectors was used as the internal electrolyte of a reference electrode built into the cell body and the other as the indicator/counter electrode section. The behavior of the flowthrough Ag/AgCl reference electrode was first investigated and found satisfactory and it was then employed as the reference electrode in the subsequent experiments. Continuous and flow-injection measurements were made using the Fe(III)/Fe(II) redox couple in potentiometry and the reduction of Fe(III) in voltammetry.     

In situ reaction mechanism studies on the atomic layer deposition of Al2O3 from (CH3)2AlCl and water

Reaction mechanisms between dimethylaluminum chloride and deuterated water in the atomic layer deposition (ALD) of Al2O3 were studied at 150-400 degrees C using a quartz crystal microbalance (QCM) and a quadrupole mass spectrometer (QMS). The observed reaction byproducts were DCl and CH3D. QMS showed that about one-third of the chlorine, and half of the methyl ligands were released during the (CH3)2AlCl pulse. The growth rate deduced from the QMS and QCM data was in qualitative agreement with the previously published growth rate from ALD film growth experiments.     

Upper limit for thermal direct photon production in heavy-ion collisions at 60 and 200A·GeV

The production of direct photons has been investigated in reactions ofp and¹⁶O projectiles at 60 and 200A·GeV with C and Au nuclei. Photon and ⁰ spectra have been measured in the pseudorapidity range 1.52.1 for the transverse momentum region 0.4 GeV/cp _T 2.8 GeV/c employing the lead-glass spectrometer SAPHIR. An upper limit of 15% at the 90% confidence level for the direct photon signal relative to the neutral pion production is obtained from the comparison of measured photon spectra with Monte Carlo simulations of the hadronic background based on the reconstructed yield of ⁰ and mesons. Consequences for a possible phase transition to a quark-gluon plasma are discussed.