Aggregation effects in maximum covering models

The level of aggregation is critical in discrete location analyses as it affects the level of data collection required, computation times and the usefulness of the analyses. We examine the effects of three alternative nodal aggregation schemes on (i) the model's solution times, (ii) the locational decisions indicated by the maximum covering model, (iii) the coverage provided by the aggregate solutions compared with the optimal solutions, and (iv) the coverage predicted by the aggregate model compared with the coverage that results from using the aggregate model's facility sites and the disaggregate demands. The results suggest that considerable aggregation can be tolerated without incurring large errors in total coverage, but that location errors are introduced at moderate levels of aggregation. The magnitude of these errors is significantly affected by the aggregation scheme employed.     

Aggregation Behavior of Pluronic-L64 in Presence of Sodium Dodecyl Sulphate in Water

The effect of sodium dodecyl sulfate (SDS) on the micellization and aggregation behavior of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO₁₃ PO₃₀ EO₁₃) have been investigated by various techniques like, cloud point, viscosity, isothermal titration calorimetry (ITC), differential scanning calorimetry (DSC), fluorescence spectroscopy, room temperature phosphorescence (RTP), and small angle neutron scattering (SANS). Addition of SDS in L64 solutions shows mark alteration of different properties. We observed synergistic interaction between SDS and Pluronic L64. The changes in the critical micelle concentration (CMC), critical micelle temperature (CMT), cloud point (CP), micelle size, and shape has been correlated and reported in terms of structure dynamics and mechanics. The ITC titrations have been used to explore the different stages of binding and interactions of SDS with L64. The enthalpies of aggregation for copolymer-SDS aggregates binding, organizational change of bound aggregates, and the threshold concentrations of SDS in the presence of copolymer were estimated directly from ITC titration curves. The effect of temperature on enthalpy values has been reported in terms of different aggregation state. Fluorescence and RTP for L64 were used to investigate the change in micellar environment on the addition of SDS at different temperature. Appearance and shifting of SANS peaks have been used to monitor the size and inter micellar interaction on addition of SDS in L64 solution. Cloud point and viscosity elaborate the penetration of SDS molecule in L64 micelle and hence changing the micellar architect.     

Nickel‐Catalyzed α‐Carbonylalkylarylation of Vinylarenes: Expedient Access to γ,γ‐Diarylcarbonyl and Aryltetralone Derivatives

We report a Ni‐catalyzed regioselective α‐carbonylalkylarylation of vinylarenes with α‐halocarbonyl compounds and arylzinc reagents. The reaction works with primary, secondary, and tertiary α‐halocarbonyl molecules, and electronically varied arylzinc reagents. The reaction generates γ,γ‐diarylcarbonyl derivatives with α‐secondary, tertiary, and quaternary carbon centers. The products can be readily converted to aryltetralones, including a precursor to Zoloft, an antidepressant drug.     

Ultrasonic pretreatment of corn slurry for saccharification: A comparison of batch and continuous systems

The effects of ultrasound on corn slurry saccharification yield and particle size distribution was studied in both batch and continuous-flow ultrasonic systems operating at a frequency of 20 kHz. Ground corn slurry (28% w/v) was prepared and sonicated in batches at various amplitudes (192–320 μm_{peak-to-peak (p–p)}) for 20 or 40 s using a catenoidal horn. Continuous flow experiments were conducted by pumping corn slurry at various flow rates (10–28 l/min) through an ultrasonic reactor at constant amplitude of 12 μm_p–p. The reactor was equipped with a donut shaped horn. After ultrasonic treatment, commercial alpha- and gluco-amylases (STARGEN^TM 001) were added to the samples, and liquefaction and saccharification proceeded for 3 h. The sonicated samples were found to yield 2–3 times more reducing sugars than unsonicated controls. Although the continuous flow treatments released less reducing sugar compared to the batch systems, the continuous flow process was more energy efficient. The reduction of particle size due to sonication was approximately proportional to the dissipated ultrasonic energy regardless of the type of system used. Scanning electron microscopy (SEM) images were also used to observe the disruption of corn particles after sonication. Overall, the study suggests that both batch and continuous ultrasonication enhanced saccharification yields and reduced the particle size of corn slurry. However, due to the large volume involve in full scale processes, an ultrasonic continuous system is recommended.     

Scale effects on strength of geomaterials, case study: Coal

Scale effects on the strength of coal are studied using a discrete element model. The key point of the model is its capability to discriminate between the “strictly sample size” effect and the “Discrete Fracture Network (DFN) density” effect on the mechanical response. Simulations of true triaxial compression tests are carried out to identify their respective roles. The possible bias due to the discretization size distribution of the discrete element model is investigated in detail by considering low-resolution configurations. The model is shown to be capable of quantitatively reproducing the dependency of the maximum strength on the size of the sample. This relationship mainly relies on the DFN density. For all given sizes, as long as the DFN density remains constant with a uniform distribution or if discontinuities are absent in the considered medium, the maximum strength of the material remains constant.     

Pulsed hydrogen/deuterium exchange mass spectrometry for time‐resolved membrane protein folding studies

Kinetic folding experiments by pulsed hydrogen/deuterium exchange (HDX) mass spectrometry (MS) are a well‐established tool for water‐soluble proteins. To the best of our knowledge, the current study is the first that applies this approach to an integral membrane protein. The native state of bacteriorhodopsin (BR) comprises seven transmembrane helices and a covalently bound retinal cofactor. BR exposure to sodium dodecyl sulfate (SDS) induces partial unfolding and retinal loss. We employ a custom‐built three‐stage mixing device for pulsed‐HDX/MS investigations of BR refolding. The reaction is triggered by mixing SDS‐denatured protein with bicelles. After a variable folding time (10 ms to 24 h), the protein is exposed to excess D₂O buffer under rapid exchange conditions. The HDX pulse is terminated by acid quenching after 24 ms. Subsequent off‐line analysis is performed by size exclusion chromatography and electrospray MS. These measurements yield the number of protected backbone N–H sites as a function of folding time, reflecting the recovery of secondary structure. Our results indicate that much of the BR secondary structure is formed quite late during the reaction, on a time scale of 10 s and beyond. It is hoped that in the future it will be possible to extend the pulsed‐HDX/MS approach employed here to membrane proteins other than BR. Copyright © 2012 John Wiley & Sons, Ltd.