Local mean field models of uniform to nonuniform density fluid-crystal transitions

We investigate the existence of nontranslation invariant (periodic) density profiles, for systems interacting via translation invariant long-range potentials, as minimizers of local mean field free energy functionals. The existence of a second-order transition from a uniform to a nonuniform density at a specified temperature is proven for a class of model systems.     

Immunological and biochemical evidence that blepharismin is not a prosthetic group

A polyclonal, multispecific antiserum was raised against a whole 3[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate-extract of nonirradiated Blepharisma japonicum cells. It was used to reveal the composition of solutions that were hypothesized to contain the photoreceptor of the ciliate. A Bio-Gel A 1.5 m fine column chromatography of the extract allowed recovery of a single elution peak isolated by recording the 580 nm light absorbance. Fused-rocket immunoelectrophoresis of this material revealed a large number of > 300 kDa coeluted proteins. Blepharismin-rich material with a molecular mass of approximately 50 kDa, consisting of at least nine proteins was obtained when the same extract underwent preparative isoelectric focusing before column chromatography separation. Purification of the pigment obtained from light-exposed cells gave blepharismin-rich material with a molecular weight of approximately 200 kDa. Comparison of the materials obtained under the same conditions, either from the dark-kept or light-irradiated cells, by means of pore-gradient electrophoresis confirmed that proteins present in the two preparations were different. It revealed only a very small amount, if any, of proteins in the chromatography fractions with the highest absorbance at 600 nm. Results are discussed on the basis of the hypothesis that a specific blepharismin-binding protein does not exist in the protozoan.     

Calculation of Franck-Condon factors including anharmonicity: simulation of the C2H4+X2B3u<--C2H4X1A(g) band in the photoelectron spectrum of ethylene

Our new simple method for calculating accurate Franck-Condon factors including nondiagonal (i.e., mode-mode) anharmonic coupling is used to simulate the C2H4+X2B3u<--C2H4X1A(g) band in the photoelectron spectrum. An improved vibrational basis set truncation algorithm, which permits very efficient computations, is employed. Because the torsional mode is highly anharmonic it is separated from the other modes and treated exactly. All other modes are treated through the second-order perturbation theory. The perturbation-theory corrections are significant and lead to a good agreement with experiment, although the separability assumption for torsion causes the C2D4 results to be not as good as those for C2H4. A variational formulation to overcome this circumstance, and deal with large anharmonicities in general, is suggested.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

DABCO-directed self-assembly of bisporphyrins (DABCO=1,4-diazabicyclo[2.2.2]octane)

Three isomeric zinc bisporphyrins have been prepared by covalently linking together two aminoporphyrins with an isophthalic acid derivative. The porphyrins differ in the substitution pattern on the meso phenyl groups, that is, ortho, meta, or para. Titrations carried out by UV-visible and 1H NMR spectroscopy have been used to map out the stabilities and the stoichiometries of the complexes formed with 1,4-diazabicyclo[2.2.2]octane (DABCO) in chloroform. The ortho- and meta-substituted bisporphyrins form 1:1 intramolecular sandwich complexes. The para-substituted bisporphyrin cannot adopt the cofacial conformation required for this type of complex and forms a higher order 2:2 intermolecular assembly, which is stable over a wide range of DABCO concentrations.     

Flow-through optical fiber sensor for automatic sulfide determination in waters by multisyringe flow injection analysis using solid-phase reflectometry

A software-controlled flow-through optical fiber diffuse reflectance sensor capitalized on the implementation of disk-based solid-phase pre-concentration schemes in a multisyringe flow injection analysis (MSFIA) set-up is proposed for the trace determination of sulfide in environmental waters and wastewaters. The fully automated flowing methodology is based on Fischer's coupling reaction of sulfide with N,N-dimethyl-p-phenylenediamine (DMPD) in the presence of Fe(iii) as oxidizing reagent in a 0.5 M HCl medium. The on-line generated methylene blue dye is subsequently delivered downstream to a dedicated optode cell furnished with an octadecyl-chemically modified (C(18)) disk, while continuously recording the diffuse reflectance spectrum of the pre-concentrated compound. A double regeneration protocol is finally executed to warrant minimum background noise and negligible baseline. Under the optimized chemical and hydrodynamic conditions, the optosensing MSFIA method features coefficients of variation better than 0.7%(n= 10) at 50 microg l(-1) concentration, a linear working range of 20-200 microg l(-1) sulfide, a 3sigma(blank) detection limit of 2.9 microg l(-1) sulfide and an injection throughput of 8 h(-1) for a pre-concentration sample volume of 2.9 ml. The interfacing of the robust and versatile multisyringe flow injection-based optode with a plug-in spectrophotometer furnished with a light emitting diode assures the miniaturization of the overall flow analyzer, which is, thus, readily adaptable to real-time monitoring schemes. The potential of the multisyringe flow method was assessed via the determination of sulfide traces in water samples of different complexity (namely, freshwater, seawater and wastewater).     

