Numerical method and models for anti-plane strain of a system with a thin elastic wedge

The paper presents a general method to find asymptotics for a (multi-)wedge system containing a thin wedge. It employs separation of the symmetric and anti-symmetric parts of the boundary displacements and tractions of the wedge. The method is applicable when the angle of the thin wedge turns to zero. A physical interpretation of the derived equations is obtained by using power expansions of non-polynomial functions, which appear after the Mellin transform. We establish that the first term in the expansion of the symmetric part corresponds to shear, while the first term of the anti-symmetric part describes deflection of the wedge axis. Numerical experiments, performed by using a code developed on the basis of the theory, show that using only the first terms of the expansions insignificantly influence accuracy: the approximate results coincide with the exact values of roots to the third significant digit even for the wedge angle of 30°.     

Indirect fluorometric determination of diclofenac sodium.

A simple and easy method of analysis for diclofenac sodium is reported. A spectrofluorometric method for the microdetermination of diclofenac sodium has been developed through its reaction with cerium(IV) in an acidic solution and measurement of the fluorescence of the Ce(III) ions produced. Under the optimum experimental conditions for the oxidation reaction, 1.0 M H2SO4 with 90 min of heating time (100 degrees C), the range of application is 124.3-600 ng mL(-1) and the limit of detection is 72.7 ng mL(-1). The proposed method was applied to the determination of diclofenac sodium in pharmaceutical tablets. The results of the analysis show a good agreement with those obtained by the official USP 27 HPLC method.     

Thermal and FTIR spectroscopic analysis of the interactions of aniline adsorbed on to MCM-41 mesoporous material

The adsorption of aniline on Na-AlMCM-41 synthesized by us has been characterized by infrared spectroscopy, temperature programmed desorption (TPD), and differential thermal analysis methods. Aniline would be mostly bound to the mesostructure through weak pi interactions. On the mesostructure containing adsorbed water, the co-adsorption of aniline could occur by weak hydrogen bonding through surface water molecules. For water, two possible modes of adsorption have been identified. Different associations between aniline and hydrated and nonhydrated mesostructures have been evaluated in order to favor the posterior in situ polymerization of adsorbed aniline.     

Design and electro-optical characterization of Si-based resonant cavity light emitting devices at 850 nm

We report on the fabrication and characterization of Si/SiO₂ Fabry-Perot microcavities. These structures are used to enhance the external quantum efficiency along the cavity axis and the spectral purity of emission from silicon rich oxide films that are used as active media to fabricate a Si based RCLED (resonant cavity light emitting devices). A new structure to electrically pump the active media in the resonant cavity has been designed. These structures are fabricated by chemical vapour deposition on a silicon substrate. The microcavities are tuned at 850 nm and present a quality factor ranging from 17 to 150 depending on the number of pairs constituting the dielectric mirrors. An enhancement of the electro and photoluminescence (PL) signal of 20 times is achieved for the selected emission wavelength. These cavities are characterized by TEM analysis to evaluate film uniformity, thicknesses and the densification after annealing processes for temperature ranging from 800 to 1100 °C. The electrical properties of the active media are analyzed. The electroluminescence spectral features are compared with PL spectra correlated with the quality factor of the cavities. The photometric diagram shows also a high directionality of the emitted light within a 30° cone from the sample normal.     

Interactions between imazethapyr and bovine serum albumin: Spectrofluorimetric study

The interaction between imazethapyr (IMA) and bovine serum albumin (BSA) was investigated by fluorescence spectroscopy. The Stern–Volmer quenching constant (K_SV) at three temperatures was evaluated in order to determine the quenching mechanism. The dependence of fluorescence quenching on viscosity was also evaluated for this purpose. The results showed that IMA quenches the fluorescence intensity of BSA through a static quenching process. The values of the binding constant for the formed BSA–IMA complex and the number of binding sites were found to be 1.51×10⁵ M^?1 and 0.77, respectively, at room temperature. Based on the calculated thermodynamic parameters, the forces that dominate the binding process are hydrogen bonds and van der Waals forces, and the binding process is spontaneous and exothermic. The quenching of protein fluorescence by iodide ion was used to probe the accessibility of tryptophan residues in BSA and the change in accessibility induced by the presence of IMA. According to the obtained results, the BSA–IMA complex is formed in the site where the Trp-134 is located, causing it to become less exposed to the solvent.     

‘The mesh method’ in lightning protection standards – Revisited

At present the design of the Lightning protection systems (LPS) for structures as stipulated in standards is based on the electro – geometrical method, which was initially used to protect power lines from lightning. A derivative of the electro-geometrical method is the rolling sphere method. This method together, with the protection angle method and mesh method are used almost in all lightning standards as the measure in installing the lightning protection systems of grounded structures. In the mesh method, the dimension of the cell size in different levels of protection is determined using the rolling sphere method. Since the rolling sphere method does not take into account the physics of the lightning attachment process there is a need to evaluate the validity of the stipulated value in standards of the minimum lightning current that can penetrate through the mesh in different levels of protection. In this paper, meshes of different sizes as stipulated in the lightning protection standards were tested for their ability to intercept lightning flashes using a lightning attachment model that takes into account the physics of connecting leaders on. The results are in reasonable agreement with the specifications given in the lightning protection standards.     

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Enthalpic characterization of activated carbons with different surface chemistry with organic solvents and water

Journal of Thermal Analysis and Calorimetry - Immersion enthalpies of activated carbons modified on their chemical surface were determined in benzene, cyclohexane, hexane, ethanol and water. Three...