Bis(pentafluorophenyl) disulfide as a hydrogen abstractor and an electron acceptor from the resulting radical intermediate

The pentafluorobenzenethiyl radical is an efficient hydrogen abstractor from an activated methylene or methine group and bis(pentafluorophenyl) disulfide is an efficient electron acceptor from the resulting radical intermediate. Thus benzyl-OTBS ether was easily converted into the corresponding pinacol, and 2-phenyl-1,3-dioxanes are converted into the monobenzoates of diols.     

Synthesis of the LMN-ring fragment of the Caribbean ciguatoxin C-CTX-1

Ciguatoxin C-CTX-1 was isolated as a principal causative toxin of ciguatera seafood poisoning in the Caribbean Sea, and is structurally classified as a ladder-shaped polycyclic ether. In this Letter, we report the synthesis of the tricyclic LMN-ring system of C-CTX-1. SmI₂-mediated reductive cyclization efficiently constructed the seven-membered M-ring with the axially oriented 1,3-dimethyl structure.     

Activity evaluation of carbon paste electrodes loaded with pt nanoparticles prepared in different radiolytic conditions

Three Pt-based catalysts prepared in different radiolytic conditions and supported on graphite powder were packed into a carbon paste electrode configuration. They were compared to each other, to the commercial (Pt) deposited on activated carbon powder (Johnson Matthey) and to pure Vulcan XC-72 for their respective abilities toward the hydrogen evolution reaction (HER). The Tafel parameters were determined for all these electrodes. From the I–V curves and their quantitative treatment, the following order of activity emerged unambiguously and reads: (PtCO)₂ (fcc structure) > (PtCO)₁ (Chini cluster) > (Pt)_neat > (Pt)_JM (Johnson Matthey) ≫ (Vulcan XC-72). As expected, all the Pt-loaded electrodes were more efficient than Vulcan XC-72. The classification appears to be linked with the mean nanoparticle size, and for comparable sizes, with the surface morphology of the materials. The results and the stability of the electrodes suggest that the small particle sizes and the good dispersity on the carbon support were maintained during the HER.     

Regioselective synthesis of virazole using benzyl cyanoformate as a synthon

An antiviral nucleoside or virazole was synthesized efficiently and regioselectively starting with benzyl cyanoformate.     

Multi-iron wells-Dawson heteropolytungstates. Electrochemical probing of siderophoric behavior in sandwich-type complexes

The demetalation process of 10 multi-iron Wells-Dawson polyoxometalates is studied by cyclic voltammetry and controlled potential coulometry. Eight sandwich-type complexes (alphaalphaalphaalpha-Na(16)[(NaOH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)], alphaalphabetaalpha-Na(14)[(NaOH(2))(Fe(III)OH(2))(Fe(III))(2)(X(2)W(15)O(56))(2)], alphabetabetaalpha-Na(12)[(Fe(III)OH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)], and alphabetabetaalpha-Na(14)[(Mn(II)OH(2))(2)(Fe(III))(2)(X(2)W(15)O(56))(2)] (where X = P(V) or As(V))) and two monomeric complexes (alpha-Na(11)[(P(2)(Fe(III)Cl)(2)(Fe(III)OH(2))W(15)O(59))] and alpha-Na(11)[(As(2)(Fe(III)Cl)(2)Fe(III)OH(2))W(15)O(59))]) were selected for this study. All 10 complexes show Fe(III) waves which are well-separated from the redox activity of the W(VI) centers. At room temperature and under mild conditions, iron release from the complexes is observed upon reduction of the Fe(III) centers. This release is controlled by the ionic strength of the medium, the nature and concentration of the anions present in the supporting electrolyte, and by the pH of the solution. This behavior parallels those described for most siderophores which depend on the same parameters.     

Titanocene-catalyzed formation of allylsilanes from allyl ethers and chlorosilanes

A new method for silylation of allyl ethers with chlorosilanes has been developed by the use of Cp₂TiCl₂ as a catalyst. This reaction proceeds efficiently at −20 °C in THF using ⁿBuMgCl. A plausible reaction pathway via allyltitanocene intermediate was proposed.     

Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Synthesis of (±)‐Kempa‐6,8‐dien‐3‐ol (=(2aRS,3SR,4aSR,7RS,7aSR,10bSR,10cSR)‐2,2a,3,4,4a,5,6,7,7a,8,10b,10c‐Dodecahydro‐2a,7,10,10c‐tetramethylnaphth[2,18‐cde]azulen‐3‐ol)

The synthesis of kempa‐6,8‐dien‐3β‐ol ( 4a ), as a synthetic leading model of the natural product 4b , was carried out starting from intermediate 12 , the synthetic route of which has been developed previously (Scheme 1). The conversion of 12 to the model compound 4a involved the elaboration of three structure modifications by three processes, Tasks A, B, and C (see Scheme 2). Task A was achieved by epoxy‐ring opening of 41 with Me₃SiCl (Scheme 9), and Task B being performed by oxidation at the 13‐position, followed by hydrogenation, and then epimerization (Schemes 4 and 5). The removal of the 2‐OH group from 12 (Task C) was achieved via 30b according to Scheme 6, whereby 30b was formed exclusively from 30a / 31a 1 : 1 (Scheme 7). In addition, some useful reactions from the synthetic viewpoint were developed during the course of the present experiments.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

Titanocene-catalyzed regioselective carbomagnesation of alkenes and dienes

A new method for regioselective carbomagnesation of alkenes and dienes has been developed by the use of a titanocene catalyst. This reaction proceeds efficiently at 0 degrees C in THF in the presence of Cp(2)TiCl(2) by the combined use of organic halides (R-X; R = alkyl, aryl and vinyl) and n-BuMgCl to afford benzyl, alpha-silylalkyl, or allyl Grignard reagents, which were trapped with various electrophiles. The present reaction involves (i) addition of carbon radicals toward alkenes or dienes in the carbon-carbon bond-forming step and (ii) transmetalation on Ti of benzyl-, alpha-silylalkyl-, or allyltitanocene with n-BuMgCl in the carbon-magnesium bond-forming step. The scope and limitations of this reaction have also been examined.