Gas‐phase interactions of organotin compounds with glycine

Gas‐phase interactions of organotins with glycine have been studied by combining mass spectrometry experiments and quantum calculations. Positive‐ion electrospray spectra show that the interaction of di‐ and tri‐organotins with glycine results in the formation of [(R)₂Sn(Gly)‐H]⁺and [(R)₃Sn(Gly)]⁺ ions, respectively. Di‐organotin complexes appear much more reactive than those involving tri‐organotins. (MS/MS) spectra of the [(R)₃Sn(Gly)]⁺ ions are indeed simple and only show elimination of intact glycine, generating the [(R)₃Sn]⁺ carbocation. On the other hand, MS/MS spectra of [(R)₂Sn(Gly)‐H]⁺complexes are characterized by numerous fragmentation processes. Six of them, associated with elimination of H₂O, CO, H₂O + CO and formation of [(R)₂SnOH]⁺ (?57 u),[(R)₂SnNH₂]⁺( ?58 u) and [(R)₂SnH]⁺ (?73 u), are systematically observed. Use of labeled glycines notably concludes that the hydrogen atoms eliminated in water and H₂O + CO are labile hydrogens. A similar conclusion can be made for hydrogens of [(R₂)SnOH]⁺and [(R₂)SnNH₂]⁺ions. Interestingly, formation [(R)₂SnH]⁺ ions is characterized by a migration of one the α hydrogen of glycine onto the metallic center. Finally, several dissociation routes are observed and are characteristic of a given organic substituent. Calculations indicated that the interaction between organotins and glycine is mostly electrostatic. For [(R)₂Sn(Gly)‐H]⁺complexes, a preferable bidentate interaction of the type η²‐O,NH2 is observed, similar to that encountered for other metal ions. [(R)₃Sn]⁺ ions strongly stabilize the zwitterionic form of glycine, which is practically degenerate with respect to neutral glycine. In addition, the interconversion between both forms is almost barrierless. Suitable mechanisms are proposed in order to account for the most relevant fragmentation processes. Copyright © 2013 John Wiley & Sons, Ltd.     

Alkaline hydrolysis of ethiofencarb: Kinetic study and mechanism degradation

The present paper deals with the hydrolysis of ethiofencarb [2‐ethylthiomethyl(phenyl)‐N‐methylcarbamate] in alkaline solution. The reaction kinetics has been investigated using spectrophotometric and liquid chromatographic techniques. The rate constants were determined following a proposed first‐order kinetic model. The positive activation entropy Δ S^≠ = +100.07 J mol^?1 K^?1 and the absence of general basic catalysis indicated an E1cB hydrolytic mechanism, involving the formation of methyl isocyanate. This result was confirmed by the fact that ethiofencarb fits well into Brönsted and Hammett lines, obtained for a series of substituted N‐methylcarbamate whose decomposition in aqueous media was established to follow an E1cB mechanism. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 118–124, 2013     

Elaboration of some signal processing algorithms in ultrasonic techniques: application to materials NDT

In ultrasonic techniques, information on defect characterization possibilities has required more evolved technique development than classical methods. To obtain a high probability of defect detection, these methods use signal-processing algorithms in order to enhance the signal-to-noise ratio. These methods are also used to discriminate between planar and volumetric defects. In this paper, some signal-processing algorithms are developed and implemented on a computer to allow their utilization in real-time processing of ultrasonics NDT results.     

Numerical investigation of incompressible fluid flow and heat transfer around a rotating circular cylinder

The heat transfer and air flow around an unconfined heated rotating circular cylinder is investigated numerically for varying rotation rates (α = 0–6) in the Reynolds number range of 20–200. The numerical calculations are carried out by using a finite volume method based commercial computational fluid dynamics solver FLUENT. The successive changes in the flow pattern are studied as a function of the rotation rate. Suppression of vortex shedding occurs as the rotation rate increases (α > 2). A second kind of instability appears for higher rotation speed where a series of counter-clockwise vortices is shed in the upper shear layer. The rotation attenuates the secondary instability and increases the critical Reynolds number for the appearance of this instability. Besides, time-averaged (lift and drag coefficients and Nusselt number) results are obtained and compared with the literature data. A good agreement has been obtained for both the local and averaged values.     

Caracterisation par analyse enthalpique differentielle du poly(ethylene-terephthalate) deforme

This study has been undertaken in order to establish an experimental method to characterize strained PET samples by Differential Scanning Calorimetry. We propose a method for sealing the samples to avoid the shrinkage at the glass transition temperature of the polymer. This method allowed characterization of the influence of the polymer chain orientation on the glass transition temperature and correlation of the endo-exotherm exchanges with the semi-crystalline structure of strained PET samples.     

Effects of heat treatment and TiO2 content on the optical properties of Eu3+ doped TiO2–SiO2 thin films

The photoluminescence properties of Eu³⁺-doped TiO₂–SiO₂ thin films were investigated. The films were deposited on silicon substrates by the sol–gel process using the dip-coating method. The molar ratio of TiO₂ content was varied from 25% to 100%, while Europium concentration was fixed to 1%. The obtained films were calcinated at various temperatures ranging from 400 °C to 1300 °C, which allowed determining the optimal conditions for the Eu³⁺ luminescence. Meanwhile, the structure of TiO₂–SiO₂ powders, prepared in the same conditions as the films, was also studied by Raman spectroscopy. It revealed the role of Europium and SiO₂ on the stabilization of the anatase phase and the importance of the silica matrix in the control of titania particle size.     

