Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Dinuclear iron(II)-cyanocarbonyl complexes linked by two/three bridging ethylthiolates: relevance to the active site of [Fe] hydrogenases

Dinuclear iron(II)-cyanocarbonyl complex [PPN](2)[Fe(CN)(2)(CO)(2)(mu-SEt)](2) (1) was prepared by the reaction of [PPN][FeBr(CN)(2)(CO)(3)] and [Na][SEt] in THF at ambient temperature. Reaction of complex 1 with [PPN][SEt] produced the triply thiolate-bridged dinuclear Fe(II) complex [PPN][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)] (2) with the torsion angle of two CN(-) groups (C(5)N(2) and C(3)N(1)) being 126.9 degrees. The extrusion of two sigma-donor CN(-) ligands from Fe(II)Fe(II) centers of complex 1 as a result of the reaction of complex 1 and [PPN][SEt] reflects the electron-rich character of the dinuclear iron(II) when ligated by the third bridging ethylthiolate. The Fe-S distances (2.338(2) and 2.320(3) A for complexes 1 and 2, respectively) do not change significantly, but the Fe(II)-Fe(II) distance contracts from 3.505 A in complex 1 to 3.073 A in complex 2. The considerably longer Fe(II)-Fe(II) distance of 3.073 A in complex 2, compared to the reported Fe-Fe distances of 2.6/2.62 A in DdHase and CpHase, was attributed to the presence of the third bridging ethylthiolate, instead of pi-accepting CO-bridged ligand as observed in [Fe] hydrogenases. Additionally, in a compound of unusual composition ([Na.(5)/(2)H(2)O][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)])(n)((1)/(2)O(Et)(2))(n) (3), the Na(+) cations and H(2)O molecules combining with dinuclear [(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)](-) anions create a polymeric framework wherein two CN(-) ligands are coordinated via CN(-)-Na(+)/CN(-)-(Na(+))(2) linkages, respectively.     

Paired Electrolysis of Aldoses in a Divided Flow Cell

Simultaneous anodic oxidation and cathodic reduction of aldoses in a divided flow cell were studied. The stream of the anolyte was an aqueous solution containing D-glucose, sodium bromide, and sodium bicarbonate. The stream of the catholyte was also an aqueous solution containing xylose and sodium sulfite. The factors which affected both the anodic and cathodic reactions were studied. The results indicate that the flow rates and temperatures of the anolyte and the catholyte, concentrations of the aldoses, pH values and the material of electrodes significantly affect both anodic and cathodic yields. The selectivities of gluconic acid in the anode and xylitol in the cathode were very high. The power consumption of paired electrolysis in the flow system was less than paired electrolysis in a batch system.     

Reactions of RSe− (R = Me,Ph) Groups in [RSeFe(CO)4I and [RSeCr(CO)5−]

The anionic [MeSeFe(CO)₄] and [MeSeCr(CO)₅] complexes were synthesized by reaction of [PPN][HFe(CO)₄] and [PPN][HCr(CO)₅] with MeSeSeMe respectively via nucleophilic cleavage of the Se-Se bond. The ease of cleavage of the Se-Se bond follows the nucleophilic strength of metal-hydride complexes. Methylation of [RSeCr(CO)₅^?] by the soft alkylating agent MeI resulted in the formation of neutral (MeSeMe)Cr(CO)₅ in THF at 0°C. In contrast, the [ICr(CO)₅^?] was isolated at ambient temperature. Reaction of [MeSeFe(CO)₄^?] or [MeSeCr(CO)₅^?] with HBF₄ yielded (CO)₃Fc(μ-SeMe)₂Fe(CO)₃ dimer and anionic [(CO )₅Cr (μ-SeMe)Cr(CO)₅^?] respectively, and no neutral (HSeMe)Fe(CO)₄ and (HSeMe)Cr(CO)₅ were detected spectrally (IR) even at low temperature. Reaction of NOBF₄ or [Ph₃C][BF₄] and [MeSeCr(CO)₅^?] resulted in the neutral monodentate (MeSeSeMe)Cr(CO)₅ complex. Addition of 1 equiv CpFe(CO)₂I to 2 equiv [MeSeCr(CO)₅^?] gave CpFe(CO)₂(SeMe) and the anionic [(CO)₅Cr(μ-SeMe)Cr(CO)₅^?] in THF at ambient temperature.     

Dinitrosyl iron complexes (DNICs) [L(2)Fe(NO)2]- (L = thiolate): interconversion among {Fe(NO)2}9 DNICs, {Fe(NO)2}10 DNICs, and [2Fe-2S] clusters, and the critical role of the thiolate ligands in regulating NO release of DNICs

