In vivo tibial lead measurement to assess the health hazard of Venezuelan workers

Gamma-ray induced X-ray emission (GIXE) technique for elemental lead in-vivo tibial measurement using a large volume hyper pure germanium detector is presented with the most convenient source-sample-detector geometry. The system operates advantageously when several parameters are considered for a lower dead time operation. The detection limit (DL) is better that 3.5 μg/g of Ca. Results of in-vivo average tibial lead concentration for some of the monitored groups are: control 7 μg of lead per g of Ca; gasoline filling attendants 6 μg/g of Ca; custom office workers near the DL; industrial workers range from DL up to 84±3 μg/g of Ca, suggesting that lead accumulation in the bone does not represent a major health risk This revised version was published online in August 2006 with corrections to the Cover Date.     

Absorptiometric determination of micro- and submicroamounts of iron using an extractive method with pyridine-2-acetaldehyde salicyloylhydrazone

The formation and extraction into chloroform of iron complex with PASH (λ_max = 640 nm) was studied. Beer's law is obeyed between 2.7 and 16.0 μg · ml⁻¹ of iron, in organic phase (10 ml). The method can be applied to volume ratios V_aq.:V_org. from 1:1 to 20:1. The minimum concentration determinable in aqueous phase is 135 ng ml⁻¹ of iron. The interferences of 73 species were evaluated and eliminated when it was possible. The extraction method of the green complex was applied for the spectrophotometric determination of iron(II) in several standard, geochemical, and bromatological samples. A procedure based on the standard addition method was applied satisfactorily to the determination of as little as 25 ng of iron(II) per milliliter.     

Estimating the PDMS-Coated, SPME-Fibre/Water- and Fibre/Gas-Partition Coefficients of Chlorinated Ethenes by Headspace-SPME

In this work, a simple, fast and reproducible method is presented for the determination of fibre/liquid-phase and fibre/gas-phase partition coefficients of five chlorinated ethenes on a poly-(dimethylsiloxane), PDMS-coated, solid-phase microextraction fibre, by employing a headspace HS-SPME coupled with gas chromatography. The partition coefficients were estimated by a numerical method using a Level-I fugacity method coupled with parameter-estimation software. Dimensionless partition coefficients between SPME fibre and liquid as well as gas phases were obtained at temperatures of 10 °C, 25 °C and 30 °C. The partition coefficients of the fibre and the gas phase, K _fg, increase with decreasing temperature by a factor of ≈2 to 6, and they are directly proportional to the linear slope of the regression line. The same tendency is observed for the partition coefficient of the fibre and liquid phase, K _fw, in a factor ≈1.2 to 2.0. The sorption enthalpy is higher in the gas phase; therefore, the sorption onto the fibre is favoured at lower temperatures. The correlation of the log K _ow versus log K _fw and log K _oa versus log K _fg shows a linear relationship with the number of chlorine atoms in the C = C molecule. Long-term experiments resulted in sorption to Teflon surfaces and possible losses in 43 mL vials, not observed in 250 mL Boston bottles.     

Formal total synthesis of β-pipitzol

(±)-$\text{O}$-methylperezone ($\text{1b}$) was obtained by selective oxidative demethylation of (±)-leucoperezone trimethyl ether ($\text{4a}$). Compound ($\text{4a}$) was prepared by condensation of 2,3,5-trimethoxytoluene ($\text{5e}$) with 6-methyl-5-hepten-2-one, followed by reductive removal of the tertiary alcohol. The aromatic precursor $\text{5e}$ was prepared in four steps from 2,3-dimethoxytoluene ($\text{5a}$) and, alternatively, in three steps from 5-bromoveratraldehyde ($\text{6a}$). Racemic $\text{1b}$ and $\text{4a}$ were directly compared with the optically active molecules prepared from natural R(-)-perezone ($\text{1a}$).     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

Growth of ZIF-8 MOF Films with Tunable Porosity by using Poly (1-vinylimidazole) Brushes as 3D Primers

This work reports on a novel and versatile approach to control the structure of metal–organic framework (MOFs) films by using polymeric brushes as 3D primers, suitable for triggering heterogeneous MOF nucleation. As a proof-of-concept, this work explores the use of poly(1-vinylimidazole) brushes primer obtained via surface-initiated atom transfer radical polymerization (SI-ATRP) for the synthesis of Zn-based ZIF-8 MOF films. By modifying the grafting density of the brushes, smooth porous films were obtained featuring inherently hydrophobic microporosity arising from ZIF-8 structure, and an additional constructional interparticle mesoporosity, which can be employed for differential adsorption of targeted adsorbates. It was found that the grafting density modulates the constructional porosity of the films obtained; higher grafting densities result in more compact structures, while lower grafting density generates increasingly inhomogeneous films with a higher proportion of interparticle constructional porosity.     

Local boundedness of weak solutions to the Diffusive Wave Approximation of the Shallow Water equations

In this paper we prove that weak solutions to the Diffusive Wave Approximation of the Shallow Water equations

${?}_{t}u?\mathrm{?}?({(u?z)}^{\alpha }|\mathrm{?}u{|}^{\gamma ?1}\mathrm{?}u)=f$

are locally bounded. Here, u describes the height of the water, z is a given function that represents the land elevation and f is a source term accounting for evaporation, infiltration or rainfall.     

2D difference gel electrophoresis reference map of a Fusarium graminearum nivalenol producing strain

Fusarium graminearum is widely studied as a model for toxin production among plant pathogenic fungi. A 2D DIGE reference map for the nivalenol‐producing strain 453 was established. Based on a whole protein extract, all reproducible spots were systematically picked and analyzed by MALDI‐TOF/TOF, leading to the identification of 1102 protein species. The obtained map contributes to the annotation of the genome by identifying previously nondescribed hypothetical proteins and will serve as a reference for future studies aiming at deciphering F. graminearum biology and chemotype diversity.