Chalkogenolat-lonen und ihre Derivate. I. Darstellung und Eigenschaften salzartiger Chalkogenophenolate

Chalcogenolates and their Derivatives. I. Syntheses and Properties of Ionic Chalcogenophenolates The syntheses and properties of ionic chalcogenophenolates are described. Using liquid ammonia as solvent the alkali chalcogenophenolates M[EPh] (M = Na, K; E = Se, Te; Ph = C₆H₅) have been synthesized via reduction of the diphenyl dichalcogenides with alkali metals. Similarly, the tetraphenylphosphonium chalcogenophenolates [Ph₄P][EPh] (E = S, Se, Te) have been obtained by reacting alkali chalcogenophenolates with tetraphenylphosphonium chloride.     

Parametrization of multiply differential cross sections

Multiply differential cross sections for two- and three-electron escape are parametrised in terms of generalised tensorial asymmetry parameters. The analysis is based exclusivly on rotational invariance as an exact symmetry for the experimental set up. No approximate assumptions are made on the correlated dynamics of many- electron systems. Results are valid for any atomic and molecular target. The new parameters may be used to describe experimental and theoretical data in a compact way, but also to link e.g. coincidence and non-coincidence measurements with each other.     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

Proton and antiproton impact ionization of atomic hydrogen and helium

Single ionization of helium and atomic hydrogen by the impact of protons and antiprotons is considered. Using a multiple scattering model, first proposed by Garibotti and Miraglia [1], angular and energy distributions of the ejected electrons are calculated. Structures arising in the cross section, especially the Coulomb density of states effect (CDS), are analysed. The contributions of various scattering amplitudes to the cross section are studied. It is concluded that multiple scattering together with the CDS-effect play an important role in determining the transition amplitude. Differences between particle and antiparticle impact are examined. In addition to the different behaviour of the CDS-effect, the interference of two scattering amplitudes turns out to be decisive in ionization by particle and antiparticle impact.     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

镁掺杂氧化铈整体式催化剂催化CO2和CH3OH直接合成碳酸二甲酯

采用共沉淀法成功地合成了不同Mg掺杂量的Ce_1-xMg_xO₂(x=0.05、0.10、0.15、0.20)固溶体催化材料,并运用透射电子显微镜(TEM)、X射线衍射(XRD)、氮气吸附-脱附测试、拉曼光谱、X射线光电子能谱(XPS)、CO₂程序升温脱附(CO₂-TPD)等技术对这些材料进行了表征。结果发现,通过调控CeO₂晶格中Mg的含量,可以调控所制备的Ce_1-xMg_xO₂催化材料的粒径、比表面积、表面缺陷等。其中Ce_0.90Mg_0.10O₂展现了最佳的表面性质,具有最小的平均粒径(约5.8 nm),最大的比表面积(约136 m2·g^-1)以及最高的表面氧含量(31.98%)。将Ce_1-xMg_xO₂催化材料涂覆在堇青石蜂窝陶瓷上制成整体催化剂,考察其对CO₂和CH₃OH直接合成碳酸二甲酯的催化性能。在140℃、2.4 MPa、反应2 h的条件下,Ce_0.90Mg_0.10O₂整体催化剂上碳酸二甲酯的收率高达20.21%,催化效果明显优于CeO₂和其余的Ce_1-xMg_xO₂(x=0.05、0.15、0.20)催化材料。