Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.     

Determination of palladium in alloys and ores by substoichiometric thermal neutron activation analysis

A rapid, selective and simple method have been developed for the determination of palladium in alloys and ores by thermal neutron activation analysis, incorporating substoichiometric solvent extraction of Pd/II/ with 1,2,3-benzotriazole /1,2,3-BT/ into methyl iso-butyl ketone /MIBK/. Two samples and a standard can be processed and counted within two hours.     

Catalytic oxidation of thiols to disulfides using iodine and CeCl3·7H2O in graphite

A very simple procedure for the efficient oxidation of thiols to disulfides catalyzed by I₂/CeCl₃·7H₂O in graphite and ethyl acetate as the solvent, in an open system at room temperature is described. The reaction proceeds cleanly under mild conditions and was performed with aromatic, aliphatic, and heterocyclic thiols.     

A new steroidal saponin from Agave attenuata

A new steroidal saponin was isolated from the leaves of Agave attenuata. Its structure was established as (3beta,beta,25S)-spirostan-3-yl O-beta-D-glucopyranosyl-(1 --> 2)-beta-D-glucopyranosyl-(1 --> 2)-O-[beta-D-glucopyranosyl-(1 --> 3)]-beta-D-glucopyranosyl-(1 --> 4)-beta-D-galactopyranoside. The structural identification was performed using detailed analyses of 1H- and 13C-NMR spectra including 2D NMR spectroscopic techniques (COSY, HETCOR, and COLOC) and chemical conversions. The hemolytic activity of the steroidal saponin was evaluated using an in vitro assay.     

Influence of lanthanum exchange on the catalytic properties of HY zeolite in cyclohexene transformation

Cyclohexene transformation was used as test reaction to study the effect of lanthanum exchange on the catalytic behavior of HY zeolite cracking catalysts. Lanthanum has an overall positive effect increasing both acitivity and stability of HY zeolite and maximum selectivity towards isomerization products is obtained at higher conversion.

---

HY. , , HY. .

     

Phase transitions in the tantalum-hydrogen system observed by PAC

The perturbation felt by¹⁸¹Hf probes in a¹⁸¹HfTa lattice loaded with 30 at% hydrogen was observed by PAC as a function of temperature. Three different interactions were identified: 1) Ν_Q1=433 (6) MHz, η=0.45 2) Ν_Q2=142 (9) MHz, η=0.9, and 3) Ν_Q?0, σ=4–14 Μ^?1 which are attributed to the Β^?, ε^? and α-phase in TaH system, respectively.     

Determination of ethanol in fuel ethanol and beverages by Fourier transform (FT)-near infrared and FT-Raman spectrometries

Fourier transform-near infrared (FT-NIR) and FT-Raman spectrometries have been used to design partial least squares (PLS) calibration models for the determination of the ethanol content of ethanol fuel and alcoholic beverages. In the FT-NIR measurements the spectra were obtained using air as reference, and the spectral region for PLS modeling were selected based on the spectral distribution of the relative standard deviation in concentration. In the FT-Raman measurements hexachloro-1,3-butadiene (HCBD) has been used as an external standard. In the PLS/FT-NIR modeling for ethanol fuel analysis 50 ethanol fuel standards (84.9-100% (w/w)) were used (25 in the calibration, 25 in the validation). In the PLS/FT-Raman modeling 25 standards were used (13 in the calibration, 12 in the validation). The PLS/FT-NIR and FT-Raman models for beverage analysis made use of 24 standards (0-100% (v/v)). Twelve of them contained sugars (1-5% (w/w)), one-half was used in the calibration and the other half in the validation. Different spectral pre-processing were used in the PLS modeling, depending on the type of sample investigated. In the ethanol fuel analysis the FT-NIR pre-processing was a 17 points smoothed first derivative and for beverages no spectral pre-processing was used. The FT-Raman spectra were pre-processed by vector normalization in the ethanol fuel analysis and by a second derivative (17 points smoothing) in the beverage analysis. The PLS models were used in the analysis of real ethanol fuel and beverage samples. A t-test has shown that the FT-NIR model has an accuracy equivalent to that of the reference method (ASTM D4052) in the analysis of ethanol fuel, while in the analysis of beverages, the FT-Raman model presents an accuracy equivalent to the reference method. The limits of detection for NIR and Raman calibration models were 0.05 and 0.2% (w/w), respectively. It has also been shown that both techniques, present better results than gas chromatography (GC) in evaluating the ethanol content of beverages.     

Determination of weight distribution ratios of Pa(V) and Np(V) with some extraction chromatography resins and the AG1-X8 resin

Literature data on distribution ratios (D_w) of Np(V) and Pa(V) for the AG1-X8 resin are scarce whereas those related on resin capacity factors (k′) values for TEVA, TRU and U/TEVA resins are absent. Therefore, batch extraction experiments for Pa(V) and Np(V) from HCl and HNO₃ media were realized, at tracer scale, with AG1-X8 and EIChroM resins (TEVA, TRU and U/TEVA). Based on the new D_w and k′ values obtained in this study, a new protocol for Pa/Np separation has been developed leading to a better separation factor of 10⁵ and a chemical yield of 97 ± 3% and 99 ± 1% for Pa and Np, respectively. A separation of ²³¹Pa from uranium matrix was successfully tested.