Dinitrosyl iron complex [(-SC(7)H(4)SN)(2)Fe(NO)(2)](-) (1) was prepared by reaction of [S(5)Fe(NO)(2)](-) and bis(2-benzothiozolyl) disulfide. In synthesis of the analogous dinitrosyl iron compounds (DNICs), the stronger electron-donating thiolates [RS](-) (R = C(6)H(4)-o-NHCOCH(3), C(4)H(3)S, C(6)H(4)NH(2), Ph), compared to [-SC(7)H(4)SN](-) of complex 1, trigger thiolate-ligand substitution to yield [(-SC(6)H(4)-o-NHCOCH(3))(2)Fe(NO)(2)](-) (2), [(-SC(4)H(3)S)(2)Fe(NO)(2)](-) (3), and [(SPh)(2)Fe(NO)(2)](-) (4), respectively. At 298 K, complexes 2 and 3 exhibit a well-resolved five-line EPR signal at g = 2.038 and 2.027, respectively, the characteristic g value of DNICs. The magnetic susceptibility fit indicates that the resonance hybrid of {Fe(+)((*)NO)(2)}(9) and {Fe(-)((+)NO)(2)}(9) in 2 is dynamic by temperature. The IR nu(NO) stretching frequencies (ranging from (1766, 1716) to (1737, 1693) cm(-)(1) (THF)) of complexes 1-4 signal the entire window of possible electronic configurations for such stable and isolable {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-). The NO-releasing ability of {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) is finely tuned by the coordinated thiolate ligands. The less electron-donating thiolate ligands coordinated to {Fe(NO)(2)}(9) motif act as better NO-donor DNICs in the presence of NO-trapping agent [Fe(S,S-C(6)H(4))(2)](2)(2-). Interconversion between {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) and {Fe(NO)(2)}(10) [(Ph(3)P)(2)Fe(NO)(2)] was verified in the reaction of (a) [(RS)(2)Fe(NO)(2)](-), 10 equiv of PPh(3) and sodium-biphenyl, and (b) 2 equiv of thiol, [RS](-), and [(Ph(3)P)(2)Fe(NO)(2)], respectively. The biomimetic reaction cycle, transformation between {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) and {Fe(NO)(2)}(9) [(R'S)(2)Fe(NO)(2)](-), reversible interconversion of {Fe(NO)(2)}(9) and {Fe(NO)(2)}(10) DNICs, and degradation/reassembly of [2Fe-2S] clusters may decipher and predict the biological cycle of interconversion of {Fe(NO)(2)}(9) DNICs, {Fe(NO)(2)}(10) DNICs, and the [Fe-S] clusters in proteins.     

Oxygen binding to sulfur in nitrosylated iron--thiolate complexes: relevance to the Fe-containing nitrile hydratases

Iron-nitrosyl complex containing S-bonded monosulfinate [PPN][(NO)Fe(S,SO2-C6H4)(S,S-C6H4)] (3) has been isolated from sulfur oxygenation of complex [PPN][(NO)Fe(S,S-C6H4)2] (2) which is obtained from addition of NO molecule to [PPN][(C4H8O)Fe(S,S-C6H4)2] (1) in organic solvents. This result reveals that binding of NO to the iron center promotes sulfur oxygenation of iron dithiolates by dioxygen and stabilizes the S-bonded sulfinate iron species. Analysis of the bond angles for complexes 2 and 3 reveals that iron is best described as existing in a distorted trigonal bipyramidal coordination environment surrounded by one NO, three thiolates, and one sulfinate in complex 3, whereas the distorted square pyramidal geometry is adopted in complex 2. Complex 3 further reacts in organic solvents with molecular oxygen in the presence of [PPN][NO2] to produce the dinuclear bis(sulfinate) complex [PPN]2[(NO)Fe(SO2,SO2-C6H4)(S,S-C6H4)]2 (4). Complex 3 showed reaction with PPh3 in THF/CH2Cl2 to yield complex 2 and Ph3PO. Upon photolysis of CH2Cl2 solution of complex 3 under N2 purge at ambient temperature, the UV-vis and IR spectra consistent with the formation of complex 2 demonstrate that complex 2 and 3 are photochemically interconvertible. Obviously, complex 3 is thermally quite stable but is photochemically active toward [O] release. Also described are the X-ray crystal structures of 3 and 4.     

Structural Relationships between the Hemiporphyrazine Macrocyclic Ligand and its Metal Complexes. II.: Planar Neutral Ligand,C26H16N8, and Four Isomorphous Metal Complexes, [M(C26H16N8)(H2O)], M=Mn(II), Co(II), Cu(II), Zn(II)

Crystal and molecular structures of the planar neutral ligand, C₂₆H₁₆N₈, and the four isomorphous five-coordinated metal complexes, [M(C₂₆H₁₆N₈)(H₂O)], M = Mn(II), Co(II), Cu(II), Zn(II), have been determined from three-dimensional X-ray diffraction data. The free ligand hpH₂, C₂₆H₁₆N₈, belongs to the P 2₁/c space group with Z=2, a=4.142(3), b=23.736(6), c=10.338(3) Ä, β=94.66(6)°. The metal complexes monohydrate Mhp-H₂O all belong to the orthorhombic Pcab space group with Z=8. The dimensions are roughly 8.8×19.3×23.7 ų. In each structure, the macrocyclic ligand has an almost planar conformation which differs from the saddle shaped ligand hydrate (hpH₂·H₂O) and the nickel complex [Nihp]⁵. The distances from the center of the macrocyclic ring to the nitrogen atom of the free ligand are 1.907(6) and 2.245(6)Å. The coordination geometry in these four complexes is square pyramidal with a water molecule as an axial ligand. The bond distances of M(II)-O(H₂O), M(II)-N1 (imine), M(II)-N3 (pyridine) are: 2.19(1), 2.00(2), 2.27(2)Å respectively for the manganese complex; 2.08(1), 1.97(1), 2.23(1)Å for the cobalt complex; 2.33(1), 1.92(3), 2.18(1)Å for the copper complex; 2.110(5), 1.964(6), 2.252(6)Å for the zinc complex. The variation of metal-ligand distances can be correlated to the metal d orbital occupancy. A comparison with similar ligands will be presented.