Properties of NiO thin films deposited by chemical spray pyrolysis using different precursor solutions

NiO thin films have been deposited by chemical spray pyrolysis using a perfume atomizer to grow the aerosol. The influence of the precursor, nickel chloride hexahydrate (NiCl₂·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O), nickel hydroxide hexahydrate (Ni(OH)₂·6H₂O), nickel sulfate tetrahydrate (NiSO₄·4H₂O), on the thin films properties has been studied. In the experimental conditions used (substrate temperature 350 °C, precursor concentration 0.2-0.3 M, etc.), pure NiO thin films crystallized in the cubic phase can be achieved only with NiCl₂ and Ni(NO₃)₂ precursors. These films have been post-annealed at 425 °C for 3 h either in room atmosphere or under vacuum. If all the films are p-type, it is shown that the NiO films conductivity and optical transmittance depend on annealing process. The properties of the NiO thin films annealed under room atmosphere are not significantly modified, which is attributed to the fact that the temperature and the environment of this annealing is not very different from the experimental conditions during spray deposition. The annealing under vacuum is more efficient. This annealing being proceeded in a vacuum no better than 10⁻² Pa, it is supposed that the modifications of the NiO thin film properties, mainly the conductivity and optical transmission, are related to some interaction between residual oxygen and the films.     

Self-diffusion coefficients and structure of the trivalent transplutonium ion curium and gadolinium in aqueous solution

Self-diffusion coefficients D of the trivalent aquo ion Cm³⁺ have been determined in aqueous Nd(ClO₄)₃?HClO₄ solutions (pH 2.5) at 25°C, by the open-end capillary method (O. E. C. M.). The variation of D versus the square root of the concentration of inactive solution is an exponential form in the studied range of concentration. The limiting value D₀ at zero ionic strength is 6.0·10^?6 cm²·s^?1. The curve \(D = f(\sqrt c )\) relating to Cm³⁺ can be compared to those of²⁴¹Am³⁺ and¹⁵³Gd³⁺ obtained under similar conditions. We find a similar ionic structure of Cm³⁺ with Am³⁺ and Gd³⁺. They have the same hydration as a tripositive of 5f and 4f ions in the absence of hydrolysis, complexing, or pairing at pH 2.5. The present study contributes to show the analogy of the solvation structure of trivalent actinide ions in aqueous solution at pH 2.5 with that of the trivalent lanthanide ions as a help for predicting the thermodynamic properties.     

Cut cell strategy for 3-D blast waves numerical simulations

   Abstract. This paper presents the results obtained by a generalized cut cells strategy on 3-D blast waves problems. The mesh is cartesian except when it is intersected by the surface of the solids inserted in the computational domain. The improvement, relatively to a classical cut-cells method, is the treatment of the cut which preserves the real geometry of the surface instead of approximating it by a plane. This approach avoids a loss of precision of the numerical scheme at the boundaries and allows future extension to higher order schemes (). Moreover it is useful for any kind of geometry with a high efficiency in computation time. The drawback is the complexity of the geometrical problems which can rise because of the diversity of situations in the treatment of the cuts. The performance of the approach is tested on a few examples allowing comparisons with experiments or other techniques and physical discussions. Received 15 November 1999 / Accepted 11 July 2000     

Simultaneous measurement of endogenous cortisol,cortisone, dehydroepiandrosterone,and dehydroepiandrosterone sulfate in nails by use of UPLC–MS–MS

Steroid hormone concentrations are mostly determined by using different body fluids as matrices and applying immunoassay techniques. However, usability of these approaches may be restricted for several reasons, including ethical barriers to invasive sampling. Therefore, we developed an ultra-performance LC–MS–MS method for high-throughput determination of concentrations of cortisol, cortisone, dehydroepiandrosterone (DHEA), and DHEA sulfate (DHEAS) in small quantities of human nails. The method was validated for linearity, limits of detection and quantification, recovery, intra and interassay precision, accuracy, and matrix effect. Samples from 10 adult women were analyzed to provide proof-of-principle for the method’s applicability. Calibration curves were linear (r ² > 0.999) in the ranges 10–5000 pg mg⁻¹ for cortisol, cortisone, and DHEAS, and 50–5000 pg mg⁻¹ for DHEA. Limits of quantification were 10 pg mg⁻¹ for cortisol, cortisone, and DHEAS, and 50 pg mg⁻¹ for DHEA. The sensitivity and specificity of the method were good, and there was no interference with the analytes. Mean recovery of cortisol, cortisone, DHEA, and DHEAS was 90.5%, 94.1%, 84.9%, and 95.9%, respectively, with good precision (coefficient of variation <14% for all analytes) and accuracy (relative error (%) −8.3% to 12.2% for all analytes). The median (pg mg⁻¹, range) hormone concentrations were 69.5 (36–158), 65 (32–133), 212 (50–1077), and 246 (115–547) for cortisol, cortisone, DHEA, and DHEAS, respectively. This method enables measurement of cortisol, cortisone, DHEA, and DHEAS in small quantities of human nails, leading to the development of applications in endocrinology and beyond.