Determination of decabromodiphenyl ether in sediments using selective pressurized liquid extraction followed by GC–NCI-MS

A method based on selective pressurized liquid extraction (SPLE) followed by gas chromatography–negative ion chemical ionization-mass spectrometry (GC–NCI-MS) has been evaluated for analysis of decabromodiphenyl ether (PBDE-209) in sediment samples. Instrumental operating conditions such as source temperature and system pressure were optimized in the NCI-MS system, giving an instrumental detection limit of 2 pg. The limit of determination of the entire SPLE–GC–NCI-MS procedure was around 50 pg g^–1 dry weight (dw), with repeatability of replicates between 4 and 21% relative standard deviation. Application of the method to 13 different river and marine sediment samples collected in Spain revealed that levels of decabromodiphenyl ether ranged between 2 and 132 ng g^–1 dry weight.     

Development and in-house validation of a liquid chromatography-electrospray-tandem mass spectrometry method for the simultaneous determination of Sudan I, Sudan II, Sudan III and Sudan IV in hot chilli products

An accurate method based on the use of reversed-phase (RP) liquid chromatography-tandem mass spectrometry interfaced with electrospray (LC-ESI-MS/MS) was devised for the determination of Sudan I, Sudan II, Sudan III and Sudan IV in hot chilli food samples. A simple sample treatment procedure entailing the use of an extraction step with acetone without clean-up was developed. A C18 column with an aqueous formic acid/methanol mixture as the mobile phase was used under isocratic conditions. Mass spectral acquisition was done in positive ion mode by applying selected reaction monitoring of three fragmentation transitions per compound to provide a high degree of selectivity. The method was in-house validated in terms of detection limits (LOD), quantitation limits (LOQ), linearity, sensitivity, accuracy, recovery, and selectivity on two kinds of hot chilli sauces. Good results in the low ng/g level were obtained for LOD and LOQ of all analytes in matrices. Under both intra-day repeatability (R.S.D. between 1 and 13%) and intermediate precision (about 5-15% R.S.D. for both chilli sauce matrices) conditions, precision proved to be typical of determinations based on electrospray LC-MS and acceptable for routine monitoring purposes. Extraction recoveries for all four azo-dyes in chilli tomato sauce ranged from 92 to 103% at a spiking level of 5 microg/kg, whereas values between 72 and 97% were calculated in chilli tomato and cheese sauce at the same concentration level. The applicability of the method to the determination of Sudan azo-dyes in hot chilli products was demonstrated.     

A highly specific polyclonal antiserum to the environmental contaminant 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT)

A very selective polyclonal antiserum against 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (p,p′-DDT) was obtained by a careful choice of the haptenic structure (2,2-bis(4-chlorophenyl)-ethanol hemisuccinate). This hapten was conjugated to BSA to prepare the immunogen. The effects of different types of solid phases on the equilibrium reaction between the hapten on solid phase and the polyclonal antiserum were evaluated to obtain a fine tuning of the antiserum performances in terms of specificity for p,p′-DDT and sensitivity to low levels of this pesticide. The calibration curves obtained show that it is possible to set up a sensitive assay for p,p′-DDT, employing a p,p′-dichlorodiphenylacetic acid-based solid phase, with a detection limit of 0.12 ng/mL and a working range of about 0.21–40 ng/mL. Selectivity towards several p,p′-DDT-related substances was good (o,p-DDT 17%, p,p′-DDD 1.2% o,p-DDD 6.3%, p,p′-DDE 6.7%). Received: 4 November 1996 / Revised: 9 June 1997 / Accepted: 16 June 1997