Spectrophotometric Study of Luminol in Dimethyl Sulfoxide–Potassium Hydroxide

The spectrophotometric study of luminol (LH₂) in dimethyl sulfoxide (DMSO), DMSO-water solutions, and alkaline DMSO and DMSO-water solutions has been done, focusing on the effect of the KOH additon on LH₂ absorption and fluorescence properties. The absorption spectra indicate an acid-base equilibrium, and the luminol dianion (L^2–) formation at 3 × 10^–4 – 2.4 × 10^–3 M KOH. The decrease of the fluorescence intensity and the variation of the excitation spectra of LH₂-DMSO-KOH solutions with KOH concentration have been similarly explained. The acid-base process is reversible. The addition of HCl to the solution with 3.0 × 10^–3 M KOH leads to an increase of the fluorescence intensity to its highest value, observed in pure DMSO. The addition of HCl to the LH₂-DMSO solution leads to the decrease of the fluorescence intensity as a result of the LH⁺ ₃ cation formation. In LH₂-DMSO-water, the fluorescence band is shifted from 405 nm to 424 nm and increased in the intensity. In the presence of KOH (in LH₂-DMSO-water-KOH solution) a new band appears, with the maximum at 485 nm and the band at 405 nm decreased. The changes in fluorescence lifetimes also evidence the different chemical species formed.     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Kinetics of photo-active bacteriorhodopsin analog 3,4-didehydroretinal

Kinetics of the photo-induced processes of the transient states of the 3,4-didehydroretinal (3,4-dhr) modified bacteriorhodopsin (bR) was studied by a flash photolysis method in a water suspension at room temperature. The excitation initiated a photocycle with several transient intermediates similar to the trans photocycle of native bR. The main observation of the study was that although major part (80%) of the population of the M state relaxed via the O intermediate as in natural bR, 20% relaxed directly to the bR ground state in 200 ms.     

Charge separation in a nonfluorescent donor-acceptor dyad derived from boron dipyrromethene dye, leading to photocurrent generation

Boron dipyrromethene (BODIPY), which is commonly used as an energy absorbing and transferring antenna molecule, has been modified to contain an electron donor moiety, 8-(2,4,5-trimethoxyphenyl)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (MEOPHBDP). The photoinduced electron transfer from a 2,4,5-trimethoxyphenyl moiety to a BODIPY moiety of MEOPHBDP in acetonitrile was observed by femtosecond laser flash photolysis measurements. The lifetime of the charge-separated state of MEOPHBDP was 59 ps at 298 K. The dye-sensitized solar cells (DSSC) were prepared using MEOPHBDP with carboxylic acid (MEOPHBDP-COOH) and a reference BODIPY dye having no electron donor moiety. The photovoltaic measurements were performed using a standard two-electrode system consisting of a working electrode and a Pt sputtered electrode in methoxyacetonitrile containing 0.5 M iodide and 0.05 M I(2). The photoelectrochemical properties of DSSC with MEOPHBDP are compared with those with a reference BODIPY dye.     

Color Bricks: Building Highly Organized and Strongly Absorbing Multicomponent Arrays of Terpyridyl Perylenes on Metal Oxide Surfaces

Terpyridine‐substituted perylenes containing cyclic anhydrides in the peri position were synthesized. The anhydride group served as an anchor for assembly of the terpyridyl‐crowned chromophores as monomolecular layers on metal oxide surfaces. Further coordination with Zn²⁺ ions allowed for layer‐by‐layer formation of supramolecular assemblies of perylene imides on the solid substrates. With properly selected anchor and linker molecules it was possible to build high quality structures of greater than ten successive layers by a simple and straightforward procedure. The prepared films were stable and had a broad spectral coverage and high absorbance. To demonstrate their potential use, the synthesized dyes were employed in solid‐state dye‐sensitized solar cells, and electron injection from the perylene antennas to titanium dioxide was observed.     

