PtII-Catalyzed Hydroxylation of Terminal Aliphatic C(sp3)−H Bonds with Molecular Oxygen

The practical application of Shilov-type Pt catalysis to the selective hydroxylation of terminal aliphatic C−H bonds remains a formidable challenge, due to difficulties in replacing Pt^IV with a more economically viable oxidant, particularly O₂. We report the potential of employing FeCl₂ as a suitable redox mediator to overcome the kinetic hurdles related to the direct use of O₂ in the Pt reoxidation. For the selective conversion of butyric acid to γ-hydroxybutyric acid (GHB), a significantly enhanced catalyst activity and stability (turnover numbers (TON)>30) were achieved under 20 bar O₂ in comparison to current state-of-the-art systems (TON<10). In this regard, essential reaction parameters affecting the overall activity were identified, along with specific additives to attain catalyst stability at longer reaction times. Notably, deactivation by reduction to Pt⁰ was prevented by the addition of monodentate pyridine derivatives, such as 2-fluoropyridine, but also by introducing varying partial pressures of N₂ in the gaseous atmosphere. Finally, stability tests revealed the involvement of Pt^II and FeCl₂ in catalyzing the non-selective overoxidation of GHB. Accordingly, in situ esterification with boric acid proved to be a suitable strategy to maintain enhanced selectivities at much higher conversions (TON>60). Altogether, a useful catalytic system for the selective hydroxylation of primary aliphatic C−H bonds with O₂ is presented.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Improved customer choice predictions using ensemble methods

In this paper various ensemble learning methods from machine learning and statistics are considered and applied to the customer choice modeling problem. The application of ensemble learning usually improves the prediction quality of flexible models like decision trees and thus leads to improved predictions. We give experimental results for two real-life marketing datasets using decision trees, ensemble versions of decision trees and the logistic regression model, which is a standard approach for this problem. The ensemble models are found to improve upon individual decision trees and outperform logistic regression.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

TOF-SIMS and XPS-investigations of ion implanted single crystal 1b-diamonds

Near surface zones of (48)Ti- and (52)Cr-implanted single crystal diamonds (1b-MCD) were characterized by XPS, TOF-SIMS and white light interference microscopy (WLI). By the combination of WLI and TOF-SIMS it was possible to calibrate the depth scale of TOF-SIMS and XPS depth profiles quantitatively. The adjustment of TOF-SIMS and XPS elemental depth profiles in the implantation maximum increases the quantitative detection limit of the implanted elements by more than two orders of magnitude and enables the interpretation of results from wear simulation experiments. Peak fits of XPS C(1s)-photolines indicate the fraction and chemical nature of carbide-like structures in the implantation zone. Qualitative hints on carbide compounds are possibly included in the reconstructed TOF-SIMS spectra but this information can presently only be extracted with the aid of XPS analyses.     

Nitrido-Sodalithe. II. Synthese,Struktur und Eigenschaften von M(6+(y/2)–x)H2x[P12N24]Zy mit M = Fe,Co, Ni,Mn; Z = Cl,Br, I; 0 ≤ x ≤ 4; y ≤ 2

Nitrido-Sodalites. II. Synthesis, Crystal Structure, and Properties of M_{(6+(y/2)–x)}H_2x[P₁₂N₂₄]Z_y with M = Fe, Co, Ni, Mn; Z = Cl, Br, I; 0 ≤ x ≤ 4; y ≤ 2 The nitrido sodalites M_{(6+(y/2)–x)}H_2x[P₁₂N₂₄]Z_y with M = Fe, Co, Ni, Mn; Z = Cl, Br, I; 0 ≤ x ≤ 4; y ≤ 2 are obtained by the reaction of HPN₂ or [PN(NH₂)₂]₃ with the metal halogenide MZ₂ (T = 700°C). The compounds are isotypic to Zn_(7–x)H_2x[P₁₂N₂₄]Cl₂. An increase of the ionic radii of the cations or anions results in an expansion of the lattice which is caused by an increase of the P? N? P angle. The influence of the cation is more dominant than that of the anion. By reacting [PN(NH₂)₂]₃ with metal halogenide (MZ₂) hydrogen free, X-ray amorphous products are obtained. The formation of the chloride-containing P? N-sodalite in this reaction begins at temperatures below 450°C.     

Coherent anti-Stokes Raman Scattering Microscopy.

Coherent anti-Stokes Raman scattering (CARS) microscopy is presented as a new nonlinear optical technique. The combination of vibrational spectroscopy and microscopy allows highly sensitive investigations of unlabelled samples. CARS is an ideal tool for studying a broad variety of samples. The main drawback of the technique is its non-zero-background nature, which implies that the signal has to be detected against a nonresonant background. The need to solve this problem is reflected in the rapid technological developments that have been observed during the last decade. Recent results show that CARS microscopy has the potential to become an important complementary technique that can be used with other well-established microscopic methods. Although it has some limitations, it offers unique access to many problems that cannot be tackled with conventional techniques. For this reason, it can be expected that the impressive growth of the field will continue.     

Bestimmung der molaren Masse und der Ladungszahl von Polymerelektrolyten mit der Ultrazentrifuge

Zusammenfassung In der vorliegenden Arbeit wird das Sedimentationsgleichgewicht der Systeme Na₆[H₂W₁₂O₄₀]—NaCI—H₂O und Na₆[H₂W₁₂O₄₀]—NaClO₄— H2O untersucht. Die scheinbare molare Masse Mapp des Natriummetawolframats wird in beiden Systemen als Funktion der Natriummetawolfrarnat-Anfangspartialdichte ₀ ^PX _z gemessen. Durch lineare Extrapolation der Funktion Mapp = Mapp (PP,, ) auf die Polymerelektrolyt-Anfangspartialdichte Null können die Grenzwerte der scheinbaren molaren Masse (Mapp)o ermittelt werden. Aus den (Mapp)o-Werten wird die Abhängigkeit der Größe (ln _PXz /m _BX ) _mPXz von der NaCI- bzw. NaClO₄-Molalität berechnet.Die Bestimmung der molaren Masse und der (stöchiometrischen) Ladungszahl eines Polymerelektrolyten aus den experimentell ermittelten (Mapp)o-Werten unter Anwendung der Lamm-Williams-Gleichung wird diskutiert. Zur Ermittlung der beiden Größen müssen mehrere Versuchsreihen mit zwei verschiedenen Fremdelektrolyten durchgeführt werden. Externe Messungen sind nicht erforderlich.Man erhält auf diese Weise verläßliche Werte so-wohl der molaren Masse als auch der (stächiometrischen) Ladungszahl.

---

Summary The sedimentation equilibria of the systems sodium metatungstate-sodium chloride-water and sodium metatungstate-sodium perchlorate-water are investiated. In both systems the apparent molecular mass Mapp of sodium metatungstate (PX _z) is measured in dependence on partial density ₀ ^PX _z before centrifugation. By linear extrapolation of the function Mapp = Mapp ( ₀ ^PX _z the limiting value (Mapp)o for ₀ ^PX _z = 0 is obtained. The variation with sodium chloride and sodium perchlorate molality of the quantity (ln _{PX z} ^m _BX )mPX_z is calculated from (Mapp)o data.The determination of the molecular mass and the algebraic valency of a polymeric ion by means of the (Mapp)o values calculated by Lamm-Williams equation is discussed. In order to obtain these two quantities at least two series of experiments are required, each of which using a different supporting electrolyte. External measurements are not necessary. In this way reliable values for the molecular mass as well as for the stoichiometric valency are obtained.

---

---

Mit 5 Abbildungen und 3 Tabellen