Strong temperature effect on X-ray photo-etching of polytetrafluoroethylene using a 10 Hz laser-plasma radiation source based on a gas puff target

The first results of experiments on direct photo-etching of heated PTFE using a 10 Hz X-ray source based on a laser-irradiated gas puff target are presented. X-ray radiation in the wavelength range from 6 to 20 nm was produced as a result of irradiation of a double-stream gas puff target with Nd:YAG laser pulses of energy 0.8 J and time duration 3 ns. The resulting X-ray pulses with energy of about 100–200 mJ were used to irradiate samples of PTFE to create microstructures by direct photo-etching. Strong enhancement of the photo-etching process was observed for samples heated up to 300 °C. PACS 52.38.Ph; 81.65.Cf; 61.82.Pv     

Free Radicals, Salicylic Acid and Mycotoxins in Asparagus After Inoculation with Fusarium proliferatum and F. oxysporum

Electron paramagnetic resonance was used to monitor free radicals and paramagnetic species like Fe, Mn, Cu generation, stability and status in Asparagus officinalis infected by common pathogens Fusarium proliferatum and F. oxysporum. Occurrence of F. proliferatum and F. oxysporum, level of free radicals and other paramagnetic species, as well as salicylic acid and mycotoxins content in roots and stems of seedlings were estimated on the second and fourth week after inoculation. In the first term free and total salicylic acid contents were related to free radicals level in stem (P?=?0.010 and P?=?0.033, respectively). Concentration of Fe(3+) ions in porphyrin complexes (g?=?2.3, g?=?2.9) was related to the species of pathogen. There was no significant difference between Mn(2+) concentrations in stem samples; however, the level of free radicals in samples inoculated with F. proliferatum was significantly higher when compared to F. oxysporum.     

Laser-produced plasma EUV source based on tin-rich, thin-layer?targets

In this paper a new approach to a laser-produced plasma EUV source based on a tin target is presented. A?thin layer of pure tin and composite layers consisting of Sn with Si, SiO and LiF are investigated. The target composed of several thin layers produces less debris than the other targets and provides a conversion efficiency (CE) in the 13.5-nm±1% band at least comparable to the CE for the pure tin slab target. The largest CE was observed for the target composed of a mixture of Sn and LiF, due to the fact that lithium, similarly to tin, is a strong emitter at 13.5?nm.     

Impact of carbon structure and morphology on the electrochemical performance of LiFePO4/C composites

The electrochemical performance of LiFePO₄/C composites in lithium cells is closely correlated to pressed pellet conductivities measured by AC impedance methods. These composite conductivities are a strong function not only of the amount of carbon but of its structure and distribution. Ideally, the amount of carbon in composites should be minimal (less than about 2 wt%) so as not to decrease the energy density unduly. This is particularly important for plug-in hybrid electric vehicle applications (PHEVs) where both high power and moderate energy density are required. Optimization of the carbon structure, particularly the sp²/sp³ and disordered/graphene (D/G) ratios, improves the electronic conductivity while minimizing the carbon amount. Manipulation of the carbon structure can be achieved via the use of synthetic additives including iron-containing graphitization catalysts. Additionally, combustion synthesis techniques allow co-synthesis of LiFePO₄ and carbon fibers or nanotubes, which can act as “nanowires” for the conduction of current during cell operation.     

Extreme ultraviolet tomography of multi-jet gas puff target for high-order harmonic generation

A volume, tomographic reconstruction of a novel, multi-jet gas puff target, developed for possible applications in high-order harmonic generation (HHG), is presented. The target, produced by pulsed injection of argon gas through nozzle in a form of linearly oriented small orifices, has been characterized in the extreme ultraviolet at 13.5 nm wavelength. Target density estimations were performed, and 3-D representation of pulsed gaseous target has been obtained by combining 2-D shadowgram images, recorded at various rotation angles. More detailed information about higher-order jets, formed as a result of collisions of primary jets, was obtained. Tomographic studies of such type of targets dedicated for HHG have been obtained to our knowledge for the first time.     

The mechanism of HF formation in LiPF6 based organic carbonate electrolytes

Spectroscopic ellipsometry was used to study the time-dependent formation of HF upon the thermal degradation of LiPF₆ at 50 °C in a lithium ion battery electrolyte containing ethylene carbonate and diethyl carbonate. The generated HF was monitored by following the etching rate of a 300 nm thick SiO₂ layer, grown on both sides of a silicon wafer substrate, as a function of the immersion time in the electrolyte at 50 °C. It was found that the formation of HF starts after 70 h of exposure time and occurs following several different phases. The amount of generated HF was calculated using an empirical formula correlating the etching rate to the temperature. Combining the results of the HF formation with literature data, a simplified mechanism for the formation of the HF involving LiPF₆ degradation, and a simplified catalytical reaction pathway of the formed HF and silicon dioxide are proposed to describe the kinetics of HF formation.     

Efficient micromachining of poly(vinylidene fluoride) using a laser-plasma EUV source

In this paper an efficient micromachining of poly(vinylidene fluoride) (PVDF) by direct photo-etching with a laser-plasma EUV (extreme ultraviolet) source was demonstrated for the first time. Mass spectroscopy was employed to investigate the ablation products and revealed emission of numerous molecular species of C-containing fragments of the polymer chain. Chemical surface changes after irradiation were investigated using X-ray photoelectron spectroscopy (XPS). The XPS spectra obtained for PVDF samples, irradiated with low and high EUV fluence, indicate significant differences between chemical structures in near-surface layers. It was shown that irradiation with low fluence results in defluorination and thus carbon enrichment of the polymer in near-surface layer. In contrary, irradiation with high fluence leads to intense material ablation and hardly modifies the chemical structure of the remaining material.     

Water-window microscopy using a compact, laser-plasma SXR source based on a double-stream gas-puff target

We report on a compact, desktop size, laboratory type microscopy setup, based on a short wavelength gas puff target soft X-ray source, which emits incoherent radiation in “water-window” spectral range. The microscope employs a Wolter type I reflective objective and allows capturing magnified images of objects with ~1-μm spatial resolution and exposure time as low as 5 s. A detailed characterization and optimization of both the source and the microscope setups are presented and discussed.