Direct Evidence of Significantly Different Chemical Behavior and Excited‐State Dynamics of 1,7‐ and 1,6‐Regioisomers of Pyrrolidinyl‐Substituted Perylene Diimide

Novel bay‐functionalized perylene diimides with additional substitution sites close to the perylene core have been prepared by the reaction between 1,7(6)‐dibromoperylene diimide 6 (dibromo‐PDI) and 2‐(benzyloxymethyl)pyrrolidine 5 . Distinct differences in the chemical behaviors of the 1,7‐ and 1,6‐regioisomers have been discerned. While the 1,6‐dibromo‐PDI produced the corresponding 1,6‐bis‐substituted derivative more efficiently, the 1,7‐dibromo‐PDI underwent predominant mono‐debromination, yielding a mono‐substituted PDI along with a small amount of the corresponding 1,7‐bis‐substituted compound. By varying the reaction conditions, a controlled stepwise bis‐substitution of the bromo substituents was also achieved, allowing the direct synthesis of asymmetrical 1,6‐ and 1,7‐PDIs. The compounds were isolated as individual regioisomers. Fullerene (C₆₀) was then covalently linked at the bay region of the newly prepared PDIs. In this way, two separate sets of perylene diimide–fullerene dyads, namely single‐bridged (SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀) and double‐bridged (DB‐1,7‐PDI‐C₆₀ and DB‐1,6‐PDI‐C₆₀), were synthesized. The fullerene was intentionally attached at the bay region of the PDI to achieve close proximity of the two chromophores and to ensure an efficient photoinduced electron transfer. A detailed study of the photodynamics has revealed that photoinduced electron transfer from the perylene diimide chromophore to the fullerene occurs in all four dyads in polar benzonitrile, and also occurs in the single‐bridged dyads in nonpolar toluene. The process was found to be substantially faster and more efficient in the dyads containing the 1,7‐regioisomer, both for the singly‐ and double‐bridged molecules. In the case of the single‐bridged dyads, SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀, different relaxation pathways of their charge‐separated states have been discovered. To the best of our knowledge, this is the first observation of photoinduced electron transfer in PDI‐C₆₀ dyads in a nonpolar medium.     

Steady-State and Time-Resolved Spectroscopic Characteristics of Mesoionic Oxazolones Solutions

Three new mesoionic oxazolo[3,2-b]pyridazin-2-one derivatives, in different solutions have been investigated by UV-Vis absorption, steady-state and time-resolved fluorescence methods. The effect of substituents on the extension of conjugation of the pi-electrons from mesoionic oxazolone has been evidenced by bathochromic shifts of the absorption and fluorescence maxima positions. The fluorescence decay data could be fitted to single-exponential or double-exponential function. The lifetime values are much higher in aprotic polar solvents and in the case of the derivatives that present an extension of the conjugation of pi-electrons. The properties of the compounds present a solvent dependence, being tested in micellar solutions as potential molecular probe "sensitive" to the environment polarity.     

Dynamics of photoluminescence in GaInNAs saturable absorber mirrors

Femtosecond time-resolved photoluminescence experiments have been used to study the nonlinear dynamics of novel monolithic GaInNAs/GaAs semiconductor saturable absorber mirrors at 1.08 and 1.55 m. The mirror structures were grown using molecular-beam epitaxy followed by Ni-ion implantation and thermal annealing. We present photoluminescence measurements showing the critical role of post-growth processing on the response time of GaInNAs/GaAs absorber mirrors. PACS 42.65.Re; 42.50.Nn; 42.70.Nq     

Interlayer photoinduced electron transfer in Langmuir-Blodgett films based on porphyrin and phthalocyanine derivatives

Vectorial photoinduced electron transfer was studied in Langmuir-Blodgett films. The monolayers of polythiophene and phthalocyanine were used as secondary electron donors in multilayers together with the monolayer of porphyrin-fullerene donor-acceptor dyad molecules mixed with octadecylamine (1:9). Simultaneous utilization of all the three compounds in the preparation of three-layer samples allowed us to widen the range of the visible light absorption by the structure. The relative sensitivity of the sample to the excitation laser light increased by about 350 times compared with that of a dyad monolayer.